bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 4.3 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
Special Price on Select Furrion Camera Systems.

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

Item # FOS43TASF
Retail:$575.95
Our Price: $431.23
You Save: $144.72
RV Camera System
Shipping Weight: 1.73 lbs
Add to cart
In Stock
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV. Great Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen part number FOS43TASF can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (725)
  • Q & A (0)
  • Photos

Furrion RV Camera System - FOS43TASF

  • Backup Camera
  • Observation Camera
  • 4.3 Inch Display
  • Furrion
  • Wireless Signal
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • 1 Camera
  • Dashboard Mounting Bracket
  • Suction Cup Mount
  • Below Rear Clearance
  • 120 Degrees

The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.


Features:

  • Wireless backup camera system improves rear-view visibility for your RV or camper
    • Minimizes blind spots and helps prevent accidents
  • Included CMOS camera creates clear digital video in full color
    • 120-Degree viewing angle gives you optimum visibility
    • Integrated motion sensors trigger the monitor to turn on
  • Integrated IR cut filter blocks out infrared light during the day to capture natural-looking images
    • 8 Infrared LEDs surround the camera lens to provide nighttime vision up to 16'
  • 4.3" Full-color LCD touch screen monitor has color-coded, rear assist marker lines that show distance from other objects
    • Auto-dimming, anti-glare screen is easy to see in any lighting condition
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Auto-off setting powers down the monitor after 10, 20, or 30 seconds
  • Integrated microphone and speaker make it easy to get help backing up
    • Microphone on camera picks up your friend's voice outside the RV
    • Speakers on monitor let you clearly hear your friend's instructions
  • Built-in digital transmitter offers high-quality, uninterrupted video up to 492' away
    • Eliminates interference from smartphones, routers, and other devices
  • Durable metal housing is waterproof and dust resistant
    • IP65-rated to protect against dust and low-pressure water jet sprays
  • Simple installation - minimal drilling required
    • Monitor suction cups to your windshield
    • Camera mounts to the rear of your RV or camper
  • 1 Camera, monitor, 1 monitor mount, 12V DC power cord, 6' camera power cable, antennas, zip ties, and mounting screws are included


Specs:

  • Monitor dimensions: 4-3/4" wide x 3-1/8" tall x 1" deep
  • Screen size: 4-5/16"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing (center to center):
      • Horizontally: 3-3/4"
      • Vertically: 15/16"
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.


Monitor the Rear of Your RV

If you're set up at the campsite for the weekend, the motion sensor will automatically power the touchscreen monitor on if they sense movement in the form of a prowling animal or person.


Easily Communicate from Outside Your RV

Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.


Avoid Collisions While Backing Up

No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.


Furrion RV Backup Camera Infrared LEDs

And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' should you arrive at the campsite after dark and need to back up into your parking spot. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.


Withstand Multiple Climates and Environments

If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.


Installs Onto Your Windshield and RV Rear


Furrion RV Backup Camera Monitor Suction Cup

This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.


Furrion RV Camera Installation

Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with the included mounting screws and connect to your RV's reverse lights. Be sure that the camera won't interfere with any slide outs or other moving components. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.



729125 Furrion Vision S Wireless RV Backup Camera System for RVs - Night Vision - 4.3" Screen

Replaces FOS48TAPK-BL

Replaces 729125

Alt 405211ET

Alt 110423

Installation Details FOS43TASF Installation instructions



Customer Satisfaction Score:


Customer Reviews

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen - FOS43TASF

Average Customer Rating:  4.7 out of 5 stars   (724 Customer Reviews)

The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.

by:

I want to love this, but frankly I have consistent video dropout and lag issues towing a 26-foot GD Imagine trailer in various weather conditions. I tried fully disconnecting and resetting, repositioning antennas, and praying to the antenna gods, but it's only good for about two-thirds of the time. I think "YES, finally!" and then it starts dropping out again, making me insane. Also, as far as I can tell, there is no real good antenna upgrade for this. I suspect if you have a shorter trailer, or some fancy way to beef up the signal you'll do better.

Etrailer Expert

Jenny N.

4/15/2024

We have found that you can use part # WVOSAPANTEXT to help boost the antenna signal. Also making sure that the antenna is as high as possible will help.



by:

This camera has been great. I can keep an eye on our bikes that are on the back of our camper. I like that I can see how close drivers are behind me and I can see when I've cleared a vehicle that I just passed.

Brian

4/8/2024

Still working great. Does exactly what I was hoping it would do.



by:

Camera works as advertised. Wired camera into running lights 5th wheel. Took about 45 min to layout, drill, pull wire, caulk, and mount.
I did install 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord on both camera and receiver.
Receiver took about 20 min to install. I routed wires nicely, add choke rings.
I have 4 bars running 60 mph. Great purchase and very pleased.

Randy S.

10/13/2018

Camera and receivers still working great. Only issue is antenna broke on camera. Purchased aftermarket router antenna 18”. Still have 4 bars.



by:

We received our Furrion Observation Camera, FOS43TASF, quickly as advertised. Our camera arrived with no damage. Installation was fast and easy on our 2018, Grand Design, Imagine, 2600RB, plug and play with the existing mount. It took maybe 20 - 30 minutes at the most to install, pair and make minor adjustments. The camera and viewer paired immediately when power was turned on. The camera turned on when the trailer parking lights were turned on. Positioned the camera so the spare tire could be seen on the observation screen to give a point of reference to the back of the camper. Received a strong signal on the pairing. We haven't driven the camper on the road yet to give a review on the workings of the the unit but, don't expect any problems. Should be a good safety feature to know what is behind us when towing. Very happy with our purchase and would recommend this product. This product from etrailer was the least expensive price I could find while researching price points. Thank you etrailer.



by:

Good system. Only issue is my 2022 Silverado 2500, needed an additional power plug to use. When purchased through etrailer I always receive an error about my trailer light. No issues with lights. Additional REQUIRED power adapter has an issue.



by:

We purchased the Furrion FOS43TASF to use as an observation camera while towing our new 2018 26' Jayco Jay Flight travel trailer. Our Jayco came equipped with a pre-wired mount for the Furrion camera. The pre-wired black female cord for the camera was present but someone at the factory forgot to wire it to power, so when I plugged in the camera, there was no juice... I removed the center clearance light on the back of the trailer, used the supplied power cord and to feed in/splice in from the clearance light. Installation only took about 15 minutes. We already made our first trip this season and the camera worked wonderful. Great picture, no delays, very happy being able to see what's in the back and coming along the sides. We didn't use the monitor mount supplied with the Furrion, instead we used a vent phone mount I had for my phone that worked perfectly. This is our second and the best observation camera for towing a trailer we've experienced. The first one was another brand on different travel trailer we just sold. Our experience with that camera was poor picture quality, delays and blackouts. We definitely would recommend the Furrion FOS43TASF.



by:

Installation took 10 minutes, literally. already paired and my trailer had the mount installed. turn on parking lights and everything worked. Aiming camera took one minute. Now I can see who is behind me while driving.
Backing into a campsite just got way easier as well.



by:

This rear observation system was exactly what I needed to give me some eyes in the back of my towable trailer. The system communicates with a 4 bars of strength using a wireless signal between the camera, located at the back of my 24 foot long (2401RG Minnie Winnebago) trailer, and the monitor mounted in the cab of my Ford F150 XLT.
The installation was easy and only took about an hour at most.
I located the two wires feeding the center clearance light near the top of the trailer and through a new drilled hole just below the light I was able to feed in/splice in, the camera wires to get the power the camera needed. (Tip. Before this I used a pair of 6V batteries in series to get temporary power to the camera to ensure good signal back to the monitor in the truck and that a good rear view was possible from the intended mounting spot). Now I can see from the trailer's back bumper to about 35 feet behind on the road.
As usual the Etrailer team was helpful and the order arrived quickly and correctly.
Great Job Julie H. for the last minute assist to correct my order.



by:

It's a good product. The camera lights are non-glare light blue, but they really show everything very well in the dark. Our trailer is 23ft. and the signal gets to the truck dash board from the back of the trailer quite well.



by:

I needed a way to see my Indian motorcycle on a trailer behind my 40’ fifth wheel. I had Fords system when I bought my new truck, but there was much more wiring than I wanted to tackle and I was hoping for a non wired system. I bought this with my fingers crossed. Very easy installation of less than an hour and the results were what I wanted



by:

Super easy install if your unit is already equipped with the mounting bracket from the factory. The only thing I was not impressed with was the monitor mount. Quite restrictive if your dash is a grained texture you are pretty much restricted to mounting on the windshield which I found a bit annoying. I happened to have a CD slot mount, and we never use the CD player so I tried it. Couldn’t have found a better location!!



by:

Super easy installation on a camper that already had the underlying Furrion power supply wire. Great quality picture and audio. Highly recommend this for the price!



by:

I love this camera! It is so much better than I originally thought it would be. I use it for my rearview mirror when traveling, I can see who is behind my Camper and I don't have to use the add on mirrors on my tow vehicle anymore because I can see now with the backup camera in the rear blind spot and the rest with my tow vehicles mirrors. I also can now back my travel trailer into the campsites without my wifes help and do that with only one try. It has been such a nice experience using this camera system.

Randy

10/15/2022

I still love it! It is still awesome, I would not want to go camping without it. It has made my camping experience so much more pleasurable. If you don’t have one of these I highly recommend you get one .



by:

Looks easy enough to install based on already docking base in RV. Thanks for the great service.



by:

I like it a lot I double a travel trailer and a atv trailer it helps me keep a eye on the trailer behind the camper and is great for changing lanes. The only thing I would do different is get the bigger monitor.
Thanks



by:

Works great



by:

The RV back up camera work great once I got it hook up. But at the RV dealer and manufactory said was pre wire and had a cover with plug and play. Yell right I tried plug and play but was not the case the plug was there but had to hard wire in and do everything to splice the cable in to get to work. Just Lazy manufactory's this day and time. I'm sure the dealer assume it was wire in. I Have a new 2022 Cameo by Cross Roads that builds Red Woods I hate to know I pay $180,000.00 heck my RV was listed for $118,000.00. But over all the Furrion Vision S Wireless RV Backup Camera System works Great. Just be aware of the Lazy manufactory's anymore. I didn't take any pictures didn't have time after 15 min's turned in to 2 hours.



by:

The camera was easy to install. I just removed the preinstalled camera mount cover that came with the trailer. The window suction in the truck works great. I love how I can now see behind me when travelling. Also seeing what's behind me when backing up. I would recommend this camera. It is a wonderful asset.



by:

To easy to install!! thank you!



by:

If you own a 22 1/2' trailer and a SUV for towing you will find the range of the signal at its max with communication between camera and receiver. Meaning many times the signal is lost or there is a delay in the image. A vehicle will already be at your driver's side door when it shows up at your bumper on the screen. The view is VERY bubbled. Other than that LOVE LOVE LOVE it! Very helpful when it comes to backing up and hearing the individual assisting with instructions. No yelling needed and no disturbing your neighbors when parking.

Etrailer Expert

Jenny N.

1/6/2022

I recommend adding part # WVOSAPANTEXT to help boost the signal of the camera.



by:

Installed it on my new fifth wheel on the same day I got it. It paired up fast and has a great easy to see monitor. The only thing I need to look at is the power wire that was run from the trailer factory. The power comes on from the battery switch. I need to find away to turn it off when not use. If no switch, I need to put one in. Don’t need that draw on the batteries when not in use.

Roger G.

3/18/2019

It’s a great product and has already saved me several hundreds of dollars by catching problems with my second trailer just behind my fifth wheel.



by:

Everything I needed to add to my trailer. Even though the trailer came already prepped for the Furrion equipment, everything I would have needed was there. I had to find out how my travel trailer was pre-wired to feed power to the camera. My trailer was wired to the lights circuit, but did not connect with the automatic light setting, I had to switch on the lights. Can't wait to try it out on my next trip and return parking. Crossing my fingers.

Robert

4/22/2020

After 1st year it is great. I have a hard turn to back into my yard from a busy street. Able to get it done in normally 1 try. Thumbs up.



by:

I have the camera on the back of a travel trailer. Having a view of the road behind the trailer is indispensible and I am amazed that they are not legally required. I can also see my bikes on the back rack. The only reason I downgrade it one star is because the suction cup for the monitor in the truck often falls off the windshield.

Bradb

2/27/2021

Good camera. I gave up on the suction cup and prop the monitor up on the console, which is not ideal. It is almost impossible to see with sunglasses on.



by:

This camera was everything good said in previous reviews. Good viewing, easy to sync. A snap to install (on a Furrion ready trailer). It took longer to play with the setup in the truck than mounting the camera and that's just my husband being thorough...you get that, ladies. Shipped super fast and well priced. Thank you, George!

Patricia

3/13/2019

Still very happy with it! Side note the monitor base suction cup wouldnt stick to the F350 dashboard, our short term solution, and empty plastic CD case! We had a 12 in. plexiglass piece cut, later, and keep it in the glove box.



by:

My 2019 Keystone cougar was pre-wired for his camera. It made installing it very simple. I’ve used it for a year now and for the most part it has worked to my expectations. The only problem I am having is it cuts in and out briefly as I’m driving down the road. This does not cause any real problems and I’m not sure what is causing it. It’s either that distance is too far or had a loose connection I haven’t tracked it down yet. But I would recommend buying the system.

Etrailer Expert

Heather A.

6/2/2021

Thank you for your review. It does sound like the connection may be loose. I recommend to remove the camera from the shark fin mount and make sure the wire connections are fully seated with one another.

Joe

6/13/2022

Camera is still working well. It’s definitely a benefit to be able to keep track of traffic that is close behind me.


25
724
Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Recommended Camera System To Keep Eye On Trailer Behind Trailer
    The Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF is the best camera system we offer as it is used my many OEM's. It's wireless so you don't have to run any wires from the trailer back up the vehicle. It can be installed to turn on with the running lights so it will do a great job of helping you keep an eye on items behind the trailer at all times. The 4.3" monitor that is included is in color and super clear/easy to see.
    view full answer...
  • Does Furrion Vision S RV Camera System Need Hardwired Power Connection
    The camera on the trailer does need to be wired to a power source. Typically, the camera will draw power from the trailer's running lamp circuit so all you'll need to to to activate the camera system is to turn on the monitor and the headlights or running lights. It could also be installed to the reversed light circuit so it only comes on when the tow vehicle is shifted into reverse. The camera transmits wirelessly to the monitor.
    view full answer...
  • Recommended Backup Camera for Pre-Wired Keystone Laredo
    For your Keystone Laredo that is pre-wired for a backup camera the Furrion RV Observation Camera System # FOS43TASF will work perfectly. This system is specifically designed for pre-wired trailers like yours and it includes a really nice 4-5/16 inch full-color LCD monitor and a waterproof camera with a shaded design to reduce glare. The infrared LEDs on the camera housing also provides great nighttime vision.
    view full answer...
  • Recommended Backup Camera System for Pre-Wired 2018 Keystone Sprinter
    Based on my research your 2018 Keystone Sprinter is indeed pre-wired for a Furrion backup camera system. For your RV the Furrion Observation Camera System w/ Monitor # FOS43TASF that you were looking at will work perfectly. It is designed to work with pre-wired RVs like yours and it features a 4-5/16 inch full-color LCD monitor that you can secure to the windshield or dash using the included suction cup mount. The camera itself also uses infrared LEDs on the housing to provide excellent...
    view full answer...
  • Can You Replace the Monitor for the Furrion Vision Wireless Backup Camera FOS48TA-BL
    I do have an option for you but the monitors that come with Furrion Vision Wireless RV Backup Camera Systems are not available separately for replacement as the manufacturer does not offer this. I know this is not what you wanted to hear but the Furrion Vision 2 Wireless RV Backup Camera System part FOS48TA-BL is actually an old model that has been discontinued and replaced by the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF. Therefore, now would be a great time to...
    view full answer...
  • How Does Furrion Vision S Camera Unpair from Monitor
    To unpair a Furrion camera from a monitor you will just need to hold down the pair button on the bottom of the camera for 15 seconds.
    view full answer...
  • Why Does My Furrion Vision S Not Get a Signal in the Back of My RV?
    The most common issue we see with getting no signal at the back of an RV with the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF is due to a disruption of the camera's power wire. That is the first place you should check. One of the things that give you an idea of an issue is if none of your running lights are working on your trailer. This is usually a symptom of a blown fuse. In order to make sure we have other potential issues covered, I went ahead and...
    view full answer...
    Image 1 for
  • Recommended RV Observation Camera Setup With Maximum Wireless Range
    I'd recommend the Furrion Vision S system, part # FOS43TASF which has a 150 meter wireless range. You'll only get that kind of extreme range if there's no obstructions between the monitor and the camera, but on a typical RV type installation this should work perfectly for you. The RV manufacturers think highly enough of this system that many of them offer it as OEM equipment. The system also has night vision capability which is a very nice feature. I've linked to a product demonstration...
    view full answer...
  • Recommended Backup Camera for Sunset Trails SS239BH Trailer
    For a backup camera on your Sunset Trails SS239BH Trailer, I recommend taking a look at the Furrion Digital Wireless Observation System # FOS43TASF. This is a fantastic observation system that features a full-color, 4.3 inch display and infrared LEDs that surround the water-resistant camera to allow for night vision. The system can be wired to a constant power source for observation or to the reverse lights for a backup camera. I am not sure exactly what your trailer is equipped with...
    view full answer...
  • Troubleshooting Pairing Camera and Monitor with Furrion Digital Wireless System
    The Furrion Digital Wireless Backup Camera w/ Color LCD Monitor and Mounting Bracket - 4.3" Screen FOS48TAPK-BL being a wireless system may be experiencing some interference on the transmitting signal. You will also want to make sure that the trailer wiring for the camera is getting the power. Some systems are wired to the reverse light power in which case your trailer would need to be connected while the tow vehicle is shifted into reverse to sync. If you have the power wired into the...
    view full answer...
  • Pairing the Furrion Vision S Wireless RV Backup Camera System
    Pairing the Furrion Vision S Wireless RV Backup Camera System, # FOS43TASF, like ,many Bluetooth items can be challenging at times. I suggest checking your power, verify the correct voltage is reaching the camera and monitor. If it still doesn't pair, power down both units for several minutes and separating them beyond pairing distance. Then, power up each move close enough to attempt pairing again. Try to ensure the camera and screen are within 10 feet when pairing.
    view full answer...
  • Correct System for Forest River RV with Pre-Wired Backup Camera
    It sounds like you have a trailer which came pre-wired for a backup camera system. If that's the case you need to use the Furrion Vision S Wireless RV Backup Camera System. The trailer only comes with the camera mounting bracket from the factory which is the part number you provided. Therefore, you actual still need the camera as well as the monitor so you need a complete kit, part # FOS43TASF. This is a pretty common mistake. If for some reason you already have a camera then I'd need...
    view full answer...
  • Furrion Vision S Camera not Getting Power When Connected to Factory Plug
    It sounds like you may not have power getting back to the camera. Start the truck. Check the plug on the truck to make sure you have power coming from all the pins except one. One will be ground. Have someone run through the functions on the truck while someone test the pins. If you have power there, plug your camper into the truck and make sure all of the lights are working. Run through all of the functions again with the camper connected. If all that is good, check the factory wire on...
    view full answer...
  • Troubleshooting Furrion Back-Up/Obversation Camera Connection
    You can unpair your camera and monitor, and then attempt to pair them again using the setting on your monitor. If you get connection and all is well, you know they simply became unpaired and have solved your connection issue. If the connection is not resolved, then you know that the fall has in some way effected the receiver on your monitor and you will want to replace the system. Although the camera can be bought individually, the monitor cannot. You will want to replace the system...
    view full answer...
  • Troubleshooting Furrion Vision S Monitor and Camera Not Pairing
    A couple of things to check when trying to pair monitor to the camera for the Furrion Vision S # FOS43TASF. First make sure that the monitor is close enough to the camera. Next make sure that the camera is receiving power (indicated by LED light on camera). If it is then be sure to hold the pairing button on the camera for 2 seconds before pairing with the monitor. I have attached a clip from the troubleshooting section for the Vision S that you can use to try to get the monitor and...
    view full answer...
    Image 1 for
  • Troubleshooting Furrion Backup Camera and Monitor Connection and Pairing
    The Furrion FOD43TA-BL is the older model. Then came the Furrion Digital Wireless Observation System w/ Color LCD Monitor - 4.3" Screen FOS48TA-BL and the current model is # FOS43TASF. It sounds like there may be an issue with the transmitter and receiver, so I recommend putting the monitor close to the back of your trailer to test pairing and see if it will work even with a short distance. Then gradually move the monitor to see if there is interference or loss of connection. Sometimes...
    view full answer...
  • How is Brightness Controlled on Furrion Observation System
    To adjust the screen brightness of the monitor that comes with the Furrion Observation System part # FOS43TASF you'll use the up and down buttons on the right side of the monitor till you find the picture setting. You'll hit the confirm button and then once there use up and down to navigate to brightness. I attached pictures I took from the manual for the system for you to check out as well. If you had one of the larger screen versions of the Furrion setups the only difference is that...
    view full answer...
    Image 1 for Image 2 for
  • Will The Furrion Digital Wireless Observation System Part # FOS43TASF Work Continuously
    The rear view camera function on the Furrion Digital Wireless Observation System part # FOS43TASF can be setup to run continuously or only when a certain function of the vehicle is activated, such as while reversing. This will all depend on which circuit you wire the power to on the monitor. For example, in order to use the camera only while in reverse, you will want to attach the power wire to the vehicle's reverse circuit. In order for the monitor to operate continuously, you will need...
    view full answer...
  • Auto Off Feature of the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision
    Per the instructions on page 17of the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision, # FOS43TASF, use the up/down arrows to highlight the LCD AUTO OFF menu, make selection then enter. From the instructions it appears you can select if the screen is on or off after a set period of time. If you select off, you then have the option of selection of setting the the amount of time on before auto off. You can select 10 sec, 20 sec, etc. or turn this auto off option off altogether...
    view full answer...
  • Tips for Difficult to Pair Furrion Observation System Camera
    First thing to try is make sure your tow vehicle is running when trying to pair the camera to the monitor of the Furrion kit part # FOS43TASF we've seen low voltage on the trailer wiring prevent the camera from wanting to pair in the past. Try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.
    view full answer...
    Image 1 for
  • What Causes the Furrion Vision Wireless RV Backup Camera System Not To Shut Off
    The Furrion Vision Wireless RV Backup Camera Systems like part # FOS43TASF (New) or part FOS48TAPK-BL (Old) should be wired either to the reverse light circuit or the running light circuit. Therefore, the camera should only be on when the reverse lights or the running lights are on. I am not sure how your camera is wired but if you pull the camera mounting bracket back from the trailer and note the wire color, this can then be used to trace this wire down and see where the camera is getting...
    view full answer...
  • Does Trailer Have to be Pre-Wired to Use Furrion Vision S Camera
    That's a very good question and the answer is you can absolutely use the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF and run your own wiring to the running lights if your trailer is not pre-wired. You will only need 18 gauge wire to run to your wiring and you will be able to mount the camera where you see fit, as outlined in the linked installation instructions. I have added a link to a video review of this system for you to...
    view full answer...
  • How to Pair Furrion Wireless RV Camera to Monitor
    Try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.
    view full answer...
    Image 1 for
  • RV Observation System Recommendation for 2019 Heartland Elkridge 290RS
    It would be really awesome if there was an RV observation system that could wire into the console display of your truck but at this time that's not something that's available, but your 2019 Elkridge 290RS is pre-wired for the Furrion system part # FOS43TASF which I recommend for you. This system will install very easily since the hard part of the install is already done on your trailer and since this kit has the best reception of the kits available it is the best way to go.
    view full answer...


< Previous
123. . .39



Do you have a question about this RV Camera System?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Installed by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Thomas T
Video by:
Thomas T
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Adam Y
Updated by:
Adam Y
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Kevin C
Test Fit:
Kevin C
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.