Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
(26 reviews)
Price: $358.58
In Stock
Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
Item # LC178652
Our Price: $358.58
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (26)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC178652
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear.
Features:
- Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear
- Includes 1 replacement leg
178652 Replacement Follow Leg for Venture Manufacturing Landing Gear by Lippert Components (LCI) - Keystone Montana Fifth Wheel
Video of Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Components Trailer Jack LC178652 Review
Speaker 1: Today we're gonna be taking a look at the Lippert Replacement Follow Leg for your Keystone Montana Fifth Wheel Landing Gear. This is going to be a direct replacement for that OEM landing gear on your Keystone Montana. It comes with the safety clip there and drop leg. You can see there . Just replace the pin back in there, once we get that hole lined up to secure that drop leg. As far as the dimensions on this for the weld stops, they're going to be roughly from the inner edge of the two tallest ones, or from the top one to the first one on here.It's going to be about 15 1/2 inches, the outer dimensions on that are gonna be 17 1/2 inches to the lower weld stop.
The inner dimension is going to be 19 1/2 inches and then the outer dimension will be 21 1/2 inches. The dimension on the outer shaft here from the top to the bottom is going to be 29 1/2. As far as the width of the leg itself, that's gonna be about 2 1/2 inches. That's gonna do it for our look at the Replacement Follow Leg for your Keystone Montana Fifth Wheel Landing Gear.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Defective
- etrailer mistake
Customer Reviews
Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear - LC178652
Average Customer Rating: 4.7 out of 5 stars (26 Customer Reviews)
Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear.by: Fred 10/22/2022
I have not installed yet but looks beefy enough
by: Martin10/16/2021
The packaged arrived in a very short time from the date it was ordered.
When I went to install this leg did not fit the mounting brackets on my 5th wheel. i lined up with the catch locking tabs on the leg, I had to grind a 1/16 of an inch off the middle lower tab so it would catch the top tab correctly. And this leg was strictly for a keystone montana.
Other than that it fit fine and works nice and smoothly.
Martin
10/17/2022
So far no issues with both the front jacks,we are full time RVs and we move about every 3 weeks.
by: Kevin06/09/2022
5 star service but had to grind off 1/8 inch on the slave side and 1/16 inch on drive side of trailer Bevels not a big deal
Kevin
10/6/2022
Perfect no problems
by: Bob06/30/2019
Leg is working great
Not hard to install. Need hydraulic jack made lifting trailer easy
Bob
7/1/2020
Great product
by: Chris08/20/2019
etrailer.com was very knowledgeable in helping me select the correct landing gear follow leg. I received the product in just 2-3 days and it was a breeze to install. I had should a good experience that I will definitely use etrailer.com in the future again.
by: James11/21/2018
Lost a front landing jack while on the road. Rachel got the correct jack to me in 3 days during the Thanksgiving holidays. Super pleased with these guys.
by: Ron01/09/2019
Replacement follower jack fit perfect. I added some additional grease to the gears and leg screw mechanism. A couple of zerk fittings would be beneficial. Bryan was helpful when discussing the purchase. Once again etrailer delivered as promised.
by: Tim11/12/2021
the landing gear has been excellent!! without a doubt was one of my best purchases that I have made online
thank you etrailer for the best on line equipment ......
by: James M07/31/2018
This is listed as a Keystone Montana follow leg jack, but the mounts are on the wrong side for my Keystone Montana. On this leg the mounts that hold the jack from moving up and down are in the same side as the shaft, on my Keystone Montana they are on the opposite side of the shaft. After looking, the lead leg you carry is the same way, which is opposite of mine also. Luckily I was able to pull the guts out and swap them with my old jack so I am up and running again.
by: Trenton 08/08/2022
Perfect replacement piece for my 2010 keystone montana mountaineer 345dbq. We have completely remodeled our entire rig and this was the easiest replacement of any of the work that we did. I'm a DIY guy and this was easier than changing the oil in your car.
by: Gary 06/10/2021
Fix the 5th wheel as it should have.
by: Kimberly H07/20/2021
Excellent help! We needed a jack leg quickly. A lady helped me get the right one quickly. I had tried another website along with a few other camper dealer locations and all could not help in a timely manner. Thank you so much!
by: Scott06/05/2022
The jack was exactly what I had ordered and fit and worked perfectly in my Montana fifthwheel.
by: Ray E05/06/2019
The new landing gear resolved much head ache from the old one, that was repaired multiple times.
by: Steven01/10/2018
Fast delivery. Part worked perfectly. Quick install! The only reason I gets four stars is because it only came with the part and no hardware. On previous videos I’ve watched on YouTube they included hardware. Not on this delivery.
Overall great product, great service, would have been nice to get the hardware.
by: Brian11/19/2017
Product was excellent perfect replacement . Phone call was quick and knowledge of knowing which leg was required
by: Don 10/08/2021
Delivered sooner than I expected Montana specs super duty as ordered. Should be an easy swap. Might also order replacement quick lock for extension at same time.
by: Jason 09/27/2022
Sturdy, great looking legs. And I am a leg man so I would know! :)
by: Paul M10/21/2018
Easy to install and was an exact match for the OEM part.
by: Eric 04/20/2021
Great service, and unlike any of the other places I've tried to deal with they actually have things in stock and are able to tell you when they will arrive.
by: Peter 10/08/2022
by: Brent 09/18/2022
by: William 04/20/2024
by: Diane 07/04/2021
by: Jake 08/17/2022
25
26
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Replacement Landing Gear for 2007 Montana 3500RLI spoke with Lippert and according to them they have a custom set of replacement legs made specifically for the Keystone Montana RV Line. The specific OEM replacement legs for the Keystone Montana's are Follow Leg # LC178652 and the Lead Leg # LC178653. Because of their unique designs they will be the only ones that fit the Montana. The replacement motor for the Keystone Montana is # LG-142178.
view full answer... - Replacement Landing Gear for 2006 34 ft Keystone MontanaSince 17-1/2 inches and 17-3/8 inches is only 1/8 of an inch difference you might have measured incorrectly. You will want to measure the inside-to-inside dimensions of your frame clamps just to make sure. If you for sure measured 17-3/8 inches then you will need to get a qualified welder to move the weld stop to the correct position. The correct replacement landing gear for your application will be part # LC178653 for the Lead Leg and part # LC178652 for the Follow Leg.
view full answer...
- How To Determine If The Replacement Follow Leg For Keystone Montana 5W Will Fit A Keystone Cougar 5WThe Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 is listed as an OEM replacement for a Keystone Montana 5th Wheel, but it is unconfirmed to be a fit for your 2005 Keystone Cougar. However in order to determine if this will work with your Keystone Cougar, you will need to measure the distance between the weld stops, as well as the overall length. This leg measures 17-1/2" between the weld stops, and has an overall length of 29-1/2", so if these dimensions...
view full answer... - Replacement Landing Gear Leg for 2008 Keystone Raptor 3815TS Toy HaulerIt sounds like your 2008 Raptor 3815TS Toy Hauler lead jack and motor work fine but there is an internal issue on the follow jack. From previous customers I know the Raptor has 17-1/2 inches spacing between the weld stops on the legs. If you just want to replace that follow leg, I recommend the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652. If you choose to upgrade to individual motors, I recommend the Reese Electric 5th Wheel Landing Gear Set - 36" Lift...
view full answer...
- Replacement Landing Gear for 2003 Keystone Montana 3280RLLippert made specific replacement landing gear for your 2003 Keystone Montana 5th Wheel 3280RL. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652.
view full answer... - Replacement Landing Gear Legs for 2009 Keystone Montana 5th Wheel Trailer The Keystone Montana RV line actually uses a unique, custom landing gear system from Lippert. Because of this, Lippert produces specific OEM replacement legs that are designed specifically for your 2009 Keystone Montana 5th Wheel Trailer. For the replacement lead leg, I recommend the Lippert Replacement Lead Leg # LC178653. I have attached an image of this replacement leg with its dimensions labeled. I do recommend taking a few measurements on your existing leg in order to confirm this...
view full answer...
- Locating Replacement Landing Gear Leg for 2009 Keystone Cougar 5th Wheel Trailer If the inner leg of the landing gear on your 2009 Keystone Cougar 5th Wheel Trailer is loose and falling to the ground, I recommend replacing the leg altogether. The fact that the inner leg is not staying put indicates an internal issue with the unit. If you are able to locate the manufacturer and model of the landing gear you have installed, I will be happy to make a recommendation. I also recommend taking a quick measurement of the leg to ensure a compatible replacement. For example,...
view full answer...
- Replacement Landing Gear Leg Options For a 2008 Keystone Montana With Legs Not Moving Under LoadIt is possible the screw inside the Lead Leg # LC178653 on your 2008 Keystone Montana may be grooved in such a way that when weight is applied it creates to much resistance for the motor to turn the jacks. We do also carry the Follow Leg # LC178652 if you want to replace them both. If you are thinking about replacing the jacks I recommend upgrading to the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. These each have their own motor which will allow you to operate the jacks...
view full answer... - 2010 Keystone Montana 5th Wheel Replacement Landing Gear ComponentsLippert made specific replacement landing gear for your 2010 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 are the legs. For the motor you'd want # LC142178, and then for the gear box # LG-179015.
view full answer... - Replacement Landing Gear Legs for Montana RV Fifth Wheel Keystone had special landing gear made for their Montana RVs so for replacement legs you'd want the part # LC178653 for the driver leg or part # LC178652 for the replacement follow leg.
view full answer... - Replacement Leveling Leg for 2009 Keystone Montana RVI spoke with Lippert and according to them they have a custom set of replacement legs made specifically for the Keystone Montana RV Line. The specific OEM replacement legs for the Keystone Montana's are Follow Leg # LC178652 and the Lead Leg # LC178653. Because of their unique designs they will be the only ones that fit the Montana. The # LG-179014 will not be a replacement that will work for you. It is important to note that for the Keystone Montana the replacement motor will be # LG-142178.
view full answer... - Replacement Landing Gear for Keystone Montana Fifth Wheel TrailerThe replacement landing gear for the Keystone Montana will require welding if the brackets need to be replaced. The legs you need are # LC178653 for the lead leg and # LC178652 for the follow leg.
view full answer... - Replacement Landing Gear Legs for 2011 Keystone Montana Mountaineer 29RKDYour 2011 Keystone Montana Mountaineer 29RKD does use a unique landing gear system for which the Lead Leg # LC178653 and Follow Leg # LC178652 will work perfectly as replacements. You should be able to use your existing brackets to mount the new legs which would eliminate the need for any welding. The only reason welding would be required is if the brackets need to be replaced with new ones.
view full answer... - Replacement Landing Gear Leg for 2003 Keystone Cougar 286 EFSIf you just need the passenger side which for your trailer is the follow leg, then use # LC178652. If you want to replace both legs use # LC178653 for the driver's side. If you want to replace everything, I recommend the Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs # LC333964.
view full answer... - Determining Which Replacement Landing Gear Legs Fit 2008 Keystone Raptor 37' Toy HaulerI would be happy to help you determine which replacement landing gear jack leg fits your 2008 Keystone Raptor 37' toy hauler, but unfortunately we do not have a break down of the exact components your trailer uses. What you will need to do is identify the model number or manufacturer of your landing gear. We have had reports in the past that Keystone Raptors like yours use Lippert specific landing gear. If that is what your trailer has then you can use the Replacement Follow Leg for Keystone...
view full answer... - Replacement Landing Gear For 2011 Keystone MontanaThe Keystone Montana is unique in that it has its own set of landing gear legs with three weld stops (tabs) instead of two, and the only option we offer for that is a set of replacement legs: - Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 - Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 If you use the bottom-most weld stop (tab) you would have to go with these, however, the distance between the top weld stop and second-to-bottom...
view full answer... - Landing Gear Replacement for 2007 Keystone MontanaLippert made specific replacement landing gear for your 2007 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652. If one leg is still good you wouldn't have to replace both. The lead leg is the leg that the handle attaches to and the follow leg is the one across from that one.
view full answer... - Replacement Landing Gear Parts for 2007 Montana 5th Wheel TrailerLippert actually made a unique landing gear system for your 2007 Montana 5th Wheel Trailer. For the replacement Lead Leg you will use # LC178653 and for the Follow Leg you will use # LC178652. To replace the motor you will need the Stromberg Carlson # LG-142178, which features a 5,500 rpm speed and a 5,500 pound weight capacity.
view full answer... - Replacement Landing Gear Legs For A Keystone Montana 27.5 5th WheelLippert actually made for Keystone Montana 5th wheels, so for your Keystone Montana 27.5 5th wheel, you can use the Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 for the lead leg, and # LC178652 for the follow leg.
view full answer... - Replacement Landing Gear Follow Leg for 2008 Keystone Montana Fifth WheelThe Keystone Montana fifth wheel campers used a unique set of Lippert landing gear so for a replacement follow leg you'd want the part # LC178652 actually.
view full answer... - Replacement Landing Gear for Keystone Montana 34RLWe do have the Lippert landing gear for your Montana but # LC333964 is not the correct part. The Montana line has specific legs designed for it. You'll need # LC178653 for the lead leg and # LC178652 for the follow leg.
view full answer... - 2009 Keystone Cougar Fifth Wheel Landing Gear Follow Leg ReplacementIf you are looking for a replacement follow leg for a Venture landing gear the correct part number is the # LC178652. This jack style is seen on a majority of trailers out there so it's not a surprise that this is a fit. I attached a picture though that has more dimensions including the length of 29-1/2 inches.
view full answer...
- Replacement Landing Gear Legs For a 2010 Keystone Montana 5TH Wheel CamperYour 2010 Keystone Montana uses specific landing gear that is special to the Montana. The Lead Leg # LC178653 and Follow Leg # LC178652 are the ones you are needing. If you find that either the Gearbox # LG-179015 or Motor # LC142178 are bad as well we do have the replacements for them as well.
view full answer... - How Much Travel Does the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear HaveI reached out to Lippert and found that the travel on the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 is 21.5".
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Kathleen M
Written by:
Laura H
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Fred
10/23/2023
Good