Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear
(49 reviews)
Price: $24.67
In Stock
Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear
Item # RVLG-HDL
Retail:$27.45
Our Price: $24.67
You Save: 10%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (49)
- Q & A (0)
- Videos (2)
- Photos
etrailer Accessories and Parts - RVLG-HDL
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- etrailer
Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.
Features:
- Replaces the crank handle from your etrailer or Ram 5th-wheel landing gear set (RVLG-8HDL)
- Durable steel construction with corrosion-resistant zinc-plated finish
- Handle radius: 8-1/2"
RVLG-HDL Replacement Manual Crank Handle for Ram 5th Wheel Landing Gear
Video of Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer and Ram 5th Wheel Landing Gear Replacement Crank Handle Review
John: Hey guys, John here from etrailer.com. Today we're going to take a look at the Replacement Hand Crank for the etrailer.com Landing Gear Set. As I said, it's a replacement hand crank here, so you're going to fit it on the end of your landing gear. This is going to be used for if you don't have the electric gear motor here, or maybe you're at the campsite and you've lost power. This still allows you to operate your landing gear and raise and lower it.It's going to feature a nice long handle, which helps give us some more torque. This landing gear is rated for 8,000 pounds, so depending on your trailer it might be a little more difficult to raise and lower the legs.
As you can see, the grips here, they spin freely, which allows for easier operation of the landing gear. It has a nice clear zinc coated finish which helps prevent rust and corrosion.One thing I would like to point out, a common question I've gotten from customers is whether they can use this with other landing gear sets. It kind of depends. There is no standard dimensions for this fitting, and so your best bet is to just get the exact replacement for your landing gear set. That'll complete our look at the Replacement Handle here for the etrailer.com Landing Gear.
Thanks for watching.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear - RVLG-HDL
Average Customer Rating: 4.7 out of 5 stars (49 Customer Reviews)
Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.by: Lyn 05/01/2023
Exactly what we needed, great product, delivered fast!
by: Sandra 07/06/2023
Easy to order and works great on my camper. One of the electric jacks won’t work so it was truly needed. Thank you!
by: Sean 03/18/2024
Just as described.
by: Michael 03/07/2024
Exactly what I needed with fast delivery
by: Roger 08/01/2023
Fit properly. Good quality for the money. I suggest you offer a replacement roll pin or a conversion to a3/4 “ socket. Thank you
by: Eugene 08/17/2023
Ideal for my application
by: Spencer10/19/2023
awesome products, awesome prices and awesome service
by: Michael 10/17/2023
Received in good order, Thank you...
by: Curt / Iowa01/12/2023
Ordering these was a no brainer for our oversized Toy Hauler, the capacity rating was almost double and the physical dimensions were exact replacements for the worn out originals. It only took about an hour start to finish on the install for me to do by myself. I couldn't be happier that I can now raise and lower the trailer via the switch again!
by: Zachary04/10/2023
Perfect replacement for my bent one.
by: Dean M Jensen 10/04/2017
Recieved the product and have installed half of it,got the unit in today looks good ,works well.
by: CallMeColt07/06/2019
Great value! I actually got this to use with a military trailer that was missing the handle to crank the jack up & down. Much cheaper than finding the surplus part.
by: David10/10/2017
I purchased this handle along with new landing gear, but it didn't actually work. My camper has a smaller guide tube that this handle won't fit inside. The old handle worked fine, my mistake. The new handle is also longer. It is good quality and nicer than my old one. I am happy with the purchase, and I can use it on something else, but I didn't need to buy it.
by: Larry 09/21/2018
Product is as described and is of good quality. I bought it as a (replacement) backup for the electrically operated legs on my fifth wheel.
by: Shayne08/11/2019
Great product. Took less than an hour to replace the old landing gear with the etrailer brand. Was a direct replacement with no problems. Shipping was fast.
by: Lane 03/30/2020
Works very well for my application (military trailer).
by: Mike06/06/2019
Pretty easy install and lifts my heavy toyhauler easier
by: Phil k10/13/2017
As advertised came quick, easy order ,
Good price free shipping ??
by: Leah 09/11/2020
It came faster than I thought it would. Haven't tried it yet. But from what I have learned it is exactly what we need to open up our pop outs. Thank you for such fast delivery.
by: Lance05/25/2022
Arrived timely and works as expected. Simple transaction
Thank you
by: Brenda 02/26/2021
Works great!
by: Alex 12/19/2019
Great tool.
by: Steve05/24/2022
Very quick shipment and packed very well. Will use again
by: Dennis 11/13/2021
Order get here in good time and its what I order.
by: Donnie04/07/2017
Great tool perfect
25
49
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Depth of Slot on RVLG-HDL and LC119226 Replacement 5th Wheel Landing Gear Crank HandlesOn the Lippert # LC119226, the slot in question is 1/4 inch wide by 3/8 of an inch deep, on the # RVLG-HDL it measure 1/4 inch wide by 7/16 of an inch deep. You can see these photos in the photo I've provided.
view full answer...
- Best Replacement Landing Gear Crank Handle for 1988 Carri-Lite 5th Wheel TrailerWe offer several styles of replacement landing gear crank handles that you can see on the page I linked for you. Although we have no way to look up the original landing gear installed on your 1988 Carriage Carri-Lite 5th wheel it is very likely that you have Lippert landing gear. You should be able to use either of these parts, etrailer # RVLG-HDL, Lippert # LC119226 which is the item you referenced in your question, or Stromberg Carlson # LG-119226.
view full answer... - DIameter of Replacement Crank Handle for Landing GearThe inside diameter of the end of the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL is 1/2 inch, and the outside diameter is 13/16 inches.
view full answer...
- What Is The Difference Between The Landing Gear Set RVLG-8000 & RVLG-8HDL?The only difference between the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-8HDL that you mentioned, and the Landing Gear Set # RVLG-8000 is that # RVLG-8HDL comes with the handle, whereas if you were to go with # RVLG-8000 you'd need to purchase the handle separate with # RVLG-HDL. Both of these systems are rated for the same 8,000lbs capacity limit, and have 36-1/2" of total lift. Additionally, both of these can also be upgraded from manual to electric...
view full answer... - Is Replacement Gearbox for Landing Gear with Atwood 75721 Motor AvailableI did some checking and it looks like there aren't any replacement gearbox or even motor parts for your Atwood landing gear so if you believe that the issue is related internally you will unfortunately need to get a new landing gear set. The 8K Landing Gear Set # RVLG-8000 should fit directly with what you have as the weld stop locations are the typical 15-1/2" and 171/2" measurements (see attached photo). You can use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 with the...
view full answer...
- Replacement 8,000 lb 5th Wheel Landing Gear Set for 5th Wheel Toy HaulerThe Landing Gear Set part # RVLG-8000 is rated for 8,000 lbs like what you believe your current landing gear's weight capacity is. It also has a leg height of 32-3/4 inches to 53-1/4 inches giving you a travel of 20-1/4 inches which will work well for your application. This jack can be operated manually using part # RVLG-HDL or with a 12V DC motor using part # LC142178. The weld stops on this landing gear set have distance of 15-1/2 between the bottom of the upper weld stop and the top...
view full answer...
- Replacement Landing Gear Needed for a 2006 Big Horn with Part VMC900L-181526 Landing GearAlthough I don't know exactly what landing gear you have on your 2006 Big Horn, I can help you find some replacement landing gear. The part VMC900L-181526 that you referenced looks to be some Venture landing gear from the first digits "VMC900L". If you check the weld stops on your landing gear they should measure 15-1/2" on the inside and 17-1/2" on the outside (see attached picture). If this is the case then you can use the Landing Gear Set # RVLG-8000 which has 20-1/2" of travel and...
view full answer...
- Replacement Landing Gear Needed for 2006 CL4005 5th Wheel TrailerI have a recommendation for a completely new landing gear set but if you're wanting to just replace your motor and gearbox then I'd need to know what exact 5th wheel landing gear kit you have installed to see if we have something that is compatible. For a replacement landing gear set I highly recommend the Landing Gear Set # RVLG-8000 because it uses the standard 15-1/2" and 17-1/2" weld-stop locations plus it has an 8,000 lb weight capacity. This comes with a gear box installed so you...
view full answer...
- Replacement Landing Gear Set for a 1991 Avalon 5th Wheel TrailerTo choose the correct replacement landing gear set you simply need to determine the spacing between the weld stops on your current landing gear set. The standard measurement is 15-1/2" inside to inside or 17-1/2" outside to outside. For this measurement I recommend the Landing Gear Set # RVLG-8000 because it gives you 36-1/2" of lift and is rated for 8,000 lbs. For this you can either use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 and Switch # LG-145236 for operation. If...
view full answer...
- Diameter of Crank Handle for 8,000 Pound etrailer.com Landing Gear SetThe Crank Handle # RVLG-HDL has an inner diameter of about a 1/2 inch on the slotted end. It's designed to be used with Landing Gear Set # RVLG-8000.
view full answer...
- Will etrailer Landing Gear RVLG-8000 Fit a 2004 Sprindale 249BH 5th Wheel TrailerThe standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the landing gear legs which is what etrailer set # RVLG-8000 uses. Provided your old landing gear is the same this kit will fit. If you want to add the manual crank handle it is # RVLG-HDL. And you can also add a motor using # LC142178 and switch # LG-145236 to make it a powered set.
view full answer...
- Will etrailer Landing Gear RVLG-8000 Fit a 1994 Terry 5th Wheel TrailerLanding gear set # RVLG-8000 will likely fit your 1994 Terry 5th wheel trailer. The size of the jack tubes are standard for 5th wheel jacks and the stop in the legs for the frame clamps have a standard spacing. I have included a picture showing the stop measurements on the legs so you can compare that to your existing set. If that and the other measurements match up then this kit is a great option. The hand crank is available as a separate item and is part # RVLG-HDL. Or you can add a...
view full answer...
- Recommendation for Replacing Bevel Gears for Atwood Landing Gear or Replacing Entire Landing GearSince Atwood is no longer in the landing gear making business and you have an older 5th wheel trailer I recommend just replacing your entire landing gear set. This not only gives you peace of mind that everything is in good shape but it also makes tracking down replacement/repair parts in the future much easier. For your application I recommend the Landing Gear Set # RVLG-8000 which has up to a 36-1/2" lift and is rated for 8,000 lbs. This cost-effective option comes with the landing gear...
view full answer...
- Replacement Landing Gear for 1989 Nu Wa Hitchhicker 5th Wheel TrailerThe Landing Gear Set # RVLG-8000 will work but you will have to have the weld stops removed and new ones welded on. If you check out the attached picture you can see where the inside distance of the weld stops measures 15-1/2". Even with those brackets mounted on the inside the distance between them would be about 11-1/2". Even though you will have to have the weld stops relocated I recommend using this landing gear set because I have never heard of the weld stops being located where...
view full answer...
- Will etrailer Landing Gear Fit a 2013 Columbus 320 RS 5th Wheel TrailerYou can use the etrailer landing gear set # RVLG-8000 on your 5th wheel trailer. As it comes it is a manual set and you will need crank handle # RVLG-HDL. You can also add a motor to the system using # LC142178.
view full answer... - Inside and Outside Diameter of Slotted End on Replacement Crank Handle RVLG-HDLThe inside diameter of the portion of the handle that fits into the jack, is approximately 1/2 inches, while the outiside diameter is closer to 13/16 inches. The etrailer Crank Handle # RVLG-HDL is designed to be used with Landing Gear Set # RVLG-8000.
view full answer...
- Needed Landing Gear Capacity for 5th Wheel Toy Hauler w/ 11,000 GVWRThe # RVLG-8000 would be a great choice. Since the axles will be supporting a good percentage of the weight when the landing gear are being used, a set of landing gear with a 8,000 lb capacity would be perfect. This supports more than half the maximum amount of weight the trailer will ever hold, so you'll have plenty of capacity plus some in reserve. Having more capacity than needed means that the landing gear won't need to work as hard and therefore you should get more life out of them....
view full answer... - Is there a Way to Identify 5th Wheel Trailer Landing Gear with No MarkingsIt is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you haven't already. Many landing gear parts are interchangeable among the different manufacturers but this is not always the case so identifying the manufacture and/or model number is important. Another option is to replace the landing gear with an...
view full answer... - Compatibility of Landing Gear # RVLG-800 with 2011 Heartland Big Country 3450ts TrailerThe etrailer.com Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 will fit your 2011 Heartland Big Country as long as the legs are a minimum of 44-1/2 inches in between and a maximum of 72 inches apart. The weld stops measure 15-1/2 inches inside to inside and 17-1/2 inches outside to outside. I've attached a picture to assist. The hand crank is available as a separate item and is part # RVLG-HDL.
view full answer...
- Is the etrailer.com Landing Gear Set RVLG-8000 a Replacement Fit for a 1998 Sandpiper 5th WheelOur Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 has the weld stops in the standard dimensions where the inside measurement of the weld stops is 15-1/2 inches and the outside measurement is 17-1/2 inches (see attached picture). Since we do not have access to every trailer and RVs landing gear specs you will need to go measure where the weld stops are on your current landing gear. These should fit though since they use the standard weld stop locations. You have the option of...
view full answer...
- Best Landing Gear Upgrade Options for 5th Wheel TrailerWe do have motors that you can add to your landing gear. For example, the Landing Gear Set # RVLG-8000 can be operated with the manual crank # RVLG-HDL but you can also add the motor # LC142178 and switch # LG-145236 for effortless operation on your end. The next upgrade for landing gear is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This is rated for up to 12,000 lbs and operates via separate motors so you can easily level your 5th wheel trailer without using blocks...
view full answer...
- How to Choose the Correct Replacement Landing Gear for 5th Wheel TrailerThere are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the replacement is rated for at least the same amount. The next step is making sure that the replacement landing gear has weld stops in the same locations as your current landing gear. This lets you replace the landing gear without having to do any...
view full answer...
- Landing Gear Not Working on NUWA 2000 Snowbird 5th Wheel TrailerIf the landing gear is electrically operated and the motor makes noise but the legs do not move then it could just be that the battery does not have enough charge to run the landing gear. You can have the battery tested at an auto parts store. If the battery is fine and the motor makes no noise then you may just need to replace the switch. If you did raise the jacks too high then it could have damaged the threads on the screw and nut which would mean that you would need to replace the...
view full answer... - Compatibility of Replacement Crank HandleThe Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL is designed to be a replacement handle for Landing Gear Set # RVLG-8HDL. Replacement handles attach to landing gear in a number of ways so they need to be matched with their manufacturer. For example, # LC119226 is a replacement manual crank for Lippert Components landing gear. Once you take a look at the manufacturer of your landing gear, just go to the link I've attached which has each of our available...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Joshua S
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Amanda M
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lyn
5/2/2024
its been a year and still works great