Replacement Crank Handle for Lippert Manual Scissor Jack
(23 reviews)
Price: $29.60
Replacement Crank Handle for Lippert Manual Scissor Jack
Item # LC285324
Retail:$31.50
Our Price: $29.60
You Save: 6%
In Stock
- All Info
- Reviews (23)
- Q & A (0)
- Videos (2)
- Photos
Lippert Accessories and Parts - LC285324
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Lippert
Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.
Features:
- Manual crank handles can become easily lost at the campsite. Order your replacement crank handle here!
- Standard Lippert Components manual scissor jack crank handle
- Can also be used with Lippert power tongue jacks in the event of a power failure
- 3/4" Hex socket
- 90-Day warranty
285324 Replacement Crank Handle for Lippert Components Manual Stabilizer Jack
Video of Replacement Crank Handle for Lippert Manual Scissor Jack
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Manual Scissor Jack Crank Handle Replacement Review
Hey everybody, Ryan here at etrailer. Today, we're gonna be checking out the Lippert scissor jack and spare tire winch tool. What this is gonna allow you to do is make it quite a bit more easy to operate your scissor jacks in case of, if you have a electrical failure or anything like that and have to do it manually. Or, if you just happen to have manual scissor jacks. This is gonna work with the Lippert-type scissor jacks and just about any of the other ones, honestly, as long as the part that you have to turn is a 3/4-inch six-point type head bolt or socket, I guess you could say, this is gonna fit it. So, you know, that's going to allow you to put that on there and lower and raise those scissor jacks main a little.
So, I mentioned this is also going to work with the Lippert spare tire winch and actually, today, that's what our customer is gonna be using this for. We installed that on earlier. So, you know, having this is gonna allow us to go to our spare tire winch, and in the event, if we get a flat tire, we're gonna be able to easily lower and raise our tire back in position. We just want to give you guys a few measurements, that way, if you need 'em you got 'em. My thought was if your jack happened to be way underneath there, you know it's just gonna be long enough to reach without, you know the handle hitting the bottom of your camper or your trailer, whatever.
So, from bottom to top overall length of this is going to be about 28 1/2 inches. And if you go from the bottom to where this starts to bend, it's going to be roughly 14 1/2 inches. And then the actual bend here, so where it starts to go up from the ground to the top of that is going to be about 6 1/4 inch. Other than that though, I mean, a pretty straightforward tool. If you're looking to just have an extra one or if you lost your old one to be able to operate those scissor jacks or the Lippert spare tire winches, this is one you really can't go wrong with.
And that'll finish up our look at of the Lippert scissor jack and spare tire winch tool..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Crank Handle for Lippert Manual Scissor Jack - LC285324
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.by: Deb05/11/2023
When I took our Class C to etrailer, they used their ingenuity and installed my spare tire carrier in a way that I could raise and lower it from the back of the unit instead of having to crawl under it. That was incredibly ingenious and I was totally thrilled!!! Great job etrailer!!!
by: Dell 03/01/2024
Fast shipping Great service as usual.
by: Ted02/16/2023
The crank will work, but not the same quality as the original. The original had metal sleeves/grips and a flexible socket pinned in place rather than welded.
by: Barry02/08/2023
Haven’t really had time to open the boxes I had to have surgery on my leg. I hope to get out in my shop tomorrow.
by: JasonD 07/01/2019
Handle does what it was meant to do, but our old handle had another grip at the end to aid in cranking instead of holding on to the metal.
by: Arthur S.06/12/2015
The items was exactly as described and what I was looking for. The service from etrailer.com was excellent. The item was at my door much earlier than I ever expected. The price was lower than Amazon where I do a lot of buying, even with the shipping.
by: Rufus04/11/2022
Perfect! Sorry dealer did not include with purchase of the electric jack. Just what I needed at a fair price!
by: Robert11/28/2020
Received products with no damage,and in a timely manner,no hassle,no problem!! Thanks etrailer.com
by: Garvin08/18/2022
worked great. No problems
by: Rodney05/01/2022
It was the right one and it works great
by: Jeffrey 10/10/2023
by: John 12/14/2020
Great customer service! Thank you!!
by: Michael l07/02/2016
Well made exactly what I was looking fo r,thanks.
by: Joseph 09/17/2022
by: Kenneth09/28/2020
by: Peter 03/14/2024
by: Enco08/19/2022
by: Daniel R03/02/2021
by: Jody11/02/2022
by: James 11/12/2021
by: Raymond 11/18/2022
by: Joseph 02/12/2021
23
23
See what our Experts say about this Lippert Accessories and Parts
- Installing Lippert Spare Tire Winch with CableThere aren't any instructions for just the Lippert Components Spare Tire Winch with Offset Cable # LC159056 at all, but you will need to find a way to bolt it onto the underside of your RV frame; the mounting holes are 5-1/4" apart on center and I have added a photo from a customer which shows how they did it on their trailer. There are instructions for the RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041, which I have linked for you that will require you bolt to your chassis....
view full answer...
- Replacement Override Nut and Crank Handle for Lippert Powered A-Frame JackWe have the replacement override nut with the part # LC55FR and also the replacement crank handle part # LC285324. The size is a 3/4 inch hex socket if you had a ratchet and socket set nearby.
view full answer... - Can Electric Motor be Installed on Lippert Scissor Stabilizer JackAs long as you are able to get the motor to fit the Lippert Scissor Stabilizer Jack # LC285325 I see no problems with doing that. Typically you'd use the Manual Hand Crank # LC285324 to operate the jack which has a 3/4" socket. It would also be worth noting the various dimensions of this stabilizer jack. I have attached some photos to this answer page for you to reference and compare with what you currently have. Please note that this jack is only meant to help stabilize your trailer and...
view full answer...
- Manual Crank For Bulldog Velocity Series Electric Landing Gear Jack BD185402The Bulldog Velocity Series Electric Landing Gear Jack 185402 is a maintenance-free jack so there are no grease points on it. In regards to the manual crank, it simply requires one with a 3/4" hex socket, so you can use one of the following: - Replacement Crank Handle for Lippert Manual Scissor Jack # LC285324 - Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks # UF48-979005
view full answer... - Long Stabilizer Jack Crank Handle With 3/4 Inch SocketThere are stabilizer jack handles with a 3/4" socket that have some length to them, but not quite the 16 inches you are looking for; the closest would be the Replacement Handle for Scissor Jacks # BAL-24033. This handle measures 27-1/2" long overall and 14" from the end of the socket to the first bend.
view full answer... - Correct Replacement Handle for Lippert Electric Trailer Tongue JackThe correct replacement manual override handle for a Lippert tongue jack is the Lippert Electric Trailer Jack with Footplate part # LC285324. If the photo you have attached is of the jack you need a handle for then it will work though I am a bit confused by the way you have described this. It's a simple hex nut is all. The socket will slip over the hex nut allowing the leg to extend/retract.
view full answer...
- Replacement Crank Handle For A Lifetime Folding Trailer If you Lifetime folding trailer utilizes a 3/4" hex override nut, then the Replacement Crank Handle for Lippert Manual Scissor Jack # LC285324 will work just fine.
view full answer... - Replacement Crank Handle For the Lippert Spare Tire Winch with Offset CableWe do have something like that. The Lippert Spare Tire Winch with Offset Cable # LC159056 use the Crank Extension for Lippert Spare Tire Winch Assemblies # LC1315411 which attaches to the winch. You would then use the Replacement Crank Handle for Lippert Manual Scissor Jack # LC285324 to raise and lower the spare tire.
view full answer... - Underbody Spare Tire Options for 5th Wheel TrailerWe have a few different spare tire carrier options for a trailer but you might have to get creative since you have the covered underbelly. The simplest option we have is the Lippert Spare Tire Winch # LC159056 which you mount to your trailer frame and then you also need the Handle # LC285324, Extension # LC1315411, and Cotter Pin # 165649 for everything to work properly. The next option up is the Lippert RV Spare Tire Carrier with Winch # LC159041 which comes with braces that mount to...
view full answer... - Will Lippert LC159041 Spare Tire Carrier Fit on a 2022 Rockwood Mini Lite 2509sThe Lippert # LC159041 isn't a RV-specific product. Lippert doesn't provide us a list of which RV's it fits or doesn't fit. However, there is a way you can determine if it'll work for you. The carrier has an overall width of 71 inches, so if the frame members of your travel trailer are 71 inches apart, measured outside to outside, the # LC159041 would work just fine for you. This carrier is designed to attach to the frame members under the rear of the travel trailer, not at the trailer...
view full answer... - Where to Connect Manual Crank on Lippert JackThe manual crank # LC285324 is inserted into the top of the head unit for the Lippert Electric Trailer Jack # LC285318. You first need to remove the rubber plug to gain access to the attachment point (see attached photo).
view full answer...
- Manual Crank Handle Replacement for FIC-3500 Electric Trailer JackWe don't carry the Fastec FIC-3500 electric tongue jack or parts specifically for it. From what I read in online forums both parts and documentation for this imported jack are hard to come by. I was able to find the owner's manual online but it only identifies the manual crank by a part code "J" with no dimensions or details. What you might do is measure both the hole size in the jack housing and the fitting size within it and then look for a socket you can use with your cordless drill...
view full answer...
- How To Operate the Lippert Components Spare Tire Winch with Offset CableIn order to operate the Lippert Components Spare Tire Winch with Offset Cable part # LC159056 you'll need both the Crank Extension for Lippert Components Spare Tire Winch Assemblies part # LC1315411 and the Crank Handle for Lippert Components part # LC285324. The extension rod can be cut to fit your exact needs.
view full answer... - Recommended Spare Tire Winch For Gooseneck TrailerFor a spare tire winch for your trailer I recommend the Lippert Components Spare Tire Winch with Offset Cable # LC159056 which will mount to the frame of the trailer. You will also need the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies # LC1315411 which will be permanently mounted to the winch. If you need to shorten the extension you can cut the side with the hole and re-drill the hole after you have the extension cut to the proper length. Using the Replacement...
view full answer... - Crank Extension and Crank for Lippert RV Spare Tire Carrier with WinchThe Lippert Components RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041 will use the Replacement Crank Handle for Lippert Components Manual Scissor Jack # LC285324. The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies - 35-1/2" # LC1315411. The extension is to remain attached you can use a pin or even weld it in place. The 71 inch extension will require a mount to hold the extension in place at the frame to support the opposite end of the extension....
view full answer... - Replacement Winch For 71" Lippert Spare Tire Carrier # LC159041You will need the Replacement Winch and Crank Extension # LC74HD to replace the damaged tire holder on your Lippert RV Spare Tire Carrier with Winch # LC159041. This should also resolve your issue with the tire cable lowering from the winch. It is possible that part of the brake inside the winch was damaged which allowed your winch cable to drop and contact the ground while traveling. It is very important to only use a Manual Crank Handle # LC285324 with the tire carrier as if you use...
view full answer... - Single Replacement Stabilizer Scissor Jack for 2020 Imagine 2670MK TrailerI can help you determine which single stabilizer jack is the best option for your 2020 Imagine 2670MK, though there isn't a list or any type of database, for example, that has specific replacement parts for trailers. That said, all you really need to know is the amount of travel you need as scissor jacks are universal fits. The best option is likely the 24 inches of lift of the Lippert Scissor Stabilizer Jack # LC285325, which has a 5,000 lb capacity. It also uses a handle (part # LC285324)...
view full answer... - Can the Lippert Electric Trailer Jack # LC285318 be Operated ManuallyMost electric jacks have manual overrides on them just in case there is an emergency and there is a power loss. If you have the Lippert Electric Trailer Jack # LC285318 that you referenced then the manual operation can be accessed at the top after the plug is removed (see attached picture). This jack comes with an emergency crank handle but if you misplaced yours you can get a replacement using part # LC285324 on our site which has a 3/4" socket.
view full answer...
- Replacement Manual Crank Recommendation for Lippert Powered A-Frame JacketFor a replacement manual wrench for your powered Lippert jack part # LC285318 you would want the part # LC285324. Or if you need to operate the manual crank right now grab a 3/4 inch socket, extension, and ratchet and you'll be able to turn it manually with that as well.
view full answer... - How To Manual Raise And Lower RV Jacks When They Fail Most electric tongue jacks, like the Lippert Electric Trailer Jack with Footplate # LC285318 you were looking at, have a manual override in the top of the head. Simply remove the rubber gasket and use a crank like # LC285324 to manually operate your jack. If you have a fifth wheel landing gear you're trying to raise or lower then you would need to use a landing gear crank like # RVLG-HDL or # LC119226 and can find the manual override on the driver's side where the motor is located.
view full answer...
- Replacement Crank Recommendation Lippert Electric Trailer Stabilizer JacksYour electric stabilizer jacks should take a 3/4 inch hex socket if you need to manually override them. Or you can use the part # LC285324. For a motor most likely you would need the part # # LC138445 to fix yours that stopped working.
view full answer... - Is There A Manual Crank Available For A Lippert Tongue Jack?To raise your Lippert jack manually, you will need the Lippert Replacement Crank Handle # LC285324. This is designed to be used with standard Lippert Components manual scissor jacks as well as Lippert power tongue jacks in the event of a power failure.
view full answer... - What Crank Handle Goes With The Lippert Winch Extension LC1345411?You can use the Replacement Crank Handle # LC285324 with the Lippert Winch Extension # LC1345411. Keep in mind that you will also need a cotter pin such as part # 165649 to hold the extension in place, if you don't already have one.
view full answer... - Socket Size for the Lippert Components Electric Stabilizer Jack Manual Crank Handle # LC285324 I went out to our warehouse to grab a Lippert Components Electric Stabilizer Jack Manual Crank Handle # LC285324 and found that the socket size 3/4 inch with an outer diameter of 1 inch. If you take a 3/4 inch wrench or socket out to your current stabilizer jack and it's the right size for it this handle will work as a replacement.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Ryan G
Written by:
Chelsea B
Updated by:
Kristen H
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.