In-Line Circuit Breaker - 20 Amp - Perpendicular Mount Bracket
(94 reviews)
Price: $5.55
In Stock
In-Line Circuit Breaker - 20 Amp - Perpendicular Mount Bracket
Item # 9506P
Retail:$32.99
Our Price: $5.55
You Save: 83%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (94)
- Q & A (0)
- Photos
Pollak Accessories and Parts - 9506P
- Wiring
- Circuit Breaker
- Pollak
- 20 Amp
Features:
- Metal housing with perpendicular mounting bracket
- 2-Piece design
- Attached by spot welding
- Cycling automatic reset
- Cycles continuously during over-current condition
- Returns to run mode when source of over-current is removed
- (2) 10-32 Studs
- Yellow, dichromate plating (copper color) on battery terminal
- Zinc plating (silver color) on auxiliary terminal
- Straight mounting bracket
- SAE Standard J553 compliant
Specs:
- Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls
- Terminal dimensions: 0.66" long
- Current rating: 20 DC amp
- Voltage rating: 12 VDC (Voltage Direct Current)
- Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C)
- Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C)
- 1-Year limited warranty
54-220 Pollak Single-Way, Thermal Circuit Breaker - Cycling/Automatic Reset - 90-Degree Mounting Bracket - 20 Amp
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Too difficult to install
Customer Reviews
In-Line Circuit Breaker - 20 Amp - Perpendicular Mount Bracket - 9506P
Average Customer Rating: 4.9 out of 5 stars (94 Customer Reviews)
by: Jim R.07/07/2014
Ordered two curt venturer brake controllers,after calling a local trailer shop that wanted $370-$400 dollars to install them I figured I'd do it myself. After watching videos from etrailer and youtube I installed one in my 2003 Ford Ranger and one in my wife's 2101 Town and Country. Everything was pretty much straight forward, just take your time and follow the video's. Very happy and saved hundred's by doing it myself. Here are some pictures of the two vehicles.
by: Chris 02/12/2024
Everything was perfect.
by: Morris04/16/2020
Perfect connector for what I was looking for on my 2019 RAV4. I originally installed it with the L bracket, but later changed it to be flush in the bumper. Looks very clean. The prefab pigtail made install into the car very easy as well.
by: bowtieollie04/18/2017
Excellent quality and strength. Why skimp on something as important as your hitch? I have purchased three of these Draw Tites - I guess a repeat customer will scream about the true quality a company can garner from repeat customers. When you pull show cars worth six figures, you can't afford a poorly made hitch.
Step up, step out, and don't fret what you are pulling.
by: J.C from Bay City02/24/2014
Ordered a brake controller and an inline circuit breaker. Very happy with both but not the shipping. I selected the least expensive (my bad) shipping because I didn't need it for a few days. I opted for the UPS/US Mail combination shipping, what ever that is. Product shipped same day as I ordered it (Feb 11th) with an expected delivery date of Feb. 15th. Finally showed up on the 20th. I ordered a hitch earlier and in 2 days I had it. A 49lb hitch vs. a pound (maybe) package. Not etrailers fault...but I can see why the post office is going broke with service like that!
by: Kevin03/05/2016
Bought several trailer products for our 2013 Explorer, Tekonsha trailer brake, trailer hitch & wiring materials. Excellent fit on the trailer hitch. Shipping timely & well packaged.
by: Chris T.04/14/2015
Installed the Hopkins InSight brake controller in a 2015 Wrangler Unlimited. Installation was straightforward with no problems. The biggest plus with this unit is the ability to mount the "brain" out of sight and mount the display and the manual control in separate, convenient locations. Very nice. Also ordered a 20A breaker, extra wire and an extra harness connector (for another vehicle). All items arrived on time and well packaged. etrailer gets a big thumbs up!
by: Tom P07/06/2017
Just what the etrailer video showed to add a Tekonsha Primus IQ trailer brake controller to a Chevy Silverado. ( I could have used a bracket as well ). Super fast shipping!
by: Lynn E10/30/2017
I ordered everything I needed for wiring and towing with my new vehicle. As in the past, etrailer promptly shipped all that I ordered. A very reliable and helpful company to deal with. UPS was a little less than gentle with the package but the driver waited while I determined that nothing had fallen out of the holes in the box.
by: Chris L.07/14/2017
I HAVE PURCHASED SEVERAL ITEMS FROM E TRAILER . FROM TRAILER PARTS TO REBUILD A CONSTRUCTION TRAILER TO PARTS FROM MY FIFTH WHEEL CAMPER . THE QUALITY OF THEIR PARTS HAS ALWAYS BEEN THE BEST .
by: James c.01/05/2017
With the good instructions the cb works good .
by: Keith A.08/12/2012
Works great. You definitely want to use this and not a fuse for a trailer brake controller. If an intermittent short blows a fuse, you will lose your trailer brakes. This circuit brakes auto resets so your trailer brakes won't be lost.
by: Dave07/23/2012
Easy to install (two screws to mount it and two nuts for the wire connectors), well labeled for which wire goes where, and works well. Much nice than a fuse, and essential when protecting a trailer brake circuit!
by: James03/14/2019
Perfect little circuit breaker for 12 volt supply to trailer fridge!
by: Douglas03/11/2023
Works great. No problems
by: Jim08/27/2021
Needed for my installation. etrailer staff was very helpful in helping me order all the pieces that I needed.
by: Carl01/11/2018
Met my expectations, good installation instructions and performed well throughout the summer and fall of 2017.
by: Lew Albery12/23/2010
Little details make the differenc!I bought this product for future (1 month) installation in an used van that I purchased. I received the product in a fantastically short period of time. I am very impressed with the quality of the workmanship and materials.
by: Michael01/24/2020
Great service, and research given with the representative to order the correct parts needed. I am a returning customer for this reason and will again in the future.
by: Cey107/30/2014
I used this to replace a rusted out circuit breaker in my 78 MGB. Looks almost exactly like the unit it replaced.
by: Talmadge05/31/2016
Didn't need the post, fuse box on the truck already had them. Everything else worked fine.
by: George S09/10/2020
Easy installation and works as expected
by: ray03/29/2016
your speedy delivery service and profesional service is valued to us smal people wil be doing feature bisness thks
Ray
3/29/2017
very well am very happy whith all the products from etrailer
by: JJ09/29/2014
Right price good circuit breaker
25
94
Show More Reviews
See what our Experts say about this Pollak Accessories and Parts
- How to Install a Trailer Brake Controller in a 2003 Jeep Liberty and 2006 Mercedes ML500First, I will say that the Tekonsha P3, # 90195, is an excellent brake controller and would work well on both the 2003 Jeep Liberty and the 2006 Mercedes ML500. This brake controller is compatible with electric brake systems and electric over hydraulic brake systems. It also includes a multi-color display and can run diagnostics. The only thing is that you will need to hardwire the controller in both vehicles because a quick plug-in adapter is not available for either vehicle. But installation...
view full answer... - What Circuit Breaker is Needed for a 2011 Chevrolet Silverado with Tekonsha Brake ControllerThe correct size circuit breaker for the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 installed on your 2011 Chevrolet Silverado will vary depending on the number of braked axles your trailer has. Since you only have one braked axle then you are going to want to use a 20 amp circuit part # 9506P. The black 12 volt wire from the brake controller will need to be attached to the silver "AUX" terminal on the circuit breaker and the copper "BAT" terminal will need to be attached...
view full answer... - If Hardwired In Does Hopkins Brake Controller Need to be Re-Set Each Time Engine Turns OnMy technical contact at Hopkins confirmed that if the Hopkins Agility brake controller # HM47294 that you referenced is installed correctly your settings are saved in the memory when the engine on your 1996 Chevy S-10 pick-up is turned off. If you bypass the installation instructions and run it through your fuse panel then the brake controller may shut off and need to be re-set each time your vehicle is started. According to the installation instructions which I have attached you will...
view full answer... - Dim Display When Installing Tekonsha Prodigy On 1999 Dodge VanI spoke with my contact at Tekonsha about your 1999 Dodge van and the Tekonsha Prodigy Brake controller. They told me that if you are having a problem with a display being dim, you may have an issue with the ground wire connection. You want to make certain you have a good ground connection, or it can cause issues with the display and function of the controller. When you are hard wiring the controller you can use a circuit tester, part # PTW2993, to test the wires you are connecting to...
view full answer...
- Installing a 7-way Trailer Connector On 2010 Nissan Xterra with Existing 4-way ConnectorSince you already have a relay harness installed from the # 118525, you will be able to install the 7-way harness # 118267 in place of the 4-way harness from # C56225. If you plan on using a trailer with electric brakes, you will need a brake controller to provide braking power to the trailer brakes. I recommend the Tekonsha Prodigy P3 # 90195 with Plug-In Wiring Adapter # 3050-P. This adapter will plug into a port under the dash of your Xterra and in the back of the brake controller....
view full answer...
- Protecting Tekonsha P2 Brake Controller Usually with lower quality brake controllers something like a 20-AMP # 9506P or 30-AMP Circuit Breaker # 38630 would work (20-AMP for 2/4 brake and 30-AMP for 6/8 brake applications). Most wiring harnesses come with inline fuses integrated with them but if not, you can use the circuit breakers above. The 20 or 30 AMP circuit breakers can handle the max current generated by the controller. You are correct, a 50 PIV Diode would also be a way to protect, but the Tekonsha Prodigy P2 is a...
view full answer... - How to Wire a Draw-Tite Activator 5504 to a 2009 Toyota TundraIf your 2009 Toyota Tundra came with a 7-Way connector installed at the rear bumper, there is a port for a brake controller under neath your dash. With the Actavor from Draw-Tite, you would also use part # 3040-P and cut off the black connector. You would match the wires color for color with the wires on the Activator # 5504, and then plug in the connector to the port underneath the dash. If you do not have the factory installed 7-Way, you will have to hardwire the Activator # 5504 into...
view full answer... - Installing a Brake Controller Onto a 2015 Jeep Cherokee With Aftermarket 4-way and 7-way InstalledI can help you finish up the installation of your brake controller on your 2015 Jeep Cherokee Limited. I really like the Tekonsha P3 # 90195. This brake controller is a proportional controller, which means whatever pressure you press the tow vehicles brakes it will apply the same pressure and intensity to the trailers brakes. It also has a customizable full display screen which provides you with a full error messages instead of codes that need to be deciphered. If you go with the P3 Brake...
view full answer...
- Recommended Brake Controller to Use on a 2015 Fleetwood Expedition 38 Ft Class A MotorhomeThe brake controller that I recommend for your application is the Tekonsha Prodigy P3 # 90195 because of how easy it is to setup and how easy it is to operate. It does come with a pigtail so to install it in your 2015 Fleetwood Expedition Class A Motorhome so you will just need to connect the wires to the following functions: White - Ground Blue - Brake Controller Pin on 7-Way Connector Black - 12V Power (you will need a 20 amp breaker # 9506P for 2-4 brake applications) Red - COLD side...
view full answer... - Troubleshooting No Power to Brake Controller on 2007 Chevy TahoeAssuming you made the correct connections under the hood of your 2007 Chevy Tahoe (I have attached an article to assist that you can reference to be sure) it's very possible that you blew a fuse during the sparking incident. I recommend checking your copy of the owner's manual for any fuse locations related to these wires that you can check, replacing if needed. Your other option is to just bypass this factory wire altogether. To do this you can simply run the black wire from your Tekonsha...
view full answer... - Can I Install Curb and Rock Lights Above My Axles Connected to Turn Signal But Solid Light?The easiest way to get your curb or rock lights above your axles to turn on is to connect them to your brake lights. You can isolate that signal using the Pacer Performance 3rd Brake Light Logic Module # PP20-702 and then the lights will turn on when you hit your brake pedal so you can see the curb or any rocks near your axles. This won't work to make your turn signal activate but instead your brake pedal. This is the only way of wiring I can think of to get you the function you desire...
view full answer... - Can 2006 Ford F-350 with Integrated Brake Controller be Bypassed with AftermarketI spoke with my contact at Tekonsha and he stated that there are two ways that you can install an aftermarket brake controller in a 2006 Ford F-350 with an integrated brake controller. The first way is to hardwire in the controller. The white wire goes to the negative battery terminal, the black wire to the positive battery terminal via a 20 or 30 amp circuit breaker, # 9506P. The red wire connects to the circuit on the brake switch that shows a signal on a circuit tester like, # PTW2993,...
view full answer... - Prodigy Brake Controller Installation Instructions for 2010 Jeep Commander Limited with Tow PackageBrake controllers are not vehicle specific, so you will be able to use the Tekonsha Prodigy, # 90885 on your 2010 Jeep Commander. To install a brake controller, you will need to do a little hard-wiring. The only wire Jeep provides to install a brake controller is the electric brake output wire that goes back to the 7-Way trailer connector. This wire is probably a light green wire that is behind the in-cab fuse box. It will connect to the blue wire on the brake controller. You will still...
view full answer... - Dimensions of Straight Mount and Perpendicular Mount Pollak 20 Amp Circuit BreakersBoth the # PK54520 Straight Mount and # 9506P Perpendicular Mount Pollak 20 amp circuit breaker are 11/16" long. They have a distance of 1-9/16"center to center for the mounting holes, so as long as you have that amount of space you would be able to mount either breaker. I've added links to video reviews of both circuit breakers for you to take a look at.
view full answer... - Troubleshooting Tekonsha Prodigy P3 Having 0.0 Output When Brake Pedal Is PressedIt sounds like there is a few different issues going on with the Tekonsha Prodigy P3 # 90195 in your vehicle. Starting with the output you should see output on the controller when you are applying the brakes on the vehicle. Since the output goes up with the manual override lever engaged it is likely that the red wire from the back of the controller is not corrected to the correct stop light switch wire. The red wire needs to connect to the cold side of the stop light switch that only...
view full answer... - Troubleshooting Trailer Brake Controller with No Signal on Black 12V Power WireTypically for brake controllers, the black wire provides 12V power from battery to the brake controller. Since you said there is no signal on the black wire going to the controller, this tells us that there is something wrong with the wire or circuit breaker and means the controller is not getting any power. If the controller has no power, then it cannot send a brake signal back to the trailer brakes. Since this wire comes directly from the battery, there should always be signal on the...
view full answer... - What Amperage Rating Circuit Breakers are Required for Tekonsha Primus IQ Brake ControllerThe Tekonsha Primus IQ part # TK90160 that you referenced requires a 20 amp breaker if the brake assemblies used are between 1 and 2 axles or a 30 amp if between 3 and 4 axles. For 20 amp we have the part # 9506P or for a 30 amp part # 38630.
view full answer... - Brake Controller Recommendation for Fleetwood Flair 2001For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. Brake controllers are not vehicle specific items so there are not diagrams available for individual vehicles. We do have a help page on installing...
view full answer... - Parts Needed To Install Draw-Tite I-Stop IQ In 2021 Toyota Highlander.I am happy to help! You are correct that your 2021 Toyota Highlander does not have a factory trailer brake controller port, so you will need to use Pigtail Wiring Harness with Diode for Tekonsha and Draw-Tite Brake Controllers # 7865. The Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional # TK90160 you mentioned is the exact same controller as the Draw-Tite I-Stop IQ and will require a 20 amp circuit breaker on the power wire for the controller. The # ETBC7 includes...
view full answer... - How to Install a Brake Controller in a 2007 Jeep Grand Cherokee Overland with 7-WayYour 2007 Jeep Grand Cherokee did not come with a factory brake controller install port under the dash of it. To install a brake controller on your 2007 Jeep Grand Cherokee with a factory 7-Way you will need to do some hard wiring. The wire Jeep provides is the electric brake output wire that goes back to the 7-Way trailer connector. This wire should be a light green wire that is behind the fuse box in the cab of the Jeep. It will connect to the blue wire on the brake controller. You...
view full answer... - What Size Fuse or Circuit Breaker Should be Used for Brake Controller on a 2006 Chevrolet SilveradoThe reason you would not want to install a 30 amp fuse or circuit breaker in a 4 brake magnet application, when installing a Prodigy P2 brake controller, # 90885, is that the extra amperage required to break the circuit could cause an issue with the wiring on the trailer or vehicle because it would take longer for the circuit to spike to 30 amps. In applications with 6 to 8 brake magnets or more, more amperage is required to activate the brakes properly so the time for the amperage spike...
view full answer... - How to Install Pilot Time-Delayed Brake Controller # 80550 for Use with Horse TrailerThe Pilot brake controller you referenced, part # 80550, installs in the tow vehicle. Depending on the vehicle involved there may be a quick-connect wiring adapter available, but if not the controller's 4 wires will connect as follows: The BLACK wire takes in 12V power from the tow vehicle battery's positive terminal through a circuit breaker. The value of the circuit breaker depends on how many trailer axles have brakes on them - use 20-amp # 9506P for 2- to 4-brake applications; use...
view full answer... - Brake Controller Wiring Installation in 1998 Chevrolet BlazerWe do not yet happen to have shot an installation video for a brake controller in your particular year, make and model truck, a 1998 Chevy Blazer. However, since you have already done the smart thing - testing with a circuit tester - you are just about there in terms of completing your installation. Vehicle makers often use the same color wire for specific functions but not always. Testing the wire with a circuit tester as you've done is the only foolproof way to find the correct connection...
view full answer... - Brake Controller Recommendation for 2014 Jeep Wrangler Unlimited That Has 7-Way ConnectorAmong the most popular and highly rated trailer brake controllers we offer is the Tekonsha Prodigy P2, part # 90885. This unit offers reliability, ease of use and the flexibility to be used with both electric and electric-over-hydraulic trailer brakes. Since it is a proportional-type controller (rather than a time-delayed type) it will help avoid excessive wear on your Wrangler's brakes. The linked article will explain further. There is no quick-connect harness to install this unit in...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Updated by:
Wilson B
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James C.
1/5/2018
Working great