Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hardware set allows you to mount Optronics license plate lights LP52CB or LP54CB.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. And today we're gonna take a real quick look at this hardware for mounting your Optronics License Plate Lights. Now this hardware set is going to allow you to mount your Optronics License Plate Lights, identified by the numbers that you see there on your screen. And also on your screen I am putting a photo with a diagram of the measurements that you might find helpful of each piece of this hardware set. I saw on the Q and As on this product page that we had several of our neighbors asking for those measurements. So for your convenience and for your reference I am including those measurements there on your screen.
You can also find this on the product page as well if you need to refer back to it for whatever reason. And this hardware set is directly from Optronics, so no worries about compatibility issues, or anything like that. So if you are needing the hardware set that will let you mount your Optronics License Plate Lights identified by the numbers that we saw previously, this is going to be exactly what you need. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (56 Customer Reviews)
Hardware set allows you to mount Optronics license plate lights LP52CB or LP54CB.
Was exactly what I was looking for. Keeps the standard way of mounting a license plate on my RV from gouging the gel coat
Fit perfect as replacement part on our Airstrem
Mounting hardware a little different from original hardware original hardware is a tiny of a fraction thicker and screw head wider than the ones I bought and the part that has a round bump does not line up with the original parts but all new mounting hardware still fit over all great product will recommend
perfect fit
Works perfect
My license plate hasn't fallen off yet so I suppose it's working great and deserves 5 stars. I also used some mounting tape on the bottom of my license plate to keep it from slapping against my trailer while driving. With the mounting tape and the purchased hardware I haven't had to think about my license plate for the last year which makes me happy!
The license plate hardware worked great. I definitely recommend and would purchased again. Thanks etrailer.
I was looking for some bits to replace the ones that were supposed to hold the license plate to the bracket on my Bunkhouse camper recently purchased from Bushtec. I didn't have a plate to put on when I picked it up and didn't think to check the hardware. By the time I had pulled it home behind my bike, the plate mounting hardware was gone. I contacted Bushtec to see if they would send new ones. After 3 weeks, I went online and found this set for cheap. I ordered 2 sets, just in case. Good call as the supplied screws were a tad long. The extra wahers from the second set corrected that issue. That and a little blue Loctite and torqued to 'good n tight' and I anticipate no issues. It was not easy finding these bits, but happy I did. If they made the screws about 2 threads shorter, they'd be perfect for my application. I was told they were out of stock and would be back ordered. Still got them in a week. Excellent.
Ron M.
Exactly what I needed to attach plate... that should come with trailer but Grand Design sent me 200 sheet metal screws and dealer told me to use zip ties for...
Perfect license plate fasteners for my Airstream trailer. They allow license plate attachment without any hardware touching the aluminum skin.
I was not able to find exactly what I needed until I ran across etrailer. I order these and they fit perfect. The slim, thin nuts fit perfectly behind the tag mount, fitting flush and not coming in contact with the body of my camper. I'm very happy with these tag mounting screws.
I WAS HAPPY TO FIND THIS PRODUCT AT ETRAILER.COM. NO ONE ELSE HAD IT AS FAR AS I KNEW. NOW I CAN ATTACH MY LICENSE PLATE TO MY NEW TRAILER! GOOD CUSTOMER SERVICE TOO-THANKS Katie D. ITEM: LP52HP ARE FASTENERS FOR MY SPECIAL LICENSE PLATE HOLDER LP51 SERIES.
This was the wrong mounting hardware and I had to get other hardware to mount the License plate light. I called after receipt and was given credit for it.
This is the plate mounting hardware that everyone seems to forget is needed when flush-mounting a LP20SB or LPL55CB license plate bracket! The nuts are captive so all you do is screw on the license plate from the outside. Screws are short so you don't poke the trailer wall.
Etrailer is the best ! Great products , service and best of all the people knowledgeable , helpful and professional .
Keystone was too cheap to include license plate mounting screws and nuts. Had to use tie straps until these arrived and now all is perfect. Thanks Jim
Fit the style of the license plate mounting frame I had on my trailer. Worked perfect.
This is the only setup which allows you to remove a license plate without damaging the plastic holder.
The inserts however are hard to keep in place while you screw the screw in.
Great service! Straight forward.etrailer certainly the best place to look for RV parts.
Wow these are great license plate screws. I make left and right hand turns and when I park the plate is still there.
Had not seen these Fasteners before but they work great for attaching a license plate to trailer. Quick delivery too.
pointless in getting it
normal screws will ground the light
Worked great for a removable cord on a removable tongue i built on a trailer
Etrailer is the best! They always have the parts I need at a great price.
Fits perfectly
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ron M.
11/25/2017
Great! Have not lost the plate!