Malone MegaSport Trailer 1 Kayak Bunk Kit Review Video

Yes, if you install the #MAL33TR on your Malone Microsport you'd still have the same amount of bar space to carry the same amount of kayaks as you did before. This keeps the bars still above the fenders of the trailer so you don't…

The lower crossbars on the Yakima EasyRider Double Decker Trailer #Y08129 are larger than most other crossbars and have a 2" diameter. While most people just mount pads on them and secure the kayaks with tie-downs that way I recommend using…

Its usually easiest to disconnect the trailer from the vehicle and test the trailer functions directly by connecting 12V power from the vehicle (or another) battery right to the various circuits on the trailer plug. This way of testing isolates the…

Yes, the Bunk Kit #MPG561 that you referenced will fit and work perfectly on the Malone MicroSport trailer as we have confirmed this with Malone in the past that it fits your trailer and it's crossbar size.

To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support Tubes…

The Malone MicroSport Trailer #MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit #MPG475 and it comes with the mounting hardware. If you are…

I can certainly help with the dimensions of the U-bolts included with the #MPG561 Trailer Bunk Kit. The inside height of the leg is 3-5/8 inches measured from the end of the bolt to the inside of the top and the span measured inside leg to inside leg…

We don't have the exact bracket replacements you are looking for, however, we do have the Bolt-On Skid Wheel for TorkLift SuperTruss Hitch Extension #TLA7100 that uses all of these same parts and simply has the additional wheel on the bottom to…

Yes, the Bunk Kit #MPG561 that you referenced will fit and work perfectly on the Malone MicroSport LowBed Trailer #MPG464-LB. I verified this with Malone. This kit includes the two 84" x 4" padded bunks and all the needed mounting…

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

Malone doesn't offer just the hardware of the #MPG561 that you referenced. You can only order it with the bunks which would certainly be easier than making them yourself!

We do offer the bunks of the Malone trailer part #MAL73FR separately with the part #MPG561.