Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2"
(53 reviews)
Price: $48.27
In Stock
Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2"
Item # LC1315411
Our Price: $48.27
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (53)
- Q & A (0)
- Videos (2)
- Photos
Lippert Accessories and Parts - LC1315411
- RV Cargo Carrier
- Spare Tire Winch Parts
- Crank Extension
- Lippert
Replaces the crank extension for your Lippert Components spare tire winch assembly (164898, 178746, and 233739).
Features:
- Replaces the crank extension for your Lippert Components spare tire winch assembly (164898, 178746, and 233739)
- Compatible with both the offset and center winches
- Fits over the winch turn rod and can be pinned (sold separately) or welded
- Overall length: 35-1/2"
202305407715 Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies - 35-1/2"
Replaces 1315411
Video of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Spare Tire Winch Assemblies Crank Extension Replacement Review
Hey everybody, Ryan here at etrailer. Today, we're gonna be checking out the Lippert crank handle, which will connect to the Lippert spare tire winch. First and foremost, this is gonna be used for a couple of different reasons, at least that I can think of. One of 'em being a replacement. Let's say, if your camper or trailer or whatever you got was already equipped with a Lippert spare tire winch and for whatever reason, this got damaged, it's direct replacement. I don't really see that happening because I mean, I don't really understand how this could get damaged but I mean, crazy things do happen.
So, if that's what you're looking for, that's your situation, you're covered with it. But, I feel like this'll be more so used when you add a Lippert spare tire winch. And that's exactly what we did today underneath a bar motor home, we did away with the old one. It was just a wing nut and bolt and kind of a big pain to use and everything else. So, we upgraded to this and whenever you get this, it does not come with the rod to allow you to turn it to actually operate the spare tire winch.
So, this is gonna slide right on the end of it. And there's gonna be a hole in it that lines up with the shaft coming out of your winch, and that's how you're gonna connect the two. So, I used a cotter pin to pair the two together. Kind of a bummer. It doesn't come with the cotter pin, so I feel like that's what most people are gonna do.
I feel like it'd be a nice touch, you know, 'cause even if you we're replacing it, you'd probably want to put a new cotter pin in, right So, if you need one, you can always grab it here in etrailer. We got a bunch of 'em. You can also weld it. If you wanted to put a tack weld on there. You know, it don't really matter.
I'd probably use the pen still that way if you did ever have to change it out, you could easily take it apart. But with that said, this is gonna run in our case, to the back of our motor home, where we can get our tool on it to actually able allow us to turn this and work our winch. The overall length of this is going to be 35 and a half inches. That doesn't mean you can't cut it down low. Say if only you needed was like a foot, you could cut it and then obviously redrill a small hole there to line up with the hole on your wind shaft to put the cotter pin in. So, it is somewhat customizable. I do wanna mention it's not gonna come with any supports or anything. This is something that I made just to brag with the hole to keep this supported since it is so long. Just throwing that out there. But at the very end of it, we're going to have a hexagon shape and that's going to be three quarters in size. So, a three quarter inch socket six point socket will fit right over this and you can operate it and use a four way or your socket and breaker bar or whatever to turn this. Or you can always pick up the tool that's designed to fit over this and operate your spare tire winch. So, this is that tool I was talking about. Has that three quarter inch socket essentially just welded onto it. And that's gonna allow you to put that through onto our P air and rotate this and either raise or lower our tire there. Other than that, though, you know, at the end of the day, this is like I said before a replacement part or honestly almost a must have for those of you that plan on adding the Lippert spare tire winch. And that'll finish up our look at of the Lippert crank handle for the Lippert spare tire winch..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- etrailer mistake
Customer Reviews
Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" - LC1315411
Average Customer Rating: 4.4 out of 5 stars (53 Customer Reviews)
Replaces the crank extension for your Lippert Components spare tire winch assembly (164898, 178746, and 233739).by: Phillip05/06/2024
It works but it is not stable until it is pinned to the frame. I checked with etrailer and Lippert and this is the only size they make. I will make a plate to keep it more stable but they really should offer different sizes for all the various wheels out there.
by: Jerry08/03/2020
It's exactly what I was missing from my trailer at delivery 3 yrs ago. Up until now I wasn't able to lower (easily) the spare tire. This is an absolute must for me. Thank you etrailer for your speedy delivery of my extention.
by: Dell 03/01/2024
Fast shipping Great service as usual.
by: Deb 05/15/2023
This extension bar worked PERFECTLY for our needs!!! Thank you so much for the genius minds that do the work! Thank you again!
by: Frank 04/26/2021
Worked great for my application. Had to cut it to size. Instead of using a cotter pin to secure it, I drilled a hole a little bit bigger and used a stainless steel screw, 2 washers and a lock nut. Been on many over 15 trips, and it's still secure. Would recommend checking on it every trip destination and back home to make sure your spare is still secure.
Frank
4/27/2022
The crank shaft is still secure. I would recommend using a stainless screw, 2 washers and a lock nut to secure it to your tire winch. Also, I would recommend checking your spare is secure before every trip and trip back home. Works perfectly for me. Most likely you will have to modify shorten the shift and drill a new hole to fit your application. Nothing is perfect in this world. Product works perfect. The ones who take stars off the product will never be happy. This is 100 star product if you need a shift for your spare.
by: Frederick11/16/2022
I purchased my KZ Sportster 3 1/2 years ago new and never had to use the spare. I recently decided to drop the spare and inspect it when to my surprise I discovered that the extension rod was not installed. The dealer told me it must have come that way and KZ told me the dealer must have removed it. etrailer delivered it to me two days after ordering it and 5 minutes later I had it installed. At least etrailer is concerned about customer satisfaction and I appreciate the quick response and quality product.
by: Anonymous 04/05/2023
Quik reliable service
by: Louie02/08/2019
I inadvertently ordered this product twice John H. at etrailer not only emailed me but also called me unfortunately I didnt catch it untill after you were closed. I did email him back and he was able to send me RMA
I would recommend etrailer to all my friends and family
Thanks for the GREAT customer service
by: Bill01/19/2020
Finally finished the project e trailers made it easy . Started with a bare frame and put on new axle springs tires and bunks, rollers and winch.
Can’t want to hit the water
by: Steve05/09/2022
Easy to install, and makes access to the spare tire much more convenient. Fortunately, I haven't had to use it other than testing it after installation.
by: George 11/01/2019
a little pricey & to much packaging (raises cost). Small cardboard tube would have worked fine. Same as what fishing rods come in. Other that what I mentioned, etrailer goes way beyond on customer service, which is great for the consumer.
by: G Richard01/30/2020
Product exactly as needed for replacement of broken Lippert Tire Winch. Webpage should include info on Crank Extension (LC1315411) that is required for correct installation and operation.
by: Robert 04/18/2023
Fast shipping great service
by: Ross11/09/2018
Not heavy duty and lacked a cottor pin to attach to the winch.
But I'll do .
Great price service from etrailer as usual.
by: Anthony07/11/2021
I had to shorten it 2” and re-drill the hole. The unit should also come with the pin to finish the installation
by: Walter 10/20/2022
The order was quickly done and sent and received in good shape thank you for the work
by: Lester10/07/2019
Fast delivery, quality parts, great customer service
Lester
10/8/2020
Great
by: Josh12/05/2022
Josh
12/6/2023
After one year our spare tire is still hanging under our RV as advertised and thank God, we havent needed it. At least a dozen trips since installation and tire is securely in place.
Mike L.
12/6/2023
@Josh Great to hear that!
by: Douglas05/22/2020
Perfect replacement
by: Rodney05/20/2021
I've had this item for well over a year. The hardest test I put it through was nearly 10 degrees F. It performed flawlessly. I'm glad we bought it.
by: Jon04/10/2020
Order processing was a bit slow due to the extraordinary times we are living in right now, but the customer service and delivery were as great as always. I had all my questions answered before placing the order and the order arrived in a timely manner.
by: Christopher04/17/2024
by: Craig 09/06/2023
by: Carl 10/22/2021
As described
by: Patrick 10/23/2019
Looks great but haven't use it yet
25
53
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Mounting Hole Dimensions of the Lippert Spare Tire Winch # LC159056If you check out the diagram I attached of the side of the Lippert Components Spare Tire Winch # LC159056 that mounts you can see that the distance between the mounting hole locations is 5-1/4" on center. I reached out to my contact at Lippert who said that the handle # LC1315411 is 35-1/2" long and would work with this winch.
view full answer...
- Recommended Spare Tire Winch To Replace Damaged One On 2004 Fleetwood Toy HaulerEven though the crank pin on the spare tire carrier on your 2004 Fleetwood Toy Hauler comes out at a different place than the the Lippert Components Spare Tire Winch with Offset Cable # LC159056 you were looking at, you will still be able to use the # LC159056. The # LC159056 will bolt to the frame of the trailer and you may need the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" # LC1315411 to allow you the extra length to be able to use the Crank Handle...
view full answer... - Installing Lippert Spare Tire Winch with CableThere aren't any instructions for just the Lippert Components Spare Tire Winch with Offset Cable # LC159056 at all, but you will need to find a way to bolt it onto the underside of your RV frame; the mounting holes are 5-1/4" apart on center and I have added a photo from a customer which shows how they did it on their trailer. There are instructions for the RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041, which I have linked for you that will require you bolt to your chassis....
view full answer...
- Spare Tire Carrier Which Can Be Mounted Underneath Truck BedYou will need to use the Lippert Spare Tire Winch # LC159056 with the Crank Extension # LC1315411 to mount a spare tire under your truck bed. The Erickson Spare Trailer Tire Bracket # EM77316 you found is not designed to support the weight of the whole tire. For this bracket the weight of the wheel and tire must be supported.
view full answer... - Underbody Spare Tire Options for 5th Wheel TrailerWe have a few different spare tire carrier options for a trailer but you might have to get creative since you have the covered underbelly. The simplest option we have is the Lippert Spare Tire Winch # LC159056 which you mount to your trailer frame and then you also need the Handle # LC285324, Extension # LC1315411, and Cotter Pin # 165649 for everything to work properly. The next option up is the Lippert RV Spare Tire Carrier with Winch # LC159041 which comes with braces that mount to...
view full answer... - Recommended Undercarriage Spare Tire Mount for 5th Wheel RV If I understand correctly, you are wanting a frame mounted spare tire carrier that mounts under your 5th wheel RV. We have a few options available, my preferred being the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier, # LC125460. This has overall dimensions of 99-1/2" long x 19-1/8" wide x 8-1/4" tall with a built-in winch in the center of the unit to raise and lower your spare tire. But in addition, it has a 27-7/8" long x 17" wide x 8" tall, slide-out bins with...
view full answer... - How to Secure the Extension Rod to the Lippert Components Spare Tire WinchThe Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies part # LC1315411 that is used with the Lippert Components Spare Tire Winch with Offset Cable part # LC159056. Is designed to be either pinned in place using a roll pin, can be bolted with a small 1/8" bolt or for maximum strength be welded directly to the winch. In your case if you have gone through several cotter pins I don't see a roll pin holding up either. You will want to either use the bolt to get more...
view full answer... - Size of Crank Fitting on Lippert Components Spare Tire Winch LC159056Lippert Components Spare Tire Winch # LC159056 has a 1/2-inch round crank fitting and uses Replacement Crank Extension # LC1315411. One end of this part has a 3/4-inch hex shape to mate with a crank handle. If you have a crank handle with a 3/4-inch hex fitting it should work fine.
view full answer...
- Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch AssembliesThe Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies # LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable # LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75 inch diameter, as you can see in the accompanying photos. I've added links to a video review of the crank extension and spare tire assembly for you to check out.
view full answer...
- Shaft Diameter of the Lippert Components Spare Tire Winch with Offset Cable # LC159056The shaft diameter of the Lippert Components Spare Tire Winch with Offset Cable # LC159056 is 1/2 inch. It's designed to be used with the intermediate shaft # LC1315411.
view full answer... - How Does the Handle Work on the Lippert Components Spare Tire Winch 159056There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part # LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part # LC1315411. This will be installed directly on the winch and permanently mounted on the trailer. Basically, the end with the hole drilled in it will line up with the hole on the end of the output shaft on the winch and then secured with a cotter pin. If you need the...
view full answer...
- Recommended Spare Tire Winch For Gooseneck TrailerFor a spare tire winch for your trailer I recommend the Lippert Components Spare Tire Winch with Offset Cable # LC159056 which will mount to the frame of the trailer. You will also need the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies # LC1315411 which will be permanently mounted to the winch. If you need to shorten the extension you can cut the side with the hole and re-drill the hole after you have the extension cut to the proper length. Using the Replacement...
view full answer... - Lippert Crank Handle for Lippert Spare Tire Winch AssemblyThe crank handle for the Lippert Components Spare Tire Winch with Offset Cable item # LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item # LC1315411. The Spare Tire Winch item # LC159056 has a 1/2-inch round crank fitting and the Replacement Crank Extension item # LC1315411 has a 3/4-inch hex shape on the other end. I have attached a picture and a review video so you can get a better look at the Crank Extension.
view full answer... - What Crank Handle Goes With The Lippert Winch Extension LC1345411?You can use the Replacement Crank Handle # LC285324 with the Lippert Winch Extension # LC1345411. Keep in mind that you will also need a cotter pin such as part # 165649 to hold the extension in place, if you don't already have one.
view full answer... - How To Operate the Lippert Components Spare Tire Winch with Offset CableIn order to operate the Lippert Components Spare Tire Winch with Offset Cable part # LC159056 you'll need both the Crank Extension for Lippert Components Spare Tire Winch Assemblies part # LC1315411 and the Crank Handle for Lippert Components part # LC285324. The extension rod can be cut to fit your exact needs.
view full answer... - Recommended Crank Extension Handle for Keystone Montana Spare Tire WinchIn order to find the correct extension wrench for your spare tire carrier you'll need to know which exact one you have as we have no way to look this up for you. The only spare tire carriers we offer are from Lippert like the Replacement Winch and Crank Extension for Lippert RV Spare Tire Carrier part # LC74HD and in which case we do have an extension wrench option for this in the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies part # LC1315411.
view full answer... - Replacement Crank Handle For the Lippert Spare Tire Winch with Offset CableWe do have something like that. The Lippert Spare Tire Winch with Offset Cable # LC159056 use the Crank Extension for Lippert Spare Tire Winch Assemblies # LC1315411 which attaches to the winch. You would then use the Replacement Crank Handle for Lippert Manual Scissor Jack # LC285324 to raise and lower the spare tire.
view full answer... - Crank Extension and Crank for Lippert RV Spare Tire Carrier with WinchThe Lippert Components RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041 will use the Replacement Crank Handle for Lippert Components Manual Scissor Jack # LC285324. The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies - 35-1/2" # LC1315411. The extension is to remain attached you can use a pin or even weld it in place. The 71 inch extension will require a mount to hold the extension in place at the frame to support the opposite end of the extension....
view full answer... - Spare Tire Hoist for MotorhomeThe Lippert Components Spare Tire Winch # LC159056 that you referenced is currently the only item of its type that we offer. For use with this we offer an extension # LC1315411 that works with a crank handle. We do have other types of spare tire carrier like hitch mount # C31006 and bumper mount # TR-1 but I realize neither of these replaces the convenience of being able to stow your spare under the coach.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Ryan G
Video Edited:
Joshua S
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerry G.
8/4/2021
Its been the best buy for my trailer as I had no way to get my tire to lower.