Replacement Landing Gear For Fleetwood Cimmaron

Question:

Thank you for your help. Distance between the brackets on my lift leg is 15. Is there a part that can utilize the existing brackets or as mentioned will I have to remove them and weld on new brackets that come with replacement gear Bd500162. Thanks again for the assist. PS.gear on the lift leg is stripped wont lift should I replace both legs and gear?. 4foot between legs

asked by: Doug W

Expert Reply:

I recommend to measure between weld stops to get the correct landing gear fit. A 15-1/2" measurement between weld stops on landing gear is the standard dimension so if the measurement is closer to 15-1/2" then that means nearly every landing gear set will fit your trailer. If your gear box is stripped out then I recommend to use a whole new landing gear set. I recommend 8,000 lb landing gear set part # RVLG-8000 with 15-1/2" between the weld stops.

expert reply by: Heather A