bing tracking image
  1. Weight Distribution Hitch
  2. CURT
  3. 500 lbs
  4. Fits 2 Inch Hitch
  5. WD Only
  6. Includes Shank
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW

Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW

Item # C17050
Retail:$501.95
Our Price: $332.64
You Save: $169.31
Weight Distribution Hitch
Shipping Weight: 81 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately. Great Prices for the best weight distribution hitch from CURT. Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW part number C17050 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (754)
  • Q & A (0)
  • Photos

CURT Weight Distribution Hitch - C17050

  • 500 lbs
  • Fits 2 Inch Hitch
  • WD Only
  • CURT
  • Includes Shank
  • Electric Brake Compatible
  • Surge Brake Compatible
  • No Sway

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Round spring bars are constructed of solid, forged steel for strength and durability
  • Adjustable spring bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Grease zerks in the head assembly make for simple maintenance
  • Powder coated steel resists corrosion
  • Snap-up lever eases hookup by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Tongue weight: 500 lbs - 600 lbs
  • Maximum gross towing weight: 6,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Lift bracket positioning: 31-3/16" back from center of coupler
  • Shank length: 12"
  • Maximum rise: 6"
  • Maximum drop: 2-1/2"
  • 1-Year limited warranty


Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Lift Bar
  • Hitch Pin and Clip
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Forged Steel Spring Bars

The round spring bars are made from forged steel, giving them a distinct advantage over typical cast steel bars. Forging is a process where thermal and mechanical energy are applied to the steel, resulting in a finished product that is more resilient to impacts and is stronger in terms of shear strength. Simply put, these spring bars do a superior job of helping to hold your trailer in line because of their added strength and durability.


Built-In Grease Zerks

Built-in grease zerk on the Curt weight distribution system head assembly

The system's head features 2 built-in grease zerks so that you can easily lubricate the spring bars without having to remove them from the head assembly. The grease zerks are located on each of the shafts that encase the spring bars. Simply use a grease gun (sold separately) to inject grease into each of the zerks.



17050 Curt MV Round Bar Weight Distribution Hitch

Installation Details C17050 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW - C17050

Average Customer Rating:  4.6 out of 5 stars   (754 Customer Reviews)

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.

by:

Best weight distribution system I have ever used. Very strong and made towing a pleasure.



by:

Amy the Etrailer rep was outstanding & very helpful!

Donald

4/8/2024

Works as advertised, no problems. Good product.



by:

I'm giving this hitch a 5 star based not only on the hitch but my overall experiences with Etrailer. I have owned this hitch for a year.There are better weight distribution hitches out there, but I must say it's a great hitch for the money. It was fairly easy to install on my own and the set up is straight forward. I did not get the sway control, but you can easily add it to this hitch. Engaging the bars can be difficult if you're not on perfectly level ground.



by:

Product itself seems very stoutly built. It can't be easily installed if your trailer jack wheel is on the side of the a-frame, like mine is. The offset bracket kit doesn't help at all in this case. I had to move my jack wheel farther aft to make it work.

The packaging is just way to flimsy for the 81 lb. weight. It came crushed with holes and stuff hanging out. I've seen several other reviews with this same complaint. Fortunately, nothing was lost.

Lynn A.

7/27/2023

Still working well. My complaints were all about shipping and installation issues see original review.



by:

I have been a shadtree machanic all my life, and I recognize quality when I see it. This well made Curt is the confidence builder I needed to feel safe towing heavy loads with a Toyota Tacoma.



by:

I received this item today. It is incomplete!!
The
inside box had to be torn to shit before the out side box was put around it,. REALLY! Someone should have at least checked to make sure all of the parts and readable instructions were present.
At this point my review rationg would be .5. Just glad I wasnt ready to go on a trip.
All items on parts list 7 thru 19 are mising.

Etrailer Expert

Sierra K.

6/30/2022

I am sorry. I know that was irritating. We recently shipped you new hardware and were wondering if you had any comments about the installation of the product?



by:

Arrived early, my wife and I installed this ourselves with basic tools. Instructions were clear and easily followed. Loaded my trailer just like I would for travel. Went from squatting to nice and level.
I purchased longer chains for the bars due to the Somerset having a stacked frame.
I also purchased a transmission cooler. Installed that with no problems



by:

This hitch system has been great for our camper and 2018 Kia Sorento. The only complaint I have is that the finish coat started to peel and have issues in some spots pretty quickly. It did not take much for there to be a ding or nick that caused issues which then produces some rust.

As far as utility though, the hitch works great and meets the need of what I am looking for.



by:

This is my second Curt system and the quality isn’t as good as the first. The loading bar for the snap up bracket is a rough cut, short piece of pipe, without a handle grip. The hinges on the snap bar bind and do not move freely by hand. The chain links were smaller making it hard to keep them on the hook when loading the spring. I took the chains from my old system and put them on the new system. The paint finish is not as durable as the old system. The holes for the safety pins are not exactly aligned. The system works but I was hoping for better quality.



by:

Put this on our 2006 Nissan Frontier to pull our camper. Worked great, and really helped raise the trailer tongue.



by:

Iam sure the hitch will work well if all the parts are there. This is how I received my hitch off the delivery truck. Not good.

Etrailer Expert

Katrina B.

5/16/2022

Oh no! I have sent your information over to our customer service department for them to assist you.



by:

Works well on my f 150 and wolf pup tra iler



by:

The hitch was easy to install and setup properly with the instructions provided. My pickup and the trailer ride level and I’m guaranteed to not drag the tongue jack again.

Mac

5/31/2020

Still great, I’ve used it with my old Dodge Dakota and my newer Toyota Tacoma. I had to make a simple adjustment when I first started towing with the Tacoma but it is all good after the slight adjustment.



by:

Good fit and finish of the weight distribution system. Assembled and installed easily in 1 to 2 hours. Seems to be the perfect fit for my trailer and tow vehicle. Way better value than the $900 system that the RV dealer tried to insist that I needed.

Jerome

6/11/2019

still working great. no issues.



by:

I had the system installed by my trailer personnel--no problems. Fit was perfect and it works great. Highly recommend it.

Thomas

8/12/2022

I sold the trailer and the system.



by:

This order is in limbo for 11 days. I wish to cancel the order. Tracking indicates "delay." I can't wait any longer. Please refund my money. Please check this out!

Etrailer Expert

Jenny N.

6/2/2022

I will have our Customer Service team reach out to you.



by:

Would have been five stars, except one of the grease fittings was broken.



by:

This hitch seems very well made and is not difficult to assemble. I’m overall happy with this product except for the chains on the bars isn’t long enough to hook up while using this with a pole tongue adapter.

Etrailer Expert

Mike L.

5/11/2018

The Pole tongue adapter you purchased is designed for trailer frames up to 6 inches tall. If the chains arent long enough, lower the weight distribution head by 1-2 sets of holes and tilt the head more toward the front of the vehicle. This will bring the ends of the spring bars higher, and should allow your existing chains to work.



by:

Curt products are well made.



by:

Exactly what i needed good instructions. Package was destroyed and the little bag holdins the hardware had busted open , and the shipper did get everything back in the box before tapping everything up. etrailer was right on it and got the missing parts to me asap thank you for that



by:

This hitch system helped us haul our popup 4k highway miles with no stability issues and great load levelling on our Honda minivan. Setup is relatively easy, however it did require some modifications to the trailer tongue. Overall I recommend this device.



by:

So far I have installed the Weight Distribution Hitch, very easy to install it (saved me 200 $), easier if you have a helper, took me about an hour (with a helper) to put it together, instructions very easy to follow.
Solid construction, you will need tools that usually are not in every house (1" wrench)



by:

A big improvement in towing performance for my small truck and small travel trailer. Even without a sway control device, the sway is drastically reduced. Great value for the price.



by:

I installed the hitch today, with the information provided on the etrailer website I was able to get the right one for my application first time around. It turned out just like I wanted. etrailer has name brand products at good prices. I'll be back.



by:

Equalizer bars work great with my Dodge Caravan and our Christian Builders tool trailer.


25
752
Show More Reviews

See what our Experts say about this CURT Weight Distribution Hitch

  • Weight Distribution Hitch For 2018 Chevrolet Colorado Towing 2021 Forest River R-Pod 190
    With the Curt MV Weight Distribution Hitch # C17050 you can back up with the hitch and do normal driving turning. I would recommend removing the tow bars if you are backing up to an angle that is greater than that can be achieved when driving forward during steering lock turns. This Curt hitch does not include any kind of sway control as it is only a weight distribution bar. If you were to add a Sway Control # 17200 that would have to be removed before any backing up. And I generally...
    view full answer...
  • Recommended Weight Distribution for 3700 lb Fleetwood Niagara Pop-Up Camper
    With a weight distribution system, you want to choose a system based on the fully loaded and ready to tow tongue weight of the trailer. I'll link you to a help article that explains how to determine your fully loaded tongue weight, but since you've provided the GVWR (thanks for that, by the way!) we can make a pretty darn accurate educated guess. With a GVWR of 3700 lbs, the tongue weight of your pop-up will range from 370 lbs on the low side to as much as 550 lbs. Both the Curt # C17057...
    view full answer...
  • Bolt Size of Replacement Bolt Kit for Curt MV Weight Distribution Systems
    Sure thing - the Replacement Bolt Kit for Curt MV Weight Distribution Systems # C17076 uses 3/4" - 10 x 4 1/2" long hex bolts. According to the linked instructions, they will be tightened to 200 ft lbs. This replacement bolt kit is used to attach the head to the shank. Here are the systems that the Replacement Bolt Kit # C17076 works with: - Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 - Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW,...
    view full answer...
  • Can 2013 Ford Edge With Factory Trailer Hitch Use Weight Distribution Hitch C17050
    Your Ford dealer was right, as Ford says nothing specific about weight distribution compatibility with the factory hitch on a 2013 Ford Edge. That said, I took a look at Ford's 2013 towing guide, and they list capacities for their hitches both with and without weight distribution, and the Edge's capacity for WITH weight distribution was blank, and the only reason I can think why that would be is if it isn't compatible with weight distribution. So while I can't say with absolute, 100 percent,...
    view full answer...
  • Husky Spring Bars Compatibility with Trailer Hitch Weight of 476 lbs
    The Replacement Spring Bar for Husky Towing Round Bar Weight Distribution Hitches - Qty 1 # HT31521 are designed for trailers with a total tongue weight (loaded trailer tongue weight along with any cargo behind the rear axle of your tow vehicle) between 801 and 1200 lbs. These bars will be far too strong for your trailer and could cause a rough ride and even some wheel bounce. I definitely do not recommend them for your trailer. My recommendation is to use a system more suited for your...
    view full answer...
  • Weight Distribution Hitch For A 2016 R-pod 179 With 300 Lb Tongue Weight And 3800 Lb Trailer Weight
    I can understand where weight capacities and limits can be confusing. Your 2016 R-pod 179 dry weight is 2649 lbs with a payload of 1136 lbs. Total you are looking at 3785 lbs with a tongue weight just under 300 lbs. It is true that you do not want your weight distribution set up to extremely exceed the weight capacity of the trailer weight however, I always recommend exceeding it by at least 100 lbs just to cover yourself. I recommend the Fastway e2 Weight Distribution Item # FA92-00-0450....
    view full answer...
  • Recommended Curt MV Weight Distribution System for Trailer with 425 Pound Tongue Weight
    If the loaded tongue weight of your Starcraft Avalon is around 425 pounds I recommend the Curt MV Weight Distribution System # C17050, which features a tongue weight capacity of 500 to 600 pounds. When adding any cargo weight you have stored behind the rear axle of your Silverado this will match up really nicely to your setup's total tongue weight and will work great to level out both your truck and the trailer. The only thing you will need to add is a compatible hitch ball like the 2...
    view full answer...
  • Curt Weight Distribution System Recommendation for 2005 Chevy Colorado Towing Enclosed Trailer
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The Curt part # C17057 that you referenced...
    view full answer...
  • Shank Dimensions for Curt MV Weight Distribution System C17050
    The Curt MV Weight Distribution System part # C17050 has a shank which is 12" long overall or 8" from the center of the hitch pin hole to the center of the adjustment hole. In regards to the gusset, this is about 2-3/4" forward from the center of the adjustment hole. Don't forget the 2" Hitch Ball part # 40038 as well.
    view full answer...
  • Weight Distribution Hitch For A 2011 Ford Escape Towing A 16 Foot Travel Trailer
    I would recommend putting a weight distribution hitch on just for the safety aspect. You will always get some type of sway when towing a trailer. When picking the correct one you will need to be as close as possible to the loaded tongue weight of your trailer. The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37060ET has a tongue weight between 200 pounds to 600 pounds. So it will work perfect with your trailer. The hitch has a dipped steel construction which is durable...
    view full answer...
  • Does Curt MV Weight Distribution System C17050 Work Over a Range of Trailer Tongue Weight
    Weight distribution systems like the Curt MV Weight Distribution System # C17050 are specified to work over a range of trailer tongue weights (TW). This system is rated for TW from 500 to 600-lbs. Ideally the total TW of the trailer/vehicle system will fall right near the middle of a WD system's operating range. This Curt system would then be ideal for a total TW of 550-575-lbs. The total TW of a trailer/vehicle system is the sum of the actual fully-loaded trailer's TW plus the weight...
    view full answer...
  • Does Chevy Trailblazer Have Higher Towing Capacity When Using Weight Distribution
    Yes, if you were to use a weight distribution system like the part # C17050 you'd get the higher tongue weight capacity you mentioned of 912 lbs instead of 400 lbs like you mentioned.
    view full answer...
  • Can You Reverse with the 6K Curt MV Weight Distribution System
    The Curt MV Weight Distribution System part # C17050 does not have sway control so reversing is not as big of an issue although the trailer still needs to remain relative straight. If you need to turn and backup it is recommend to unhook the spring bars.
    view full answer...
  • Weight Distribution with Sway Control for 2017 Spree Escape by KZ
    It looks like your 2017 Spree Escape by KZ has a maximum weight of 3,500 lbs. Going off of this information, I recommend the Blue Ox SwayPro Weight Distribution w/ Sway Control item # BXW0550. This weight distribution hitch works with trailers up to 6,000 lbs and won't be too over-rated at 550 lbs. This system uses optimal points of tension to help prevent sway while it balances your trailer's load for a more level ride. The lift chains will provide for a quieter ride than spring bar brackets....
    view full answer...
  • Best Weight Distribution System for a Keystone Springdale 179RD
    II took a look at the weight capacity for your Honda Ridgeline and the loaded weight of your Keystone Springdale 179RD trailer. The dry weight is your trailer empty with no cargo inside whatsoever. Your trailer will be heavier once you get it loaded up. The Curt MV Weight Distribution System item # C17050 has a tongue weight range of 500 lbs - 600 lbs and will work great for your trailer but you will be limited by your Honda's 5,000 lbs maximum towing capacity. If you choose to add sway...
    view full answer...
  • How to Determine if Curt MV Weight Distribution System C17050 is Correct
    In order to determine if the Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 is correct, you'll need to know the loaded tongue weight of your H&H trailer, which you can get with the etrailer Tongue Weight Scale # e99044. If it is between 500 lbs and 600 lbs (and your hitch is rated for that much tongue weight with weight distribution) then you can use the Curt # C17050. If your total tongue weight is different you would need a different option, and...
    view full answer...
  • Recommended Weight Distribution Hitch For Trailer W/ 440lbs TW, and Trailer W/550lbs TW
    I would be happy to help! First the Curt MV Weight Distribution Hitch # C17050 you were looking at would be a bit stiff with the 440lb tongue weight you mentioned for your 16' Airstream, but is that figure what Airstream lists as the tongue weight, or what you measured? I would use a tongue weight scale to measure the tongue weight of both of your trailers when they are fully loaded if you have not already, as the tongue weight figures manufacturers provide are typically the unloaded...
    view full answer...
    Image 1 for
  • Alternate Shank for Weight Distribution System to Keep Trailer Level
    The Curt weight distribution (WD) system # C17050 does include a shank which installs in your hitch receiver and suspends the system's head assembly. It is possible to select a WD system that does NOT include a shank, which allows you to choose one with the appropriate rise or drop to keep your hitched trailer level. Or you can simply choose a second shank from the linked page, such as Curt shank # C17124, which offers up to 10-inches of drop. The linked page displays all WD systems that...
    view full answer...
  • Can the Curt MV 600 LB Weight Distribution System Be Upgraded
    The springs bars are the only difference between the Curt MV Weight Distribution Systems part # C17050 and part # C17051 and these are available separately so you can purchase two of the Replacement Spring Bar part # C17072 and then be set when you are towing with your motorcycle in the truck bed. The addition of airbags should not be needed. In regards to installation, the head attachment bolts used to be 1/2" but they are now 3/4" and that is what this is referring to so please disregard...
    view full answer...
    Image 1 for
  • Can I Use a Weight Distribution Hitch on a 2019 Honda Pilot
    Generally, switching to a weight distribution hitch with anti-sway built in is going to provide a much better towing experience; you're also going to find that these combined systems like the Fastway E2 # FA94-00-0600 will allow you to backup while they're attached. However, according to Honda, it's not recommended that you use a weight distribution hitch on the 2019 Pilot. The Honda Pilot is a uni-body frame and the added stress that a trailer is going to put on the rear axle of a vehicle...
    view full answer...
    Image 1 for
  • Can Curt MV Weight Distribution Brackets Fit 29" Back From Trailer Coupler
    Hey Eric, thanks for reaching out! The brackets for the Curt MV Weight Distribution System # C17050 won't fit your application unless you swap them out for the Chain Hangers # C17005 that you'll bolt onto the side of your frame. I took a look at all of the other options we carry and for your application I think this is going to be your best bet. The Curt MV isn't known for performance, but it's cost-effective and it works. In addition to those chain hangers you're going to need either...
    view full answer...
  • Replacing OEM Hitch On 2011 GMC Sierra 1500 - Class IV
    The factory hitch that came with your GMC Sierra 1500 was at least a Class III and possibly a class IV depending on what trim level you have. Looking at the available products as well as your specific application and towing needs, I recommend replacing your OEM hitch with the Curt Class IV Hitch # 14301 which has the 1000 lbs TW and 10000 lbs GTW you're looking for. I would caution you to give more consideration to a weight distribution hitch instead of a pure bumper pull, based upon your...
    view full answer...
  • Is the 6K Curt MV Weight Distribution System Too Much for a 3K Trailer
    The tongue weight of a 3,000 lb trailer is going to be between 300 lbs and 450 lbs. Therefore, the Curt MV Weight Distribution System part # C17050 which is rated for up to 600 lbs would be a bit overrated but it will still work for you. It's better to overrated than underrated when it comes to weight distribution systems and this also leaves you more room for error to upgrade down the road. Please note, in order to complete this system you will also need the 2" Hitch Ball part # A-90.
    view full answer...
  • Recommended Weight Distribution System for 2013 Forest River R-Pod 177
    A weight distribution system is a good idea anytime there is a noticeable drop on the rear suspension of your vehicle. It is also a good idea if you are experiencing any sway to help minimize that trailer wander with wind gusts and passing traffic. Your 245 lb dry tongue weight along with 36 gallon fresh water tank will double that weight. The Curt MV Weight Distribution System # C17050 you referenced will help with the distribution and reduce sag but will not help at all with sway....
    view full answer...


< Previous



Do you have a question about this Weight Distribution Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B
Employee Chelsea B
Written by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.