Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
(33 reviews)
Price: $265.70
In Stock
Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
Item # C13702
Our Price: $265.70
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (33)
- Q & A (0)
- Photos
CURT RV and Camper Hitch - C13702
- Frame Mount Hitch
- 18 - 51 Inch Wide Frame
- 5000 lbs GTW
- Bolt-On
- Weld-On
- 2 Inch Hitch
- 500 lbs TW
- CURT
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.
Features:
- Universal hitch designed for use on RVs and motorhomes
- Heavy-duty side brackets allow for maximum adjustability
- Slide along hitch body to match the width of your vehicle frame
- Work on box frame or C-channel frame
- Let you position tube mounts toward the front or rear, putting the hitch body in the best location for clearance
- Hardware included
- High-gloss black powder coat finish resists rust, corrosion, and is resistant to scratches and UV damage
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Distance between mounting bolt holes: 8-5/8"
- Limited lifetime warranty
Notes:
- For use with RV-approved accessories only.
- The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
- If welding this hitch, all welding surfaces must be cleaned to bare metal or the weld will not be the required strength and may void the warranty.
13702 Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
Installation Details
Customer Satisfaction Score:
84% were satisfied with this product
16% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide - C13702
Average Customer Rating: 4.5 out of 5 stars (33 Customer Reviews)
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.by: Alan S04/12/2018
Bought a new Jeep Wrangler 2-door that I wanted to tow cross country. The existing hitch on my Gulfstream BT Cruiser was only rated at 3500 lbs. and I wanted to upgrade that to 5000 lbs. which was allowable after checking all the weight measurements. Found this adjustable hitch on etrailer.com and thought it would work for me. I mounted the brackets and cross bar temporarily to center the receiver and then mark where I needed to drill into the cross bar. Removed the bar and drilled using a step drill bit and finally the regular drill bit. Mounted everything up loosely, then tightened moderately to make sure everything fit right. Then loosened each bolt, applied red loctite, and torqued to spec. Towed the Wrangler over 4500 this past fall and the hitch worked perfectly. Can't be happier.
by: Buddy R04/11/2020
I called etrailer to get dimensions on a different hitch I was thinking of ordering. Carrie asked a few questions about my vehicle, which is a 2020 model golf cart that is so new, they haven’t made an own hitch for it yet. She then guided me to this adjustable Curt hitch. I am very grateful for her help. The hitch fits well.
by: Joshua08/05/2023
It didn’t fit on our 2021 Winnebago 2306bhs. The tail end of the trailer has too many rivers to find a spot to drill and attach this.
by: Sebastien 09/26/2023
Very sturdy (and heavy !). Use it for 2 e-bikes for thousands of miles with no issue. Once properly set up, Keeps the bikes separated with no banging on each other.
by: Roland05/02/2023
Well made, however would like to see a single through-bolt to secure the cross piece. Vehicle with low ground clearance presents difficuties when required to fish bolts through frame (4 of them). Shipping notification is state of the art.
by: 10/12/2022
Very sturdy build. Easy installation. My only complaint is with the shipping. Etrailer chose to just drop a 50+lb item in a large cardboard box and send it. Thankfully the parts were shrink-wrapped to the hitch and nothing was lost.
by: D2indc08/15/2017
Great product and solid connection to the front of the Discovery 2. Some out of the box thinking to install but most was cutting to fit. All mount points original in frame and slide mounts on hitch were great. Used upside down on mounts and then hung between frame rails.
by: Richard 08/16/2018
Product is very well built and looks nice. You may not want pictures of it, as I am installing it on the front of my pick-up to carry a bike rack. The hitches made for the truck put the hitch right in the middle of the license plate--this one will ride very nicely below the air dam below the bumper.
by: Jennifer07/22/2023
Thanks for the fast delivery you guys are the best
by: Raymond 10/02/2022
Well made very strong package grade box wasn't torn awesome appreciate the fast delivery I got a 2 days quicker than I thought and I appreciate it every bit got it assembled today waiting for the rain to stop trying to get it on Monday thanks again
by: Trenton10/13/2021
Didn't fit on the back of our RV haven't used it looks nice
by: Claudia05/13/2022
The product is perfect! It didn’t do well in shipping. The box was all torn up and two feet of the bar was sticking out. It wasn’t bent and nothing was missing. That speaks to the strength of the product. Poor shipping is the only reason I gave it a 4. The product itself is definitely a 5.
by: John 07/09/2022
Amazing. Had the hitch welded to my fifth wheel to carry our bicycles. Works perfectly
by: Cy11/29/2017
Hitch was perfect and installed easily. The powder coating and hardware were high quality.
by: Jonn09/30/2017
Although its still sitting on the shop floor it looks great and is heavy duty !! and i am very impressed with shipping came 4 days earlier then expected, that is why its still on the shop floor waiting to be installed I pre scheduled it at the time i expected it. at the welding shop . I called them they could not get it in earlier ( I guess they are not etrailer )
by: Brian R12/13/2017
Installed this hitch on a bus conversion. Installation went well with few modifications.
by: James10/22/2019
This hitch is good, and was an adjustable,but too much work for my 2020 transit motor home
by: William 01/04/2023
Perfect fit and fast delivery
by: Mike10/28/2017
Excellent quality, The price was right. Received the product quickly.
Michael H.
10/29/2018
No problems at all. Built for the long haul.
by: Vernon02/21/2022
I love it the only thing is it took 4 hours to install because I had to make adjustments well worth it excellent quality price was right will do business again with you agsin
by: Peter03/08/2019
Good quality product but had to make modifications to make it fit my Cardinal Estate's wide frame. Don't recommend doing that unless you're a good welder
by: Jerry J12/05/2018
Hitch has worked really good. Did a trip to Moab UT. No problems. Very happy with purchase
by: Raymond10/12/2018
Was able to modify this hitch to fit my needs and its working very well.
by: Frederick 10/01/2023
by: David10/03/2022
25
33
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Recommended Universal Trailer Hitch Receiver to Use on a 2008 Coleman FairviewOur most versatile RV hitch receiver is the Curt # C13702 that fits frames 18 to 51 inches wide. It can be welded or bolted onto your Coleman's frame and the additional cross member can then be cut to size.
view full answer... - Dimensions of the Curt Adjustable Width Trailer Hitch C13702I checked with Curt and was able to find a couple of diagrams of the mounting bracket and the receiver portion for the Adjustable Width Trailer Hitch Receiver item # C13702. I have attached them below. The width is adjustable between 22" and 72". I have linked an installation video below so you can see how to get this hitch set up.
view full answer...
- Can Curt Multi Fit Hitch Weld to Fleetwood Wildcat Max RKXX travel trailerThe Curt RV multi fit hitch part # C13702 that you referenced can be welded to your trailer frame and based on your frame design it would be the best way to attach it.
view full answer... - Distance Between Bolt Holes on Curt Adjustable Width Trailer Hitch # C13702The distance from the two bolt holes on each side bracket for the Curt Adjustable Width Trailer Hitch Receiver # C13702 is right at 8-5/8" (center to center). I have also attached a diagram to assist. This adjustable hitch will fit frame widths that are between 18" and 51".
view full answer...
- Could Curt Multi Fit Hitch C13702 Fit Truck FrameYes, the Curt multi-fit hitch part # C13702 that you referenced could be used on a truck.
view full answer... - Are All RV Hitches for a 2004 Fleetwood Tioga Rated for 3,500 lbs?Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of the Tioga's that year because they all have the same listed capacity. The frame on a 2004 Ford E-450 is right around 39" wide. The Adjustable Width Trailer Hitch Receiver item # C13702 you were looking at will fit your Fleetwood Tioga. The hitch...
view full answer...
- Will Curt Trailer Hitch C13702 Fit a 2018 Arctic Fox 27-5lThere isn't any sort of fit list for Curt trailer hitch # C13702 so you would go by the dimensions and how it installs and compare that to the trailer. This hitch is designed to fit frame widths from 18" to 51". Frame width is measured from the outside of one frame rail to the outside of the other. I have included a link to the installation instructions so you can see how it installs.
view full answer... - Recommended Trailer Hitch for Ford E-450 RV with High Towing CapacityFor your RV built on the 2003 Ford E-450 chassis, I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver # C13702. This is a universal, adjustable trailer hitch designed specifically for use on RVs. It can be bolted to the vehicle frame or welded on for a no-drill application. It will fit frame widths of 18 to 51 inches. This Class III trailer hitch has a maximum gross trailer weight of 5,000 pounds but can be increased to 6,000 pounds when used with a weight distribution...
view full answer... - Could Brackets of Curt Multi Fit Hitch # C13702 Mount VerticallyThe side brackets of the Curt multi fit hitch part # C13702 weren't designed to mount vertically but since the crosstube is square there's no reason this wouldn't work. The weight capacity in this orientation would be unknown though.
view full answer... - Front Mount Hitch to Fit a 1972 Chevrolet G30 VanWe have universal trailer hitch receivers that may work for your 1972 Chevrolet G30 but there isn't a custom fit available. None of the universal hitches have been tested on your van but they'll be the best option. The most likely fits will be our universal RV hitches like the Curt # C13702 that is designed to be welded or bolted to frames between 18 to 51 inches wide. I've linked the rest of our selection for you as well. We also have some heavy-duty hitches that may work. I've also...
view full answer... - Weight of the Curt Adjustable Width Trailer Hitch Receiver 13702According to Curt the Adjustable Width Trailer Hitch Receiver # C13702 weighs 45 lbs. This does not include the shipping materials. Attached are the installation instructions and a review video for you to reference as well.
view full answer... - What is the Weight Capacity on the Curt Adjustable Width Trailer Hitch part # C13702The Curt Adjustable Width Trailer Hitch Receiver for RVs part # C13702 has been designed to support 500 lbs. of tongue weight when used with a cargo carrier. When used with a weight distribution system it can handle up to 600 lbs. This is the highest weight rated hitch I am able to find.
view full answer... - What is the Distance From the Curt 13702 Mounting Bracket to the Face of the ReceiverFrom the forwardmost edge of the mounting bracket back to the face of the hitch receiver is going to be about 13-3/4" for the Adjustable Width Trailer Hitch Receiver # C13702 you're looking at.
view full answer...
- Measurements For Adjustable Width Trailer Hitch Receiver for RVsThe distance from the back of cross tube to the face of the hitch tube on the Adjustable Width Trailer Hitch Receiver, # C13702 is 8-3/4". Please see the product review video that is attached.
view full answer... - Recommended Trailer Hitch for 2015 Rockwood 5th-Wheel TrailerWe do offer RV trailer hitches, such as the frame-mount Curt Adjustable Width Trailer Hitch # C13702 that has a 5,000 pound maximum gross trailer weight. This hitch will install on a box frame, C-channel frame or I-beam frame and can be adjusted from 18 inches to 51 inches wide. You will just need to make sure your Rockwood Fifth-Wheel Trailer has the needed towing capacity to pull your boat. This information should be listed in your owner's manual, or you can contact the trailer manufacturer...
view full answer... - Trailer Hitch Recommendation for a 2023 Forest River Sunseeker You're better off with what came on your 2023 Forest River Sunseeker as the largest trailer hitch we offer for trailers is the Adjustable Width Trailer Hitch Receiver for RV # C13702 which has a maximum trailer weight capacity of 5,000-lbs, and has a maximum tongue weight capacity of 500-lbs. Additionally, this trailer hitch will fit trailer's with a frame width of 18" to 52", has a 2" receiver opening, and includes the mounting hardware.
view full answer... - Trailer Hitch Receiver to Fit 1982 Winnebago Warrior on Chevrolet Van ChassisWe don't have any custom hitch receivers confirmed to fit the 1982 Chevrolet van cutaway used for your Winnebago Warrior. But we do have universal RV hitches that may work for you. With 5,000 towing capacity we have the Curt # C13702 which will fit vehicles with frames that are between 18 to 51 inches apart. It can be welded or bolted onto the Winnebago. I recommend verifying the towing capacity of the RV as well because you will be limited by the lowest rated component.
view full answer... - Is There a Trailer Hitch for a 1992 Cadillac BroughamI do have an option for you but they don't have any custom trailer hitch options for a 1992 Cadillac Brougham. That said, you should be able to retrofit a hitch like the Adjustable Width Trailer Hitch Receiver part # C13702 since it has a customizable width and features a pretty standard two bolt pattern. It has a 5,000 lb towing capacity with 2" opening.
view full answer... - Fit of Curt Adjustable Width RV Hitch C13702 on 2019 Forest River Rockwood Roo 233SI'm not certain what you mean by the 'down' version. The # C13702 Curt Adjustable Width Trailer Hitch fits RV frames that are 18-51 inches apart. This hitch has a 2 inch drop which means that the top of the receiver tube would sit 2 inches lower than the frame member the hitch is bolted to. Because this hitch is pretty much a universal fit item, I don't have any information about a specific trailer fit. As long as your trailer has frame members that are between 18-51 inches apart, and...
view full answer... - Recommended Trailer Hitch for Motorhome on 2016 Ford TransitI do have an option for you, however there are not currently any no-drill, custom-fit trailer hitches designed for your 2016 Ford Transit cab and chassis/cutaway. I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13702. This can be either bolted to the vehicle frame or welded on, and can adjust between 18 inches to 51 inches wide to accommodate the frame width of your RV. This offers a 2 inch hitch receiver opening and a maximum tongue weight of 500 pounds,...
view full answer... - Recommended Trailer Hitch for Class B Motorhome with Stretched FrameI do have an option for you but as the frame has been modified, your only option would be a universal trailer hitch like the Adjustable Width Trailer Hitch Receiver for RVs part # C13702 which can be bolted or welded to the frame. It offers a class III capacity up to 5,000 lbs. The side brackets are adjustable so you can pick the exact width and then you'll need to drill a few holes into the frame to secure it.
view full answer...
- Side Brackets on Curt Trailer Hitch C13702 are too Tight to Slide On and Off Hitch TubeThe issue is most likely caused by some excessive powder coating on the brackets, hitch tube, or both for hitch # C13702. It is permissible to sand away excessive powder coat. Some light lubrication will also help. Those two things will probably do the trick but if it still needs a little persuasion might I suggest a rubber mallet rather than a sledge so as not to damage the hitch.
view full answer...
- Need A Trailer Hitch For A 2013 Puma Unleashed Toy HaulerYou can use the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702. To attach to the rear of your toy hauler. It is not recommended to haul a trailer with another trailer. In some states or provinces it may even be illegal. I suggest contacting your trailer manufacturer and give them your VIN. They will be able to tell you the towing capacity of your toy hauler.
view full answer... - Class III Hitch Receiver For A 2014 Rockwood Fifth WheelFor your 2014 Rockwood Fifth Wheel I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide Item # C13702. This hitch can be welded or bolted to the frame and is adjustable for different frame gaps. It is a class III hitch with a 2" x 2" receiver tube opening, has a 500lb max tongue weight rating and a 5000lb gross trailer weight rating.
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video Edited:
Zack K
Video Edited:
Zach D
Written by:
Laura H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
Test Fit:
Ryan G
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
10/19/2021
With universal and adjustable RV hitch receivers, some modifying and tweaking may be needed. This item will only work on box frame or C-channel frame RVs. The main hitch body tube can be trimmed so the ends are flush with the frame brackets, but you will have to repaint the tube. Welding may be easier to get a more custom fit with this hitch receiver, but you will need to file away the powder coat to bare metal in order to get a good weld.