Review of Draw-Tite Ball Mounts - Fixed Ball Mount - 2753 Video

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

The Malone EcoLight Sport Trailer with J-Style Carriers for 2 Kayaks #MAL93FR can carry kayaks up to 14' long. It also has a weight capacity of 400 lbs. The J-style carriers only have a capacity of 75 lbs so in order to use your 105 lb kayaks you…

Yes, the Bunk Kit #MPG561 that you referenced will fit and work perfectly on the Malone MicroSport trailer as we have confirmed this with Malone in the past that it fits your trailer and it's crossbar size.

With Draw-Tite trailer hitch #75742 installed on your 2014 Honda CR-V the face of the receiver will be almost flush with the rear bumper. It won't stick out quite as far. Take a look at the picture I have included. You can see that the receiver…

The Draw-Tite Class III Max Frame Round Tube Receiver Hitch #75742 referenced in your question is confirmed to fit your 2014 Honda CR-V LX. I did take a look at the online owner's manual for your Honda CR-V and saw that the maximum trailer weight…

The main reason you would use a class III hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver #75742 you referenced is because, the 2" x 2" receiver opening featured on a class III hitch is the most common size for hitch mounted…

It does seem rather odd that Draw-Tite #75742 would construct the hitch with a mount to attach a trailer connector mounting bracket when the trailer connector harnesses for the vehicle are designed to be installed so that the trailer connector is…

The Curt Ball Mount for 2" Hitches part #C84WR has an 8,000 lb weight capacity which is for both rise and drop positions. In regards to fit, this will vary by receiver, some are tighter than others and some are looser. It comes down to both the…

I reached out to my contact at Curt and the Curt Aluminum Ball Mount #C84WR you were looking at measures 1" thick where the hitch ball mounts.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There are two sizes and two classes of hitch offered for your 2015 Mazda CX-5. These are the 1-1/4-inch Class II type and the higher-capacity 2-inch Class III type, such as the Draw-Tite #76138. The linked page will show you all available hitches and…