bing tracking image
  1. Accessories and Parts
  2. Reese
  3. Weight Distribution Hitch
  4. Chain Hangers
Chain Hangers for Reese Weight Distribution Systems - Bolt On

Chain Hangers for Reese Weight Distribution Systems - Bolt On

Item # RP58305
Retail:$149.44
Our Price: $93.39
You Save: 38%
Accessories and Parts
Shipping Weight: 4 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
As an alternative to traditional lift brackets, these bolt-on chain hangers provide an attachment point for your weight-distribution spring bars without interfering with trailer-frame-mounted items. 1-800-940-8924 to order Reese accessories and parts part number RP58305 or order online at etrailer.com. Free expert support on all Reese products. Great prices and Fastest Shipping for Chain Hangers for Reese Weight Distribution Systems - Bolt On. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (66)
  • Q & A (0)
  • Photos

Reese Accessories and Parts - RP58305

  • Weight Distribution Hitch
  • Chain Hangers
  • Reese

As an alternative to traditional lift brackets, these bolt-on chain hangers provide an attachment point for your weight-distribution spring bars without interfering with trailer-frame-mounted items.


Features:

  • Chain hangers provide attachment points for weight-distribution spring bars via chain
    • Specially designed to eliminate clearance problems by attaching to the side of trailer tongue
  • Quick, bolt-on installation
    • Drilling required
  • Black powder coated steel resists corrosion
  • 2 Hangers and all necessary hardware included


Specs:

  • Tongue weight: 1,400 lbs
  • Gross towing weight: 14,000 lbs
  • Application: trailer frames no wider than 2-1/4"
  • Hanger dimensions: 5" wide x 3-5/16" tall
  • 4 Bolts are 3-1/2" long
  • 4 Shorter bolts are 1-3/4" long
  • Distance between mounting holes: 3" center to center
  • Installation tip: distance from the center of chain hangers to the center of hitch ball should measure approximately 31"
  • Limited lifetime warranty


Note: To achieve the required amount of tension for your weight-distribution system's spring bars, you will need to jack up your trailer when hooking up the weight-distribution spring bars.



58305 Reese Bolt-On Chain Hangers for Weight Distribution Hitches

Installation Details RP58305 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Chain Hangers for Reese Weight Distribution Systems - Bolt On - RP58305

Average Customer Rating:  4.8 out of 5 stars   (66 Customer Reviews)

As an alternative to traditional lift brackets, these bolt-on chain hangers provide an attachment point for your weight-distribution spring bars without interfering with trailer-frame-mounted items.

by:

These were a great solution to my issue. My trailers's propane tank, battery box, and winch prevented me from using the mounts that came with my weight distribution hitch. Installation was straightforward and only took about a half an hour. These chain hangers are easy to use too! Very happy eTrailer customer (again!).

Todd E.

5/28/2014

These chain hangers are still working out great! No issues at all. I would definitely buy them again.



by:

I couldn't fit my Weight Distribution Hitch on the used trailer I recently purchased because of the nice tool box that was mounted on the V Tongue of the Trailer. With the tool box I couldn't pull over the chain attach brackets. Called E-Trailer and Kathy recommended the Chain Hangers PN: RP58305. They were an easy install and were exactly what I needed. The Service and shipping from E-Trailer was Excellent.



by:

This sway system is the best I have ever used. I pulled a 16ft cargo trailer through the mountains with a Sierra 1500. The rig stayed very stabile and I had zero issue with sway.



by:

This product worked great for me. I had mounted a small generator on the front not making the regular flip chain connectors work. The best way to use this product is with a electric tongue jack. Connect the hitch raise the back of the truck to connect the chains then lower to put the tension on the bars. Easy as pie just make sure if you are buying a jack to get a higher rated one. Highly recommended

Michael W.

6/26/2018

Still working like a champ.



by:

The chain hangers for my new trailer appear to be great quality. They solved the problem for connecting the Reese load levelers on a pointed front enclosed trailer, which has a very short tongue.

Dean Z.

4/28/2018

The Reese chain hangers have worked Great! Makes towing a joy!



by:

This hook operates as expected. No issues installing if what you're installing it to is appropriate. Comes with long and short screws, so it works on hollow beams and C channel frame members at the front of your trailer. Can't comment on the durability of the finish, as I keep installing these on rental campers and never see them again! Well, we all know Reese and the hitch industry overall has significant corrosion issues they just seem to ignore over the decades - their process isn't up to par in my book. That said, the finish seems thick enough and the steel is so thick that rust in this case will be only an optical issue. I like the fact that they are delivered with nylock nuts. I spray the drilled holes (both sides) with aerosol grease before a bolt everything up, to prevent rust on the frame once THAT finish is broken open. Then I hit the fasteners too, to prevent rust. I'm a repeat purchaser, and from experience believe strongly in weight distribution hitches even on small travel trailers, it's just SO much more stable.



by:

Solved my issue with an old Reese hitch and no room for over the top of frame brackets.



by:

The parts I ordered were a great fit for my V nose trailer. After I installed all the pieces I was able to use my load level hitch without having to cut or modify my trailer . The customer service rep. was very helpful in selecting the correct part for my application. Thanks Paul L.



by:

They mount easily and work as intended. With a V-nose trailer there is no way I would have been able to use the WD hitch without bolt on chain hangers. These enabled me to hang the chains further behind the V-nose on the frame. I just wish these had been included in a WD hitch package intended specifically for trailers without sufficient free space over the frame.



by:

The product was well priced and delivery was very fast (3 days)

I was unable to find any other product anywhere that would work for my setup. Every trailer store I contacted had no idea where to direct me as they knew of no product on the market that would work.

I have a V-Cross 32FKDS. Because of the V nose I am unable to use the traditional load level system. the V extends all the way to the trailer jack.

I bought the trailer new and had it delivered to a seasonal lot in 2010 where it has remained. We are looking at moving to a different campground and delivery was $250-$350. For the price this seemed well worth a try.

I am hoping once this product is installed it will keep the trailer and my 3/4 ton level for towing.



by:

This product will not fit up with a Curt Weight DIstribution System with Shank - Trunnion Bar (#c17345).

It's hook will not accept the chain. It is too big.

Fast Shipping, just wrong part suggested by etrailer expert.



by:

seems to be a quick fix for my situation, I ordered weight distribution system but was not aware that my v-nosed trailer would be a issue with brackets that came with kit



by:

Was pleased to find the bolt on hitch brackets at etrailer. Finally a solution to the problem of adapting my equalizer hitch to two different trailers. Install looks to be straightforward.



by:

Great service and product.Worked like a charm on our 20' open car trailer with toolbox.Thanks !



by:

These worked great. I have a rig with a funky battery tray configuration that the spring bar chains kept getting snagged on and snapping the U bolts when using traditional hangers. These solved the problem!



by:

Solid build, should be the perfect solution for a WD hitch which the trailer has the body over the beams where the brackets would go



by:

Product was well made and installed in a matter of minutes to allow the use of a weight distrubution hitch on a V nose travel trailer.



by:

Very easy hook-up, no problems with unit. Balances trailer weight wonderfully. Smooth, even when turning. Also dampens sway of trailer.



by:

Fixed my issue. The hang over type don't work with my tounge jack in the way. Also cross beam is border line in the way. These you can line the chain up perfectly.



by:

These are a must for V nose trailers if your using a weight distribution hitch. Over the tongue saddle types won't fit because of the nose section over hang. Kit comes with everything for mounting and easy to follow instructions.



by:

This is the only choice for a V-nose trailer. I must say more importantly than the product because it is Reese so it is good but etrailer is a great and easy place to do business with and I am in a crunch and need to get this on the road they get your product to you super fast. Excellent Service Thank you etrailer!



by:

It was shipped in a timely manor. The product seems to be built well and should last a very long time. The instructions where clear once you studied the pieces and gained a understanding of how the product works.I will be using it to cross the country from Washington to Pennsylvania. I hope it works as advertised



by:

Quick delivery and excited to try it



by:

This is the first time I have ordered through etrailer.com and it will not be the last. My order came quicker then I thought and in excellent condition. The quality looks very good also. GeorgeJ@etrailer was very helpful and professional. I highly recommend etrailer.com.



by:

Service was exellent. On time delivery was great ordered it Saturday ground received wednesday. Installed Wednesday looks good. Made a difference on my truck


25
66
Show More Reviews

See what our Experts say about this Reese Accessories and Parts

  • What Normally Causes Trailer Sway
    The biggest cause of trailer sway like what you described is improper trailer loading. Typically it's due to not having enough tongue weight relative to the total trailer weight. Ideally you have the tongue weight between 10 and 15 percent of the total trailer weight and the sway will stop. The other possibility is that your trailer nose is too high which causes a similar issue.
    view full answer...
  • Recommended Weight Distribution and Electric Jack for an Airstream Basecamp 16
    I highly suggest the etrailer.com Electric Jack # EJ-3520-BBX for the Airstream Basecamp 16. This has a pretty standard A-Frame mounting plate that will have no issue fitting the front of the trailer. It is also rated up to 3,500 pounds of lifting capacity and will be ideal for this set up. As to the weight distribution, the Fastway e2 Weight Distribution System # FA92-00-0600 will have a maximum tongue weight of 600 pounds and a minimum tongue weight of 250 pounds. This will put you right...
    view full answer...
  • Weight Distribution Solution for Trailer with Propane Tanks Above Trailer Frame
    Since you have propane tanks above your RV frame in the location that the spring bar hangers would need to install you'd want to use a system that instead uses chains like the part # RP66131 for how the bars attach to the frame hangers and then instead use bolt on brackets like the # RP58305 which attaches to the side of the frame and does not require clearance above the truck frame.
    view full answer...
  • How to Use Bolt On Weight Distribution Chain Hangers on V-Nose Trailer
    Using the bolt on hangers # RP58305 will change the procedure for installing the spring bars and hooking the chains to the trailer, since you won't have a snap-up bracket to provide slack in the system so the chains can be hooked up. With the bolt on hangers used, you'll jack up the trailer WITH the coupler attached to the trailer ball. This lifts not only the trailer, but also the rear of the tow vehicle as the same time. This will provide enough slack in the system so that the spring...
    view full answer...
  • Best Weight Distribution System for a 28 Foot Haulmark Enclosed Trailer
    If the gross vehicle weight rating (GVWR) of your Haulmark Enclosed Trailer is 10,000 lbs then I can estimate that the tongue weight will be at most between 1,000 lbs and 1,500 lbs if properly loaded . You are also going to want to add the weight of any cargo stored behind the rear axle of the tow vehicle when choosing a weight distribution system. Therefore, I recommend taking a look at the Strait-Line Weight Distribution w Sway Control part # RP66130 which is rated for a total tongue...
    view full answer...
  • How to Pick Out a Weight Distribution System for a 34 ft V-Nose Trailer
    When picking out a weight distribution system the most important figure to consider is the loaded tongue weight of the setup. Thats with everything loaded in the trailer plus the weight of any cargo behind the rear axle of your tow vehicle. If the 900 lbs you listed as your tongue weight is the loaded tongue weight then the Curt Weight Distribution System # C17322 you referenced would be a good choice because of its 800-1,000 lb tongue weight range. If you need additional tongue weight...
    view full answer...
  • Can Bolt-On Chain Hangers be Used on a Jayco 222 Octane SL 2016
    Yes I believe you are right. Chain hangers # RP58305 would be the way to go. You will need to use the trailer jack to be able to hook up or remove the spring bars but otherwise they are the perfect solution.
    view full answer...
    Image 1 for
  • Weight Distribution Hitch For Trailer with Welded Frame Plate
    You are correct that the welded plate on your trailer frame will obstruct the installation of most weight distribution brackets. The best solution for your case is to use these Chain Hangers # RP58305. These bolt on to the side of your trailer frame to provide a mounting point for the weight distribution system, as opposed to the typical clamps that need to fit all the way around your trailer frame. With these chain hangers, you can use a weight distribution system, such as the Reese...
    view full answer...
  • Weight Distribution Recommendation for a 2014 Shasta Oasis 26DB Travel Trailer
    When looking into purchasing a Weight Distribution (WD) system you want to find one with a Tongue Weight (TW) range that the Total Tongue Weight (TTW) of your towing setup falls in the middle of. To find the TTW of your towing setup you will need to add the TW of your fully loaded and ready-to-go trailer, which you can use part # e99044 for, along with the weight of any cargo behind the rear axle of your tow vehicle. Keep in mind that a properly loaded trailer will have a TW that is 10-15%...
    view full answer...
  • Best Weight Distribution System for a Forest River Rockwood Geo Pro G19FD
    The trailer coupler on your Forest River Rockwood Geo Pro G19FD is a top mount otherwise known as an overslung coupler. With that being said, due to the limited amount of space you have on your tongue, I really don't think the Fastway e2 Weight Distribution System part # FA92-00-0800 is the best option for you. In order for the Fastway e2 to work, you need space available on the frame 27" - 30" back from the center of the trailer coupler. The best option for you with limited frame space...
    view full answer...
    Image 1 for
  • Solution for Adding Weight Distribution with Sway Control to V-Nose Trailer
    There is a way for you to use weight distribution with sway control on your V-nose trailer, so long as it has a frame that is not wider than 2-1/4". For that you can use the Chain Hangers for Reese Weight Distribution Systems # RP58305 which can be bolted or welded onto the exterior of your V-nose trailer frame and is compatible with chain-hanger style weight distribution systems. For this I highly recommend the Strait-Line Weight Distribution with Sway Control # RP66073 which is for total...
    view full answer...
    Image 1 for Image 2 for
  • Recommendation For Weight Distribution on 20 Foot V-Nose Car Hauler
    On a trailer with a V-Nose you cannot use the standard weight distribution systems with the chain hangers for the spring bars that go over the top of the trailer frame, but a simple bracket switch, and you can use a weight distribution system. Traditional chain hanger brackets go over the top of the frame, but a V-Nose trailer cabin sits on the top of the frame where the brackets need to go. With the V-Nose configuration, and only 24 inches of room, you will not be able to use the Reese...
    view full answer...
  • Weight Distribution for 2017 Ford Expedition Expedition Towing Camper
    Normally for trailer frames like yours where there is interference above the frame you have to use a set of bolt on weight distribution frame brackets like the # RP58305. Normally this doesn't void the warranty of a trailer. Then you could use a weight distribution system like the part # RP65509 which would work great with your tongue weight range. A WD system is preferred over suspension enhancement as it reduces suspension sag as well as improves handling and braking so it's the way...
    view full answer...
    Image 1 for
  • Weight Distribution Chain Hanging Brackets for 4 Inch Wide Trailer Frame
    None of the frame mounted chain hangers will fit a 4 inch wide trailer frame but I do have a solution for you. You will need to use a bolt-on hanger system on the wider frame, # RP58305, or # C17005. Please note these hangers have not been tested with the EAZ-Lift weight distribution systems.
    view full answer...
  • Weight Distribution for a V-Nose Trailer with 850 Pounds Tongue Weight
    You can use weight distribution on a V-nose trailer but you may need alternate hangers if there isn't enough space available on the frame for the regular hangers. But first, when determining tongue weight, also factor in the weight of anything loaded in the towing vehicle behind the rear axle. You will want a system that has a tongue weight capacity range that encompasses the tongue weight plus the weight of cargo behind the rear axle. A Reese system, # RP66542, has a wide range of 600...
    view full answer...
  • Possible Solution to Allow Weight Distribution to Install on Trailer with Frame Interference
    We don't have a short enough spring bar that will work well for you, but there's a possibility we might have a solution that would work well. In some situations like what you described a set of bolt on style frame brackets like the part # RP58305 would be the solution. This allows you to bolt the chain hangers to the side of the frame which bypasses any frame interference issues that typically prevent a WD from being able to install.
    view full answer...
  • Weight Distribution Recommendation for Trailer with 525 lb Max Tongue Weight
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. If you know your tongue weight is...
    view full answer...
  • Recommended Weight Distribution Hitch for V-Nose Rockwood 2618VS
    Based on your Rockwood 2618VS gross weight, I recommend you go with the Equal-i-zer # EQ37120ET over the # EQ37100ET. Tongue weight is typically 10-15 percent of the gross capacity so that puts your Rockwood at 770-1155lbs. Which the # EQ37120ET is much better suited for, you will want to fall within the middle of the weight capacity for best support. The Equal-i-zer weight distribution mounting brackets need to be positioned 27 inches to 32 inches back from center of coupler. If your...
    view full answer...
  • Heavy Duty Weight Distribution System for a 14K Trailer with an I-Beam Frame
    I spoke with my contact at Reese and he said that you will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System # RP66131 that you have referenced, for your I-beam trailer. To use the Heavy Duty Trunnion Weight Distribution System, # RP66131, you will need to have a steel plate 5 or 6 inches wide welded, by an experienced welder, at 30 inches on center from the center of the hitch ball. Before modifying the trailer frame you will need to...
    view full answer...
  • Weight Distribution for a 2018 Jayco Octane SL 272 with 1,000 to 1,500 Pounds Tongue Weight
    I looked up your 2018 Jayco Octane SL 272 (nice trailer) and I noticed a couple of things about it that could affect the fit of a weight distribution system such as # RP66074. First I noticed that on the frame behind the propane tanks it looks like there is a metal structure welded to the bottom of the frame. With the weight distribution brackets in place on the frame that extra piece on the trailer frame could make contact with the spring bars. The brackets mount 30 inches back along...
    view full answer...
  • Using a Weight Distribution Hitch With V-Nose Toy Hauler Trailer
    In order to use a weight distribution hitch with your v-nose trailer, you are going to need to use chain hangers # RP58305 to bolt onto the sides of your trailer frame and a system such as the Reese Strait-Line # RP66084. In order to choose the best weight distribution system, you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle. To determine...
    view full answer...
  • Weight Distribution and Bolt On Bracket Recommendation for a Trailer with Propane Tanks
    There is a bolt-on bracket available that is designed for applications just like yours. Part # RP58305 is designed for trailers that have propane tanks or other accessories mounted on top of the frame rails that would prevent a normal snap up bracket from being installed. Since these bolt to the sides of the trailer frame clearance above the frame member isn't required. This would work great with the # RP66084 as long is this is the properly rated system for your setup. The best way to...
    view full answer...
  • How To Unhook Chains When Using Reese Weight Distribution Chain Hangers # RP58305
    Unhooking the chains on Reese Weight Distribution Chain Hangers, part # RP58305, has not been a problem for us. We have not had many problems with unhooking the chains, only questions on the proper procedure to removing the chains. The # RP58305 chain hangars do not work the same way as the lift up brackets. The important things to remember when unhooking these chains is to keep more weight on the jack when jacking up the trailer and to make sure the truck and trailer are in a straight...
    view full answer...
  • Recommended Adjustable 10K Ball Mount with Sway Control Bracket for Dump Trailer
    For your 10K capacity for an anti-sway bar, you would need to utilize a weight distribution head and shank. For a friction bar like # 83660, I recommend the Replacement Weight Distribution Bolt-Together Round Bar Head # PS58442 and weight distribution shank # C17100 for you application. This will allow you to use two sway bars if desired. It also gives you the option of adding weight distribution with round bars # PS58441, chains # 3216, and bolt on hangers # RP58305.
    view full answer...


< Previous
123. . .17



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.