1/4" Air Line Hose for Roadmaster BrakeMaster Flat Tow Brake Systems - Per Foot

See what our Experts say about this Roadmaster Accessories and Parts

• How Many Feet of Air Line Hose is Included with Roadmaster Brakemaster Supplemental Braking System
  I went out to the warehouse and took a look inside a BrakeMaster kit # RM-9060. I pulled out the 1/4 inch hose, # RM450700, and measured it. Included in the kit is approximately 50 feet of that hose. If additional hose is needed # RM450700 is sold in increments of 1 foot.
  view full answer...
• What Size Air Line Does the Replacement Brass Insert RM-450735 Fit
  Yes, 1/4 inch air line like part # RM450700 would fit over the fitting part # RM-450735 that you referenced.
  view full answer...
• Is the High Pressure Air Hose Available for the Roadmaster BrakeMaster RM-9100
  Yes, we do offer the replacement 1/4 inch air line for the BrakeMaster systems, part # RM450700, by the foot. This would be the same line included in the # RM-98100 RoadMaster second vehicle Kit for BrakeMaster systems.
  view full answer...
• Replacement Air Line Hose For Roadmaster BrakeMaster Supplemental Braking System
  You can obtain the replacement air line right here for your Roadmaster BrakeMaster Braking System # RM-9060. The air line hose is sold by the foot so you can get the exact amount you want, with the correct part number being the following: - Air Line Hose 1/4" for BrakeMaster Systems # RM450700
  view full answer...
• What Size Air Line is the Roadmaster Quick Disconnect Kit Designed to Work With
  The air line size that the part # RM-921004-80 is designed to be used with is 1/4 inch like part # RM450700. The inserts do come with this kit and you can see them in the main product picture. I also attached a picture that shows how the line attaches to the fittings using the inserts.
  view full answer...
  
• Connection Fittings for Roadmaster Airline RM450700
  The ferrule fitting for use with the air line part # RM450700 are the part # RM-450740. Or if you are looking for the quick disconnect fittings you would want the part # # RM-921004-80.
  view full answer...
  
• Additional Air Line Needed for the Roadmaster Brakemaster Braking System
  The air line assembly for the Roadmaster BrakeMaster, # RM-921004, is 76 inches long. This cord is only 12 inches shorter than the 88 inch cord # RM-921004-88. I spoke with my contact at Roadmaster and he told me that these are the only two preassembled lengths that they offer. Instead, I recommend purchasing the correct length of air line hose, # RM450700, and the Quick Disconnect Kit, # RM-921004-80. The air line hose is sold by the foot, so for 36 inches, you will want to order a quantity...
  view full answer...
• Air Line Replacement for Roadmaster Brakemaster
  Roadmaster actually offers the 1/4 inch air line for the Roadmaster BrakeMaster System # RM-9160 with the part # RM450700 which is sold by the foot. This would be what i recommend as it's what has been tested and used with this system. The # AL73RV should work, but I'd go with the Roadmaster option.
  view full answer...
• Parts Needed to Install Brakemaster On RV When Tow Vehicle is Already Set Up
  For the BrakeMaster parts for the RV side of your setup you will need a car to RV air line assembly, # RM-921004-88. I also recommend the quick disconnect kit, RV side, # RM-921004-60. And you will need some air line, # RM450700, sold by the foot. Inside the RV you will need kit # RM-98850.
  view full answer...
• Electric Trailer Brake Controller For a 2018 International LT 625 With Air Brakes
  You are going to want to use the Hayes Air Actuated Trailer Brake Controller # HA100400C on your 2018 International LT625. With this brake controller it will tie into your existing air lines for your brakes and use the pressure in the air lines to proportionally match the braking force applied to the electric trailer brakes. The only connections you will need to make are for the Air Line # RM450700, and electrical connections. The white wire from the Hayes controller will go to a 12 volt...
  view full answer...
• Recommended Air Brake Controller Compatible With Electric Over Hydraulic Brake Actuator
  We have exactly what you need. You will want the Hayes Air Actuated Trailer Brake Controller - 1 to 4 Axles - Proportional # HA100400C which is the only Air to Electric brake controller we carry that is compatible with electric over hydraulic brake actuators. For this installation I also recommend the Power Wire Kit for Electric Trailer Brake Controllers - 12 Gauge # BRK-ELECKIT and the Air Line Hose 1/4" # RM450700 sold by the foot. The similar Warner Air Utility Brake Control # 1300-80...
  view full answer...
  
• Air Line Connection for Hayes Air Actuated Trailer Brake Controller HA100400C
  The Hayes Air Actuated Trailer Brake Controller # HA100400C will connect to your RV's air brakes by installing 3/16 or 1/4-inch diameter S.A.E. approved tubing like # RM450700 between the brake controller and the vehicle service line. For brake systems with primary and secondary service lines you'll connect to the existing two-way check valve between the two service lines and install the tubing from the output side of the check valve to the brake controller. The two-way check valve should...
  view full answer...
  
• Replacement BrakeMaster Parts, RV Side for Roadmaster BrakeMaster Supplemental Braking System
  For the BrakeMaster you will need a car to RV air line assembly, # RM-921004-88. I also recommend the quick disconnect kit, RV side, # RM-921004-60. And you will need some air line, # RM450700, sold by the foot. Inside the RV you will need kit # RM-98850. Dealing with air brake systems can be difficult but not impossible. I will email you a copy of the instructions for BrakeMaster # RM-9100. Current pricing is available on each of the product pages.
  view full answer...
• Parts Needed For Installing an Electric Trailer Brake Controller On an International ProStar
  I recommend using the Hayes Air Actuated Trailer Brake Controller # HA100400C as your International ProStar will use air brakes. This will allow you to be able to proportionally control the electric brakes on your trailer. You will tie into your air brakes with Air Line # RM450700 sold per foot and then you will wire the controller to a 12 volt battery positive and negative. Then you only need to run a Brake Wire # 10-1-1 also per foot to the 7-Way Trailer Connector # HM47210. You will...
  view full answer...
  
• Brake Controller for Towing Fifth Wheel Toy Hauler with 2013 International Trans Tar 8600 Air Brakes
  We have two brake controllers that work well with air brake systems. I recommend the Hayes Air Actuated Trailer Brake Controller - 1 to 4 Axles - Proportional # HA100400C. This system offers both manual override and proportional braking giving your trailer brakes the same intensity as your truck. I've attached a video review to assist. If you feel comfortable working with air systems, then you can absolutely do it yourself. If you are not comfortable with that, I recommend having a...
  view full answer...
• How To Tow Trailer W/ 7-way Blade Connector With 2013 Freightliner 122SD W/ 7-pin Round Connector
  I would be happy to help you make a wiring adapter to allow you to connect your 2013 Freightliner 122SD with a 7 pin round connector to your 2020 EZ4 triple axle trailer. First you will need a female 7-pin round # PK11720 and female 7-way blade # PK12-707E. Since the 7-pin round has separate brake and turn signals but a 7-way blade has combined you will need the the 3-wire to 2-wire converter # HM48847 like you mentioned. This will get connected to 7-way connector as follows: Red wire...
  view full answer...
  

Do you have a question about this Accessories and Part?