Leveling Scissor Jack - 24" Lift - 5,000 lbs
(415 reviews)
Price: $57.94
In Stock
Leveling Scissor Jack - 24" Lift - 5,000 lbs
Item # JSC-24-IND
Retail:$75.08
Our Price: $57.94
You Save: 23%
In Stock
- All Info
- Reviews (415)
- Q & A (0)
- Videos (3)
- Photos
Stromberg Carlson Camper Jacks - JSC-24-IND
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Scissor Jack
- 4001 - 5000 lbs
- 1 Jack
- 24 Inch Lift
- Stromberg Carlson
- Bolt-On
- Weld-On
- Steel
This leveling scissor jack with a 5,000-lb capacity will keep your RV level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.
Features:
- Raises, lowers and stabilizes camper
- Remains steady on soft surfaces because of wide bow-tie base
- Bolts or welds on
- Includes 1 steel jack
- Requires crank handle (sold separately - JCH-1)
Specs:
- Capacity: 5,000 lbs
- Extended height: 24"
- Retracted (collapsed) height: 4"
- 1-Year limited warranty
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
JSC-24-IND Stromberg Carlson Scissor Jack - 24" - One Jack
California residents: click here
Video of Leveling Scissor Jack - 24" Lift - 5,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Leveling Scissor Jack Review
Speaker 1: Today you'll be getting a look at and seeing how to install the Stromberg Carlson Leveling Scissor Jack Set, with a quantity of two, part number JSC-24. They're also available in a quantity of one, with part number JSC-24-IND.You can bet on this pair of jacks. These scissor jacks from Stromberg Carlson are great for stabilizing and leveling your camper. As you can see, if your trailer is out of level, you can use your scissor jacks to level it. Check it out. Much better.
As you can see, without your scissor jacks engaged, there's a lot of movement in your trailer. With your scissor jacks engaged, all that extra movement is gone. They're adjustable between four and 24 inches and they have a 5000 pound weight capacity per jack. You can easily raise and lower them with the included crank handle. It's going to work out great on most surfaces.
As you can see, we're on concrete here. The bow-tie base is going to keep it steady even on soft surfaces.They're a bolt-on or weld-on installation. We'll go ahead and show you how to bolt them on now. Here you can see our old rusted out stabilizer jack. It's bent.
We're going to be replacing it. I've gone ahead and removed the old stabilizer. Let's bring in our new one. With our new one, you can see it's got multiple mounting locations. It's completely universal.
Now, you may or not be able to use your same mounting holes and locations. What you need to do is hold it up and figure out where it's going to work best. Now, once you've found a good location to install your stabilizer jack, you want to be sure that you can still easily access your drive nut, which is going to raise and lower your stabilizer jack.You'll want to raise your jack up to where it's making contact with your frame where you want to install it. Then you can mark your holes. Now, there are six holes on each side. I'm only going to be using four total, two on each side. You can use whichever holes work out best for you. Once you've got your holes marked, go ahead and move the jack out of the way, and then you can begin drilling out your holes. I'm going to be drilling out quarter-inch holes. If you'd like to, you can use a pilot bit and then drill out your final size. All right. With all those drilled out, you can go ahead and install your stabilizer jack. You will have to provide your own hardware.I'm just using some quarter-inch bolts with some flat washers and lock nuts. Now you can bring your jack back in and align your holes. Now you'll just loosely install all your hardware. Now we can tighten up our hardware. Now you can raise up your jack and it's ready for when you need it. That's going to complete your look at the Stromberg Carlson Leveling Scissor Jack set.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Alternate product found
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Leveling Scissor Jack - 24" Lift - 5,000 lbs - JSC-24-IND
Average Customer Rating: 4.8 out of 5 stars (415 Customer Reviews)
This leveling scissor jack with a 5,000-lb capacity will keep your RV level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.by: Margaret 03/11/2024
Much better jack than the one that came with the tow trailer. This 70 year old woman had no difficulties installing it. One year later still works great!
by: Mike 08/30/2023
leveling jack was delivered very promptly and in good shape. installed on my 5th wheel easily and works fine. a bit lighter duty than the OEM jack but darn good value for the price and will get the job done. etrailer is the best!
by: Jeffrey L.09/28/2015
Very happy with the quality and craftsmanship of this jack. I was confident in its durability and ability to do the job from the moment I opened the box. Installation was a snap, using self-tapping #14 bolts (not supplied), and my leveling blocks made it easy for one person to install. Once installed, the combination of the four jacks, the double axle, and the tongue jack all gave my 25' 4500 lb trailer a very stable feel. I would highly recommend this jack to anyone looking to replace the cheaper stabilizers that usually come with new travel trailers.
by: Stan09/01/2022
Excellent product I used to replace my damaged level for my 26 ft pull behind! It’s smoothe operation works with my cordless drill And the bolt holes lined up to my old one from KZ Connect! I had to return 2 that I tried from [online] because they were frozen closed when I received them. They also did not have the bearing between the main bolt head and scissor frame! Comforting to see a design made for the user and not the seller!
by: Don11/18/2013
The stabilizer jack was a perfect fit for replacing the original that I broke on my travel trailer. 4 self tap metal screws from the original installation was all that was required to install.
by: Toby 02/26/2024
Better quality than the one I replaced!
Delivered on time.
Easy to install.
by: Kelly04/08/2018
Great product for the price. Arrived with no issues. However both sides of the mounting bracket weren't level/flat. I had to put it in my vise to straighten it out to be able to weld them both. No biggie for my speed shop but for someone who might not have the means or capability, it might be an issue.
by: Gregory07/08/2020
Solid jack, good workmanship, although head on bolt is metric. While not a deal breaker, I wish this had been identified in spec, since its non standard size requires me to use a different size socket.
by: Jeremy 04/27/2023
Ordering was easy and delivery was way faster than expected! The Jacks are well made and I am very pleased with my whole experience. I will be recommending etrailer.com to my family and friends!
by: James 10/31/2023
Just what I ordered
by: David 08/24/2023
You shipped faster than I thought. Great service.
by: Roy Y.09/11/2018
One of the jacks on my Sunline camper (trailer) was bent while moving the trailer across uneven ground. I bought the scissor jack to replace it about a year ago. It is constructed with heavy enough materials to do the job of keeping the camper firm. I don’t like it when the camper rocks and rolls when you step into it! It was fairly simple to install. Of course, because it is new it cranks up and down smoothly. Hopefully I won’t need to buy another but I’ll buy one like it if I ever bend another one.
by: Ronald 06/29/2023
Very nice works really good. Bolts rite up
by: Dennis 05/11/2023
They work very well. Made a big difference in the ones that came with our camper.
by: George A06/13/2019
This jack is exactly what I needed to replace a broken jack on my travel trailer. I installed the jack using existing holes in the frame of the trailer. The jack is sturdy and well designed; it is easy to lower and raise using a crank.
by: Dale B11/02/2020
I always use etrailer.com. Boat jet ski enclosed utility trailer and camper. They always have the parts you need at a great price. If you do it yourself it’s a must to shop etrailer. Most recent purchase was delayed due to COVID. They promptly contacted me about the shipping delay and offered another part that could be shipped sooner. No one does this!! I was not in a rush to get the part I ordered so I patiently waited for delivery. I could not be happier with the service and selection from etrailer.com
by: Tony A.05/12/2015
The stabilizers were very easy to install. After installation, I set the camper up and the stabilizers worked very well. Once inside, the camper felt sturdy, moreso than with the jacks and blocks of wood we used previously. It would have been nice had the bolts, lock nuts, and the tool used to raise and lower the stabilizer been included. Other than that, I am very satisfied with the purchase. It was a good price for this item.
by: Cowboy Joe08/06/2020
I was looking for a replacement jack for my trailer. I wanted to be able to match bolt holes, etc. for an easy exchange. This Jack fit in just fine with minor adjustments. It has worked fine this summer.
by: William B.05/11/2014
I have purchased two scissor jacks from etrailer. The first one I inadvertently crunched shortly after I installed it. Completely my fault. This should go to show that I was satisfied enough with the first one to buy the exact same jack from the same company.
by: Andrew 01/27/2022
Really easy to install, this leveling jack was a great replacement for the original equipment which had rusted badly. One year later still looks and performs great.
by: James 06/22/2020
I did not know that Levelers were larger than the one on my 2019 Forest River FSX 167rb. So I had to drill 4 holes for the 2 Levelers but it worked out. My mistake was that I did not read to see that it was not designed to lift the tires off the ground but to level the trailer. Aside from that you have been very helpful in answering questions that I have asked and the only parts distributor that I have dealt with. I will do business with you again.
Thanks for your support and be well
Jim Hayes
by: David V.11/30/2019
Better than the stock one it replaced. Smooth lifting action with only a little bit of corrosion on the drive nut after a year but I live on the coast and everything ends up rusting out here eventually. I would suggest a light spray of dry-lube every few months on the hinges to keep things moving nicely. All in all a very good product that took less than 10 minutes to install.
by: John E.12/22/2014
I bought new scissor jacks from etarailer to replace the damaged lighter weight, original ones that had been on my RV..I haven't installed the new ones yet, but they look to be even better than I had hoped for...Very heavy duty, and well built..Originally, I was going to attempt to rebuild the old ones, but after the new ones from etrailer arrived, I was really glad that I didn't bother to try rebuilding the old ones..I'm sure that the new ones will work great..
by: Duane05/29/2018
We bought these jacks to use under our non-functioning auto leveling jack system on our rv. They did the job.
25
415
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Are Replacement Parts For Scissor Jack AvailableI spoke with my contact at Stromberg Carlson about replacement parts for the scissor jacks we offer like part # JSC-24-IND, and they told me they do not offer any replacement parts. I recommend replacing your current jack with the # JSC-24-IND. This is a 5,000 lb leveling jack that has measures 4 inches when retracted and 24 inches when extended. The required crank handle can be ordered separately and that part number is # JCH-1. If you choose to use a power drill to raise and lower...
view full answer... - Mounting Dimensions for Stromberg-Carlson Leveling Scissor Jack # JSC-24-INDThe manufacturer does not have a schematic for the Stromberg Scissor Jack # JSC-24-IND, so I went to the warehouse and pulled one and came up with the following dimensions which I have noted in the attached picture.
view full answer...
- Can Trailer Scissor Jacks Be Installed on Front of Jayco Travel TrailerIn regards to trailer scissor jacks like Leveling Scissor Jack # JSC-24-IND, these simply need to be bolted to the frame either at the front or the rear. I don't have installation advice on these for any one specific trailer but so long as you don't have anything else on the frame that would be in the way of these jack there should be no issues with mounting. I have attached a review video for you which goes over the installation in more detail.
view full answer... - Spacing of Mounting Bracket Bolts on Stromberg Carlson Trailer Leveling Scissor Jack # JSC-24-INDI am very pleased to report that based on pulling one of these jacks from stock and measuring the center-to-center spacing of the bolts that hold the jack to the mounting bracket, that the spacing is indeed 2-inches exactly as you has hoped. This Stromberg Carlson Trailer Leveling Scissor Jack # JSC-24-IND offers a 5000-lb capacity, 20-inch lift range and carries a one-year limited warranty. Please note that the required crank handle is sold separately, part # JCH-1.
view full answer... - Difference Between Scissor Stabilizer Jacks for RVA few of our scissor jacks have different weight capacities. For example, the part # UF48-979002 has a 6,500 lb capacity, the part # TJSC-24 has a 2,500 capacity and the # JSC-24-IND has a 5,000 lb capacity.
view full answer... - What is the Width Between The Mounting Plates On The Leveling Scissor Jack # JSC-24-IND? The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates.
view full answer... - Cost and Availability of Stromberg-Carlson Leveling Scissor Jack Set # JSC-24We offer the Stromberg-Carlson Leveling Scissor Jack both singly, part # JSC-24-IND, and as a set of two, part # JSC-24. Both stock availability and pricing can be seen on the two product's pages, which are linked for your reference. These jacks offer a 5000-lb capacity and can be bolted or welded in place.
view full answer... - Dimensions of Mounting Holes for Stromberg Carlson Scissor Jack # JSC-24-INDTo determine the measurements you were looking for, I went into our warehouse and measured the Stromberg Carlson Scissor Jack # JSC-24-IND. The diameter of the small, circular holes on the outer edge are 5/8 inches. The size of the larger, rectangular holes are 7/16 inches wide by 3/4 inches long. I have provided a graphic showing all the dimensions.
view full answer...
- Recommended Scissor Jacks To Stabilize Winnebago View Sprinter To stabilize your Winnebago View Sprinter frame I recommend using scissor jacks like part # JSC-24-IND on the rear corners of your Sprinter. I recommend using 2 jacks. This jack can be bolted or welded when installing. Welding should be done by a certified professional. I recommend these over the # TJ01RT you came from because they have a much higher support capacity. The # TJ01RT has a support capacity of 1000 lbs versus the # JSC-24-IND that has a capacity of 5000 lbs. The # JSC-24-IND...
view full answer... - Scissor Stabilizer Jacks For 2019 Aspen Trail 2480RBSYes, the Stromberg Carlson Leveling Scissor Jack part # JSC-24-IND are a great option to stabilize the trailer so that your wife can get her sleep while you are walking around in the trailer. The Stromberg Carlson jacks are more than enough capacity for your 2019 Aspen Trail 2480RBS trailer because scissor jacks do not lift the trailer like landing gear jacks do. Also you will use more than 1 scissor jack to stabilize the trailer. From my research your 2019 Aspen Trail 2480RBS only weighs...
view full answer... - Scissor Jack Replacement for Puma Travel TrailerMost scissor jack applications are universal. What that means is that the part # JSC-24-IND that you referenced would easily fit and work well. Basically you just need to attach it to the trailer frame and you'll be set. I attached a review video for these jacks for you to check out as well. In it you'll see how the jack installs.
view full answer... - Dimensions of Leveling Scissor Jack # JSC-24-INDI went to our warehouse and measured the Leveling Scissor Jack # JSC-24-IND. The bolts on the # JSC-24-IND are 2 inches apart center to center, just like they are in your photo. When closed, the stand measures 4 inches from the base to the top of the mounting bracket. It's very possible that yours, as an older jack, is simply looser when closed than the new jack, and that this is the cause of the additional 1/2 inch length on your current jack. If anything, a new jack should provide you...
view full answer...
- Leveling Jack Options For A 2020 Forest River Rockwood Mini-liteHello Harvey. Our etrailer brand scissor jacks like the # TJSCHD-24-4 use a black powder coating that, in my experience, is quite durable. I have seen them last many years with proper usage. That said, with where most scissor jacks are located on a camper, they are very prone to catching scratches from road debris and rocks. So while the coating is durable, enough scratches over time can compromise the coating if left unchecked. My suggestion is to just make sure the jacks stay clean, and...
view full answer... - Can Ultra-Fab Speed Socket Power Drill Adapter be Used with Stromberg Carlson Scissor JackThe Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 can indeed be used with the Stromberg Carlson Leveling Scissor Jack # JSC-24-IND that you referenced and it will work well. This socket will be used with your power drill to extend or retract the scissor jack up to 10 times faster than with the standard manual crank. The leveling scissor jacks can be either welded or bolted to the trailer frame. A bolt-on installation will be a bit less permanent than welding the units, but...
view full answer... - Dimension of Bolts Holes for Mount Connection on JSC-24-IND Scissor JackThe Leveling Scissor Jack - 24" Lift # JSC-24-IND has bolts that connect to the mounting feet that are 2-1/8 inches on center.
view full answer...
- Do Mounting Plates of Stromberg Carlson or Ultra-Fab Scissor Jacks Remain Level When Jack is RaisedAs the jacks are raised an lowered, the upper mounting plate are designed to remain level. As you can see from the photo I edited, the ends of the jack uprights have gears or teeth built into them so that the mounting plate remains level. The Stromberg Carlson Jack, part # JSC-24-IND operates the same way.
view full answer...
- Where to Install Stromberg Scissor Jacks on Trailer FrameTypically people mount stabilizer jacks like the # JSC-24-IND that you have on the corners of the frame of the RV so that it's as stable as possible. I attached a picture we got from a customer that shows it installed on the corner of the frame.
view full answer...
- Determining Which Leveling Scissor Jack Fits A 2017 Rockwood HW276 Tent CamperThe Leveling Scissor Jack - 24" Lift - 5,000 lbs # JSC-24-IND you were looking will likely work on your 2017 Rockwood HW276 Tent Camper, but you will need to verify that the amount of lift is correct for your specific trailer. The # JSC-24-IND has 24" of lift, so if from the bottom of the frame to the ground is less than 24" this will work perfectly. If you need more lift you can use the # JSC-30-IND instead. I included videos of the products mentioned for you to take a look at.
view full answer... - Can the Top Mounting Bracket on Stromberg-Carlson Scissor Jack # JSC-24-IND Be RotatedThe top bracket on Stromberg-Carlson Scissor Jack # JSC-24-IND that mounts to your trailer frame or other structural point cannot be repositioned. It can only be mounted as intended, 90-degrees from the main assembly. This part can be removed but the jack cannot be used without it.
view full answer... - Installation of the Trailer Scissor Stabilization Jack AngleScissor Jacks like the Leveling Scissor Jack - 24" Lift - 5,000 lbs # JSC-24-IND should be mounted at 90 degrees from the trailer frame rail. This allows you to have full crank handle movement of the Crank Handle for Stromberg Carlson Scissor Jacks and Tongue Jacks # JCH-1. The Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks # UF48-979005 is and alternative option.
view full answer... - Stabilizer Scissor Jack with 5000lb Capacity and 24” Lift For Use With Power DrillI have a solution for you, but when I called Lippert to confirm the size of the bolt on the Lippert Components Scissor Jack # LC285325 they informed me that this particular jack should not be raised or lowered using a power tool, but it does have a 3/4" nut. For that reason, I recommend instead going with the Stromberg Carlson # JSC-24-IND which works with a standard 3/4" socket. If you needed a matching socket for this jack, you can use the Ultra-Fab Speed Socket which is an adapter for...
view full answer...
- Can ARK Stabilizer Jacks Rotate 180 DegreesBoth of the ARK stabilizer jacks # ARK94FR and # ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the # ARK94FR has a square tube and # ARK87FR has a round tube. These are both going be quicker to use than raising and lowering the # JSC-24-IND which require a lot more cranking.
view full answer... - Can Scissor Jacks be Bolted or Welded On and Do They have to Face a Certain WayScissor jacks such as # JSC-24-IND used for stabilization of a trailer/RV can be welded or bolted on. However, if you choose to weld them on using a professional welder is recommended. There is no specific way they have to be placed. I have seen them with the scissor arms perpendicular to the frame and parallel with the frame. It all depends on the area they are being mounted and the available space. You will want as much contact with the mounting flanges on the jacks as you can get.
view full answer... - recommended Scissor Jack Replacement For A 2016 Keystone Passport Ultra Lite Grand Touring 2510RBWe have a few different options for your 2016 Keystone Passport Ultra Lite Grand Touring 2510RB Travel Trailer; you'll just need to measure the for the correct lift needed. The Scissor Stabilizer Jacks w/ Handle 5,000lbs - Qty 2 # TJSCHD-24 has a 18-3/4" lift. The Leveling Scissor Jack 5,000lbs # JSC-24-IND has a 24" lift. The Leveling Scissor Jack 5,000lbs # JSC-30-IND has a 30" lift.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Lori W
Video Edited:
Dustin K
Video Edited:
Zach D
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.