Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear
(67 reviews)
Price: $12.33
In Stock
Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear
Item # RVLG-SPP
Retail:$14.56
Our Price: $12.33
You Save: 15%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (67)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - RVLG-SPP
- Camper Jacks
- Trailer Jack
- Pins and Clips
- 3/8 Inch Pull Pin
- etrailer
This spring-loaded pull pin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pull pin on your jack.
Features:
- Replaces the standard spring pull pin from your etrailer or Ram 5th-wheel landing gear
- Pin diameter: 3/8"
RVLG-SPP Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear
Video of Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer RV Parts and Accessories - Spring-Loaded Pull Pin - RVLG-SPP
Micheal.: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the spring loaded pull pin for your fifth wheel landing gear. This is going to replace the standard pull pin on your jack for your fifth wheel landing gear. It is compatible with both the etrailer and the Ram fifth wheel landing gear jack. Basically, it's going to be a lot easier to use than your standard pull pin, because it is spring loaded it will remain attached to your jack so that when you need to raise or lower your jack, you can simply pull on the pin there and raise it up or lower it.
And then because it is spring loaded it will always go back into place. You're not going to have to worry about it coming loose. You're not going to have to worry about taking the pin out and setting it down, forgetting it somewhere or anything like that.This is going to remain attached to your jacks. It's going to be very convenient and very easy to use. The pin diameter is three eighths of an inch.
So, it will work with those three and three eights of an inch holes, and you can see the mounting bracket and all the hardware is included. So, it's going to be very easy to get that mounted in place and then use our spring loaded pull pin to make sure that our legs are locked out. That's going to complete our look at the spring loaded pull pin for your etrailer and Ram fifth wheel landing gear.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear - RVLG-SPP
Average Customer Rating: 4.7 out of 5 stars (67 Customer Reviews)
This spring-loaded pull pin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pull pin on your jack.by: Alan 05/11/2024
Received product on time thanks
Alan I will use trailer again in the future!
by: Richard10/14/2022
New landing does not come with pull pins so I bought these and they fit perfect.
by: Linda08/08/2023
Replacement part works perfect. Much better than trying to use the old bent one.
by: Clifton 06/10/2023
This is one awesome replacement part!! Definitely be back if need any other type of replacement!
by: Spencer10/19/2023
awesome products, awesome prices and awesome service
by: Timothy 07/12/2023
Fit perfectly for a replacement
by: Paul 07/02/2023
It match the orignal factory installed quick release.
by: Scott 09/21/2023
Installed easily and works perfect.
by: Kelly05/06/2022
product was of quality and delivered in timely manner fair priced
by: Brian 09/09/2023
Part was exactly as advertised and at a great price
by: Roland 01/10/2023
It worked great. but I sold the trailer.
by: Allen 07/03/2023
Great to replace the broken one on my c amper
by: David06/29/2021
I like the way these work, they make life easier ... I ordered this as a replacement for one that failed after the 3rd trip
David
6/30/2022
I like the pull pins which allow me to move my 5th wheel legs easily. The only negative has been the pins will pull out of the tubes because the clip inside is not sufficient to hold the sping and pin. I juist keep replacing them as needed, no warranty, Im on my 3rd set ... still like the concept.
Katrina B.
8/1/2022
I apologize for the delay in my response. I have been in contact with the engineering team and they have confirmed that this is a defect that has been addressed and the newest batches of these Spring-loaded pull pins should not have the same issues.
by: Chris 09/07/2022
Perfect. Great value, function perfectly.
Replace your old, sticky landing gear pull pins with these new ones!
by: David 12/23/2022
Slide action of this pull pin is great for the price.
by: David 05/04/2023
web site easy to use, service and delivery very prompt.
by: 03/17/2023
So much better that the pin, it can be over tightened even with a 1/4 wracked so be careful.
by: Henry 06/22/2021
Excellent upgrade to the OEM pins with the wire safety retainer. These spring loaded pull pins make extending the legs so much easier. Excellent product!
by: Rahn04/07/2023
I haven't mounted it yet but it looks like it will do the job.
by: James 07/11/2020
Receive the product in good condition they look great but I have not yet got the chance to install them
by: Jerry M10/21/2020
Best price on the internet. I needed a replacement pull pin and these fit the bill.
by: Robert 06/21/2020
Service was great parts arrived as promised and the quality was as stated.
by: Tinman08/27/2022
Inexpensive replacement.
by: Lori 08/24/2021
It is very sturdy. And easy to put on the trailer.
25
67
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Spring Loaded Pull Pin for Landing Gear With 2-14" Square LegsI believe we may have what you are looking for, but to answer your question the Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP is designed for Landing Gear Set # RVLG-8000 which has a 2-1/2" square leg and a 5/8" pin diameter. What I recommend checking out is the Spring-Loaded Pull Pins for Stromberg Carlson Landing Gear # LG-119113. This is designed as a more universal fit and will work with landing gear that have a 2-1/4" square leg and a 7/16" diameter...
view full answer... - Replacement Spring Loaded Pull Pin For 6,000lb Jacks The Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP is designed for use on etrailer or Ram branded jacks. That being said it's a simple pull pin so as long as your current on is 3/8" in diameter this pin should work. The pin length for this part is 2-5/8". If you measure you current pin and get a different diameter let me know and I can find the correct pin for your application.
view full answer...
- Determining The Correct Replacement Landing Gear For A 21" Weld Stop Measurement I looked through our current inventory and was unable to find a landing gear with a 21" measurement from the top of the top of weld stop to bottom of bottom weld stop so at this point you would have to remove your current weld stop brackets and weld on new ones to install new landing gears. The positive here is that it will open up your possible choices to give you what you want instead of just sticking with whatever is available in the specific size you currently have. You'll want to...
view full answer... - Replacement Landing Gear Drop Leg And Pull Pin For 5th Wheel TrailerWe do not sell that specific piece you reference, however we do sell # LC179014 which replaces the leg and snap pin. You would need to make sure that the measurements match up with your current leg and the weight capacity is appropriate. As far as spring loaded pins go we do have a few options that will work for you, # RVLG-SPP that have a pin diameter of 3/8", and # UF17-943032 that have a 7/16" diameter.
view full answer...
- Spring-Loaded Quick Pins for Landing Gear Leg of 2015 Heartland Elkridge E275Based on the picture of your landing gear it looks like you have Ram jacks on your 2015 Heartland Elkridge E275 which would mean the correct replacement quick pin kit would be the part # RVLG-SPP. That said yours look like they could just be gunked up and if you hit them with a degreaser and a power washer you might be able to get them to free up enough to work again.
view full answer...
- Where to Install Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing GearThe Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP installs wherever the original pull pin was located on your landing gear.
view full answer... - Replacement Pull Pins for Atwood Landing GearI may have a solution for you, but I wasn't able to find any specs regarding your Atwood landing gear. With that said, the Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP is designed for Landing Gear Set # RVLG-8000 which has a 2-1/2" square leg and a 5/8" pin diameter. If your Atwood landing gear are also this size then these would work. You might also be able to use the Spring-Loaded Pull Pins for Stromberg Carlson Landing Gear # LG-119113, which is designed...
view full answer... - Spring-Loaded Pull Pins Replacement for 2016 Gulf Stream Coach Yellowstone SedonaThank you for the picture of your jack leg and it's current pull pin setup. Based on that I can tell that the Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP that you referenced is the correct replacement for it.
view full answer...
- Replacement Landing Gear Spring Loaded Pull Pins For Lippert 2-1/4" Landing Gear With 3/8" PinI checked the Spring Loaded Pull Pins # RVLG-SPP, # LG-119113 and # UF17-943031 that we have that are designed to replace those that are on your Lippert landing gear with the 3/8" pins and they all measured at 2-5/8" long from the mounting edge to the tip of the pin.
view full answer...
- 3 Inch Long Spring Loaded Pull Pin Needed For A 2015 Open Range 5th WheelThe Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP measures 3-5/8" long, which will give you an additional 1/8", and is also 3/8" in diameter. That is the longest size we offer, currently.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Written by:
Mike S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kelly
5/7/2023
Still working fine good product