Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
(99 reviews)
Price: $36.86
In Stock
Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
Item # DL24242
Retail:$40.02
Our Price: $36.86
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (99)
- Q & A (0)
- Videos (3)
- Photos
Dutton-Lainson Accessories and Parts - DL24242
- Trailer Winch
- Cables and Straps
- Straps
- Dutton-Lainson
- 2 Inch Wide
- 2600 lbs
- 20 Feet Long
20' Long hand winch strap and hook.
Features:
- 2" Wide x 20' long heavy-duty winch strap with hook (strap color may vary betwen black, brown, and gray)
- Breaking strength of 4,000 lbs
- For winches with a capacity up to 2,600 lbs (strap rating must be 150 percent of winch rating)
- Includes mounting hardware
- Made in the USA
24240 Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
Video of Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dutton Lainson Winch Strap With Hook Review
Zach: Hey everybody, Zach here at Etrailer.com. Today we're looking at a winch replacement strap from Dutton-Lanson, this is going to be a really nice way to replace an old, worn out or damaged strap. This is intended to help get your boat back on your trailer at the ramp, but also to keep it secured when you use it with all your other straps for your trailer.Now, this is going to be a direct replacement for Dutton-Lanson winches, but you can see here, I have it on a Fulton winch, so as long as it fits that two inch diameter in there, this is going to be ideal for swapping out, regardless of those brands. Now, if you're looking for a strap of different sizes, this one is going to come in a 12 or 15-foot like I have here today, but also a 20 foot. Can see the two inch wide strap there, it's constructed of pretty good material, it feels a lot like a seatbelt. It's going to be right in line with that standard winch strap that most are going to come with.And down here at this hook here where our bow eye is connected, it's just going to be a standard hook, there's nothing fancy about it.
I do feel like the gate on that is a little stiff, so if you don't have a lot of room to work down there, it might be a little tough, but it's not too difficult. Then the strap has doubled- back on itself, has good stitching there, so this is going to be really good quality there. I'll get that put back in place.Now, when it comes to the links of the 12, 15 and 20-foot, they all have the safe working load limit of 1700 pounds. Now that's really good for this boat here. The working load limit when you have a boat winch strapped, that's not pulling...
Let's say the boat weighs 2000 pounds, now it's better to stay under, but that's not a dry weight that you're pulling with that boat, so this is not intended to use outside of the water when your boat is on there. And when it comes to security in it, it's not the only strap, so you have those Gunwale tie-downs with the Transom tie-downs and you have some other ones, all of those together are going to keep your boat secure.But if you do have something that's significantly heavier, you do want to make sure that you're getting proper straps for that. We have a lot of different options out there, getting up into even the 8,000-pound working load limit, so whatever boat size you have, we have a tie-down for you. Overall, it's really smooth operating, there's nothing that stands out. I think it's a really...
Just a standard winch strap, it's going to do a good job of replacing it. It's not very difficult to swap these out, so let's just walk you through how we got this one put in place.First thing we need to do is remove our old strap, we'll get this extended out all the way. And depending on the style of winch that you have, you're either going to have a bolt with a nut on it that you can remove, or this Fulton one we have here, you just kind of push it back up through the center section. So I'll just push it up through there, and then it has this pin that keeps itself in place, so we'll remove that and then we'll pull this old strap out. Now, there is nothing wrong with this strap, it's in really good condition, we're just demonstrating today how easy it is to swap these out, so I'm going to set this one aside and grab our new strap.Now we, can take this loop in and we're going to feed it through the backside of our winch there.
So as we feed that through there, this is where you can attach that bolt if you have that style of winch but our pin is in good condition, so I'm just going to insert it into the loop and get it fed back in there, you can see that holds itself in place. And then we can just start bringing this back to together.When we get close, we can get that hooked into our bow hook, that gets us nice and tight. All we'd need to do is just pop the lid back on our winch and we're ready to go. You can see it didn't take too much effort to get that swapped out, we have a new, nice, clean working winch strap, but that's going to do it for our look at the Dutton-Lanson winch strap replacement..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. - DL24242
Average Customer Rating: 4.8 out of 5 stars (99 Customer Reviews)
20' Long hand winch strap and hook.by: Mark 03/18/2024
After ordering similar strap from other vendor that had hook to large for my boats bow eye, ordered from ETrailer, very happy the hook is a perfect fit and replacement for my ezloader trailer.
by: Finn J.07/20/2016
Received the strap last evening and, after shortening the included bolt to fit my particular winch, installed by nightfall. Easy to order from etrailer.com, with solid follow up communication via email. Thank you!
by: Tony A. 10/14/2017
Strap worked well with the winch I purchased. Loaded a 1450 lb Viking side by side on a tilt trailer worked great just need to make sure you line the attachment point up with the winch. The winch area where strap wraps & the strap are close to the same size if you don't line them up the strap will start rolling up the side.
by: Daniel 09/13/2023
put on my 2017 malibu 21VLX trailer. works perfect. very happy with whole transaction
by: Michael 03/30/2024
Fast delivery
by: Leon09/15/2023
Excellent service,fair prices.
by: John 08/27/2023
Good value and good quality - unfortunately neither of the bolts supplied with the strap were long enough.
by: Terry09/02/2023
The hook is smaller then I thought.
by: Michael08/29/2019
Installed my new strap today and it works perfect. If you ever have questions about the fit for your winch, give etrailer Customer service a call. They are great to work with. Kaylyn did a great job for me. Thanks!
Michael
8/30/2020
All good so far
by: Mike07/21/2015
1st, etrailer.com is an excellent company with fantastic customer service.
The strap is very nice. It comes with a couple of carriage bolts different lengths but depending on the winch, you may need to source a better fitting bolt (length, width and shoulder or thread length). The included bolt worked well with the DL11004 worm gear winch but I did have about 1/2 inch of thread in the spool/strap area.
Al in all, I am satisfied.
by: Brian11/26/2018
The selectin and ordering process was a breeze, the items were described clearly. My order (included various items) was shipped and received very quickly. The winch strap was a direct replacement with only one minor issue, the kit comes with two different length bolts, and both of them were too long to clear the inside of my winch frame, I had to source my own shorter bolt to get the job done.
by: Robert M.08/07/2017
Ordered a boat trailer winch and some tie down straps. Loved the product videos showing real life operations of the winches. Helped narrow down my choice. Ordered on a Tuesday and had it on Thursday. Just in time for the weekend. Awesome.
by: Blake 07/04/2020
The strap was shipped and arrived promptly. Great quality from a Great company! Thanks etrailer!
Blake
7/5/2021
I purchased the strap a year ago and it is still working great and still looks new!
by: William 05/27/2023
Always great products, in stock and fast shipping!!!
by: Edward 03/22/2020
Strap is high quality and it's made in USA not a Chinese knockoff
Edward
3/23/2021
Strap is holding up good main reason straps fail is sunlight keep your winch strap covered and it will last longer
by: Dean06/27/2018
Strap was a good replacement for the original boat winch strap.
by: Rick09/29/2018
The strap looks great. I should have purchased a 3 inch vs 2 inch. I have not used the winch yet, so I still cannot give a valid review. My rating is for service and follow up by retailer.
by: Steve S.07/15/2016
eTrailer Rocks!!! I received my winch strap and boat buddy on time. The order process is very easy. eTrailer is the place to purchase replacement parts!
by: James07/15/2019
Another quality product shipped super fast to my doorstep. This will keep my boat winch going for years to come.
by: Chad 08/01/2021
Solid American made winch strap and hook. I feel much better buying this compared to a cheap knockoff. Thanks!
by: James11/02/2018
Perfect replacement for the winch strap.
by: Guerry D07/06/2017
It's what I expected for winching my boat up on its trailer. What else can I say about a strap.
by: Jim 04/15/2021
Works great...used with winch that accepts battery drill. Makes for a great combination !
by: Richard07/30/2020
The bow stop and winch strap is exactly what I wanted and fit perfectly. The quality of these items is excellent.
by: Fredrick Krantz06/30/2022
Application perfect match for purpose
25
99
Show More Reviews
See what our Experts say about this Dutton-Lainson Accessories and Parts
- Worm Gear Winch for Car Hauler TrailerThe type of manual winch I suggest for your car trailer is a worm gear type which prevents the car from rolling backwards even if you let go of the handle. Winch capacity for your application with a rolling load on an incline does not need be very high. As an example, a 2500-lb rolling load on a 10% incline requires only a 500-lb-rated winch. Please refer to the linked article. The Dutton-Lainson 2K Worm Gear Hand Winch # DL11004 can be operated either by the included handle or with the...
view full answer... - Worm Gear Hand Winch and Strap to Lift a 50 lb Rooftop Carrier Off of a 2012 Honda AccordThe Dutton-Lainson Worm Gear Hand Winch, # DL10950, cannot be used with a nylon strap. This is a cable only application that would work well to raise and lower your 50 lb rooftop carrier if your set up allows use of a cable If your set up requires a strap, you could use the Dutton-Lainson WG2000 Worm Gear Hand Winch, # DL11002. This is the only worm gear hand winch we offer that will accept a strap and it has a rated capacity of 2,000 lbs. This winch requires a 2 inch wide strap like...
view full answer... - Hand Winch Compatible with a Powered Drill For Lifting and Lowering a Gate The Dutton-Lainson Heavy Duty Brake Winch part # DL10808 has a braking mechanism that locks in place when the handle is released. In order to obtain a ratcheting mechanism with this winch you will want to replace the handle with the Brake Winch Ratcheting Replacement part # DL70346. When used in place of the regular handle, it allows the operator to both raise and lower the load without turning the handle a full revolution. As long as your gate does not exceed 1,200 lbs, this winch will...
view full answer... - Available Replacement Parts for JIF Marine 3200-lb Hand WinchThe only replacement part available for the Jif 2-Speed Boat Trailer Winch # 315-W3200D is the Hand Winch Strap with Safety Hook # DL24242.
view full answer... - Recommended Winch for a 1986 ski Nautique 2001 Boat and DHL Trailer For your 1986 ski Nautique 2001, I recommend the Dutton-Lainson Hand Winch item # DL15440. It looks like your boat weighs 2,400 lbs dry and is almost 19' long so this 2-speed 3,200 lbs winch would work perfect. I'm not sure if you're using carpeted bunks or roller bunks but the item # DL15440 has plenty of capacity to work with both. You'll also need the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. item # DL24242. We do not have a complete rubber bumper assembly....
view full answer... - Replacement Clevis Hook Clasp for Fulton T1801The Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.# DL24242 is needed because the strap is sewn around the hook. If you have a chain or wanted to add a small portion or chain to your hook then you can use the Titan Chain Clevis Hook w/ Spring Loaded Latch for Chain w/ 5/16" Thick Links - 4,700 lbs # TCSLIP-G70-8-L.
view full answer...
- Dutton-Lainson Trailer Winch - DL11004 Strap Length RecommendationI spoke with my contact at Dutton Lainson and the max length (and recommended length) strap to use with the Dutton-Lainson Worm Gear Hand Winch # DL11004 is 20 feet like the # DL24242.
view full answer... - Which Straps Work with Dutton-Lainson 1200 Pound Brake Winch DL14934You can use several different straps with Dutton-Lainson winch # DL14934. You will need a strap that is 2 inches wide and up to 31 feet long. You can use: # DL24249 at 25 feet long # DL24251 at 20 feet long # DL24242 also at 20 feet long # DL6148 at 15 feet long # DL24239 at 15 feet long # DL24260 at 20 feet long
view full answer... - Recommended Game Feeder WinchFor a new game feeder winch I recommend the Fulton Single Speed Trailer Winch # F142201 along with Hand Winch Strap # DL24242. The Fulton winch has a 1,500 lb capacity, 4.1:1 gear ratio and 2-way ratchet system. I've added a link to a video review of the winch for you to take a look at as well.
view full answer...
- Can The Dutton-Lainson DL11004 Winch Use A 25 Foot Long Strap?We are a little limited on what we have for worm gear winches, but if your application does not require the strap to be completely wound and can have 5 feet of excess hanging down/out, you can use the 25 foot strap # DL24249 with the Dutton-Lainson # DL11004. If you cannot, you will only be able to use the 20 foot # DL24242. The only other hex drive winch we have with the worm gear will be the Dutton-Lainson # DL11011 that is designed to be used with wire rope. The 1/4" Diameter with Safety...
view full answer... - Hook Opening Size of the Dutton Lainson Winch Strap # DL24242The hook opening size of the Dutton Lainson Winch Strap part # DL24242 is 1-1/16 inch wide.
view full answer... - Hand Winch for Use with Lightweight LoadsIn cases where the weight of the load on the winch is too low to properly engage the winch brake you can use a worm gear winch instead. This type of winch uses a screw mechanism to operate the load. The weight of the load cannot cause the winch to reverse direction so no brake mechanism is needed at all. The linked page displays our range of worm gear winches. You have a choice of poly strap or wire rope models, but for a marine environment I suggest the strap type, either part # DL11004...
view full answer... - Can Winch Strap Be Used On Dutton-Lainson Worm Gear Hand Winch # DL11011The Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle # DL11011 referenced in your question is designed specifically for use with a cable like # DL24100. A strap cannot be used with this particular model winch. For a similar style, worm gear hand winch that is designed to be used with a strap, I recommend the Dutton Lainson # DL11002. This has a slightly larger capacity of 2,000 pounds when compared to the model you were looking at and can be used with the winch strap # DL24242....
view full answer... - Does Dutton Lainson Worm Gear Winch DL11004 Fit 2 inch by 20 foot StrapYes the Dutton Lainson Worm Gear Winch part # DL11004 will allow a 20 inch long by 2 inch wide winch strap like the # DL24242 to fully roll up on to the spool of the winch.
view full answer... - Recommended Brake Winch For Boat Trailer To Pull 3500lb BoatYou may be able to use the Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs # DL11004 you were looking at to load your 3500lb boat on your boat trailer, but it will come down to how long the winch distance is, and if your trailer has carpeted bunks or roller bunks. The standard rule of the thumb is 2-to-1 boat to winch ratio which would mean the # DL11004 would work up with up to a 4000lb boat. If you have roller bunks and are winching a short distance then the winch would...
view full answer... - Does The Buyers Products Trailer Hand Winch Have A Ratchet Function.Yes, the Buyers Products Trailer Hand Winch - 800 lbs # 337HW800S has a ratchet and free spool function. The linked video will display how it operates. I do however recommend looking at the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,100 lbs # DL15103. They are better built and will last long. It does not come with a strap though and you will need to get one if you wish to go with this product. The two I prefer are the Winch Strap with Hook - 2" x 15' - 2,600 lbs #...
view full answer... - Replacement 2 inch Wide and 20 Foot Long Winch Strap Used with 4000 lb BoatWe have the Dutton Lainson winch strap part # DL24242 which is 20 feet long, 2 inches wide and has a weight capacity of 4,000 lbs.
view full answer... - Hand Winch With Cable That Can be Replaced With StrapA strap is not able to replace the cable for that jack, so if you wanted a worm gear hand winch and strap, you would need an option from Dutton-Lainson: - Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs # DL11004 - Hand Winch Strap with Safety Hook # DL24242
view full answer... - Dutton Lainson Winch Handle Replacement for Dutton Lainson DL200AThe replacement handle for the Dutton Lainson DL200A is the part # DL70336 which is pretty easy to install. If you need a strap, I recommend the Dutton-Lainson Hand Winch Strap, # DL24242. This is also easy to install.
view full answer... - Picking Out Winch for 3,100 lb Boat on Trailer with Wood BunksWith wooden bunks on a boat trailer the ratio of winch capacity to boat is right at 2:1 so you could get away with a winch that has around a 1,500 capacity. But a 1,800 lb winch would be easier to winch in and out like the Single-Speed Boat Trailer Winch with 20' Strap - 1,800 lbs # 315-W1800D. This is a very easy to use winch that would work really well for your application.
view full answer... - Is a Worm Gear Winch a Good Choice for a Flat Bed TrailerYou can use Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle - 2,000 lbs Item # DL11004 for your utility trailer. If you do I strongly recommend using a drill to reel in the line or let it out (worm gear winches do not have a free-spool mode) because otherwise it will move very, very slow using the crank handle. If the winch is to be mounted directly to the floor of your flat bed trailer then I do recommend a top-winding winch so you have more space to operate either the handle...
view full answer... - Strap Recommendation for Dutton Lainson 2k Trailer Hand WinchThe recommended strap for Dutton Lainson winch # DL14725 is a 25 foot long, 4,000 pound capacity strap, # DL24249. For a 20 foot strap with 4,000 pound capacity use # DL24242. You always want the strap to be at least 150 percent of the winch capacity for safety.
view full answer... - Availability Of Dutton-Lainson DLB800A Brake Winch And 7" Removeable Handle KitI would be happy to help! You are looking for the following Dutton-Lainson parts: Dutton-Lainson Hand Winch w/ Automatic Brake - Zinc TUFFPLATE Finish - 800 lbs # DL64FR Dutton-Lainson Hand Winch w/ Automatic Brake - Zinc TUFFPLATE Finish - Left Side Handle - 800 lbs # DL74FR Replacement Removable Handle Kit for Dutton-Lainson DLB-Series Brake Winches - 7" Long # DL84FR While we don't currently have the 2600lb winch strap, we do have the Hand Winch Strap with Safety Hook, 2" Wide x...
view full answer... - Manual Winch Recommendation for Landscape TrailerFor your manual crank winch to load your mower I recommend the Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs # DL11004 which will allow you to use a 5/8 inch socket with a drill attachment or the included socket-head handle. I recommend using the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. # DL24242 with this winch. If you prefer a sidewind option I recommend the Dutton-Lainson Hand Winch w/ Automatic Brake # DL15721. I've attached some videos to...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Jacob T
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Matthew S
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Finn J.
7/20/2017
One year later, its still working like a charm.