Does Malone Bunk Kit MPG561 Fit Microsport Trailer  

To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support…

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

Yes, the Bunk Kit #MPG561 that you referenced will fit and work perfectly on the Malone MicroSport LowBed Trailer #MPG464-LB. I verified this with Malone. This kit includes the two 84" x 4" padded bunks and all the needed mounting…

Yes, if you install the #MAL33TR on your Malone Microsport you'd still have the same amount of bar space to carry the same amount of kayaks as you did before. This keeps the bars still above the fenders of the trailer so you don't…

The Malone EcoLight Sport Trailer with J-Style Carriers for 2 Kayaks #MAL93FR can carry kayaks up to 14' long. It also has a weight capacity of 400 lbs. The J-style carriers only have a capacity of 75 lbs so in order to use your 105 lb kayaks…

There are many ways you can secure wires to a trailer. I would not recommend the use of tape as it will wear out quickly when exposed to the elements. Soldering is also not recommended because it is a more permanent method and you may need to change…

I produced a short video showing how the Wire Frame Clip works on a piece of angle iron. The Principal is the same on a trailer frame and the clip will adhere better to the frame of the trailer because the steel will be thicker. It clips to the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks #MPG2100…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…