Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2
(415 reviews)
Price: $126.14
In Stock
Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2
Item # JSC-30
Retail:$165.47
Our Price: $126.14
You Save: $39.33
In Stock
- All Info
- Reviews (415)
- Q & A (0)
- Videos (2)
- Photos
Stromberg Carlson Camper Jacks - JSC-30
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Scissor Jack
- 9001 - 10000 lbs
- 2 Jacks
- 30 Inch Lift
- Stromberg Carlson
- Bolt-On
- Weld-On
- Steel
These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.
Features:
- Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers
- Remains steady on soft surfaces because of wide bow-tie base
- Bolts or welds on
- Includes 2 steel jacks and 1 crank handle
Specs:
- Capacity: 5,000 lbs per jack
- Extended height: 30"
- Retracted (collapsed) height: 4"
- Collapsed length: 32-1/2"
- 1-Year limited warranty
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
JSC-30 Stromberg Carlson Scissor Jacks - 30" - Set of Two
California residents: click here
Video of Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Stromberg Carlson Camper Jacks - Leveling Stabilizer Jacks 10K - JSC-30
Ellen: Hey everyone. I'm Ellen here at etrailer.com and we're going to be taking a quick look at the pair of leveling stabilizer jacks. These are going to help to keep your campers steady and stable whenever you're in there moving around, or just getting situated, walking around inside there. A lot of times, whenever you get inside a camper, if you don't have any stabilizer jacks, you can feel really wobbly and unsteady. It can actually be a little dangerous as well. So these are going to help to keep everything nice and level and mostly stable.
So we don't have to worry about it rocking back-and-forth or feeling like we're going to topple over or cause any damage to the camper. It does come as a pair of jacks, so get this one extended up pretty far. This isn't quite all the way up and the other one in the compact position. It does also come with the crank arms so you can operate those and make sure that you can lift and level them out pretty quickly and effectively.One thing I do want to note though, these are not intended to lift the whole weight of your camper. They'll just stabilize your jack.
So they're not intended to lift it up off the ground, they're just there to provide support so you want to make sure that you're not putting the entire weight of the camper just on these. You want to also be using the wheels and all that other good stuff. So just keep that in mind, they're not intended as lifting jacks, stabilizer jacks only. So let's take a closer look at how these guys work. Make sure that they're the right fit for you.
Between the two, they do have a weight capacity of 10,000 pounds, so each one on its own can handle 5,000 pounds. Again, you do want to be careful with that and not just put the whole weight of your camper there, but they will provide that amount of support.The way it's going to work is the drive nut here on the back, we'll take the crank arm with the socket, place it on there, and then just crank away to open it out. You can see it moves pretty easily. Of course, there's no weight on it right now so it's going to move pretty freely, but it should move freely as you are using it on your camper. And whenever you're closing it down, you just want to make sure that you get it all the way until that nut stops.
And of course it's acting wobbly because it's not attached to anything. As far as measurements with these, whenever it's completely closed, each jack measures about 32 inches long and then about four inches tall. We go to the top of the mounting flange there, the distance for the width of that mounting flange is about 10 inches and got several holes to choose from for that mounting plate so I'll give you a few measurements to use as reference.Between these outer most holes, center to center. I'm going to use ruler for this one. Between the two outermost holes it's about six-and-a-quarter inches, between the two closer ones it's about four inches. If we go between these two center to center again, it's right about five inches, maybe five-and-a-quarter. There might be a little bit of variance. It looks like the plates bow down a little. So as you attach this to your camper, it might draw in a little bit, so their measurements might change slightly. These are just rough estimates but there's also two small holes on either side. The distance reading on those long ways is about eight and five-eights inches. Going this way, it's about an inch-and-a-half. Here it's about an inch-and-a-half as well. So I hope that gives you an idea of that mounting plate. Whenever it's fully extended, the jacks measure about 30 inches tall. So whenever it's fully up, it should measure about that long and that bolt will stick out as it goes through or that's what drives everything, but it shouldn't ever be longer than about 30 inches.And I'm just going to give you one more measurement here to the end of that bolt, yeah, about 32 inches for that bolt. The foot is about nine inches long and about four-and-a-half inches wide. So that helps to spread out the weight of your camper, helps it to not just sink right into especially softer ground like mud or sand or softer grass and things like that. I hope that's been helpful in deciding if these are going to be the right stabilizer jacks for you. We do have a lot of options available here at etrailer.com and a lot of camping accessories in general. So check them out. Thanks for watching..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Product did not meet expectations
Customer Reviews
Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2 - JSC-30
Average Customer Rating: 4.8 out of 5 stars (415 Customer Reviews)
These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.by: Tyler07/16/2023
These jacks are solid and easy to install. Do not come with mounting hardware. I used 5/16” x 1.5” bolts with washers and lock nuts. Also added some locktite to be sure they don’t come loose. Standard attachment on most trailers seem to include one or two bolts, then the rest with self tapping screws, which isn’t very secure in my opinion. I had to drill out some of the smaller holes to fit the 5/16” bolts but an easy job for a DIY project. Thanks etrailer for selling a great product and quick delivery.
by: Michael 04/15/2024
Products and people are great I’ve ordered hitches axles and or it rams ships fast and never an issue thanks
by: Douglas06/02/2018
Very pleased with etrailor product the stabilizer jacks fit perfectly and their prompt service made it possible for us to take off to Henry's Lake Idaho Yellowstone and Grand Teton
by: Coin and Ring Guy04/28/2019
Very well made and very strong! Now I can pick my little camper off the ground! lol!!
by: Gregg L.09/25/2015
2 of the jacks on my trailer were bent and difficult to operate. Purchased this set as replacements, removed the mounting plate and they bolted right in. Perfect match and they work like when the others were new. Ordered them on Wednesday they arrived the following Monday. Nice easy process.
by: Gordon04/08/2017
Exactly what I ordered, arived in 3 days easy installation completely satisfied .
by: Terry 11/09/2023
Wuick response, fair price. Thank you
by: John 09/29/2022
Fit on my 2021 Cougar 22MLS. We had an unfortunate mishap with the auto stabilizer jacks and needed a good replacement without breaking the bank. These work great.
by: Paul 04/24/2023
Easy replacement of the old jacks. Good quality.
by: Bryan 08/25/2023
Good product, was delivered when specif ied.
by: Todd 08/03/2023
product well-built and as described.
by: Angelo 06/21/2023
Great product. Heavy duty. Easy instal l.
by: Tony 05/22/2023
They are good jacks and replaced original jacks great. thanks guys for your service
by: JWW05/24/2021
The leveling jacks I ordered have gone up considerably in price, but the service was great and they shipped very quickly. Received them in only about 5 days. Very satisfied with etrailer.
by: LLW Oklahoma04/12/2016
I have ordered several items for etrailer and all have preformed as stated, price was better and service was quicker.
They proved a load of information about product or help with installation.
*****
by: Paule09/22/2017
Works great. Put this on a T@DA, replaced bent rear lift. Took some modification and some drilled holes. No big deal. Want to replace the front ones, but they are still in good condition. Way better than original lifts.
by: LaWanna B06/01/2012
I ordered this jack set and I'm very pleased with not only how fast I got them but how they look and work. I ordered the socket also and it works great with my handydandy drill. I am using them on my camper to level it up. Thanks so much for having so much and such a great price.
by: Bon07/27/2018
They worked well with our application. Didn't use them for trailer specifically but they still worked as what we have envisioned them to be.
by: David 07/31/2022
While I’m confident the jacks are what I wanted, I don’t know yet if the mounting holes will line up.
by: Jason04/18/2012
High quality. I bolted them in place. they give you plenty of mounting holes for any position.
Etrailer was very pleasnt to deal with. Highly recomended.
by: Kelly 09/25/2021
Just what a 40’ Keystone Retreat park model trailer needs!!! Very happy with my purchase and the support this product provides.
by: Pelegrina06/29/2019
great product bought them to stabilizer our rv but they are also helping us level it so far they have been great
by: willy11/08/2016
Awesome product! Very stout and reliab le
by: Dave M.06/25/2016
These jacks are so much better than the original equipment, no the rv has no movement when it has been leveled. Big plus !
by: Steven 09/26/2022
Good price, well built, worked exactly as hoped they would
25
415
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Manual Stabilizing Jacks For Class C MotorhomeThese manual scissors jacks are for stabilization and not for leveling, so if you want to level out your Class C Winnebago Vita motorhome then you will need leveling blocks, the Ultra-Fab Leveling Blocks for Trailers and RVs # UF48-979051. Then for stabilizing jacks, ground clearance should not be an issue, no, and what you will need depends on the distance from your frame to the ground. The Stromberg Carlson Scissor Jacks have a 5,000 lb capacity per jack and each has a retracted height...
view full answer... - 2018 Jayco Melbourne Power Leveling Jack RecommendationsFor your 2018 Jayco Melbourne, I recommend the Ultra-Fab Power Twin II Electric Stabilizer part # UF39-941705. This leveling system works with frame rails spaced between 48" to 80" apart.
view full answer... - Replacement Scissor Jacks for 2019 North Trail 22CRBTo replace the standard 24" scissor jacks on your 2019 North Trail 22CRB you can use the Leveling Scissor Jack Set # JSC-24. If you typically need blocks to make up the additional height to the ground you can switch to 30" jacks with the # JSC-30. I have attached the dimensions of the installation brackets below. If this doesn't match what you currently have, you can unbolt the jacks from the bracket and install them with your current brackets for a direct fit.
view full answer...
- Leveling Jacks For Camper Trailer For Soft SurfacesSure thing, we have a couple options for leveling jacks that can be used on a soft surface like sand dunes, with the right one really depending on the lift you need: - Up To 24 Inch Lift: Leveling Scissor Jack Set # JSC-24 - Up To 30 Inch Lift: Leveling Scissor Jack Set # JSC-30 Both have a combined 10,000 lb capacity so more than enough for your trailer, and bolt onto your frame. You can then lower them however much is needed on either side to get level.
view full answer... - What Can I Do For A Malfunctioning Level Jack If I Have A Couple Of Days Before The Start Of My TripMy recommendation would be to replace the broken leveling jack, but it appears you might not have time to have it done. So I think you should get the Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2, part # JSC-30, instead. You will get two heavy duty scissor jacks that can be bolted or welded to your 2016 Jayco Pinnacle 36 FBTS. Each of the jacks is rated for up to 5,000 lbs. You will not be able to lift your fifth wheel with this jack, but you should be able to pair it with the...
view full answer... - Best Way to Attach Leveling Scissor Jacks # JSC-30 to 2 inch Wide FrameFor attaching to a 2 inch frame you'd be best served welding the Leveling Scissor Jack Set # JSC-30 since there wouldn't be enough width to get several bolts to it.
view full answer... - What Size is the Screw Portion of the Leveling Scissor Jack Set, # JSC-30I spoke with my contact at Stromberg Carlson and she stated that the Leveling Scissor Jack Set, # JSC-30, uses a 3/4 inch screw to raise and lower the jack. So the included handle would accept that 3/4 inch screw.
view full answer... - What are the Dimensions of the Top Plate on the Stromberg Carlson Trailer Jack JSC-30The diameter of the top plate on the # JSC-30 is 9 inches. This top plate is also the mounting plate as the bottom is what touches the ground. The holes on this plate are 7-7/8 inches apart measured across.
view full answer...
- Leveling Jack Recommendation to Stabilize a Coachman Motor HomeYes, the Leveling Scissor Jack Set # JSC-30 would do an excellent job stabilizing your coachman motorhome as that is exactly what this product is designed to do.
view full answer... - Can Stromberg Carlson Leveling Scissor Jack Set Be Used To Lift CarsThe Leveling Scissor Jack Set # JSC-30 should only be used to stabilize a trailer. These are not designed to lift and hold a car. Instead, I recommend using a floor jack with jack stands like # PTW1605. If you need a total of 4 jack stands you can add 2 more using # PTW41021.
view full answer... - Adding Front Stabilizer Jacks to a 2010 Forest River Rpod 174For your 2010 Forest River Rpod 174 I recommend the Leveling Scissor Jack Set # JSC-30. These have a universal mounting flange with a low profile at 4" when fully retracted. They will offer up to 30" of extension for your camper to be stabilized. These will work best mounted at an angle to the trailer rather than paralleled with either the front or side. To make it easier to move your stabilizers up and down a Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 can be used with a...
view full answer... - Stabilizer Jacks Needed for a Military M101 A2 3/4 Ton Cargo TrailerWhen fully extended the Domar Trailer Jack, # TJ01RT, measures 18 inches from top of bracket to bottom of foot. We do not have a jack of similar construction that is longer but there are options. We carry 30 inch tall scissor style stabilizer jacks, # JSC-30 (single) and # JSC-30-IND (pair), that would most likely be a better fit with the 25 inch frame height on your Military M101 A2 trailer. This would most likely be the best option for you. We also have the stabilizer leg, # FSJ20324,...
view full answer... - Can the Leveling Scissor Jack Set Be Used On a Class C MotorhomeThe Leveling Scissor Jack Set part # JSC-24 can be mounted on a motorhome yes. In regards to installation, the jack will need to be attached to a part of the frame but there aren't many other mounting restrictions. However, I do recommend you check your ground clearance once mounted so you don't have any issues with them scraping. That said, please note the above jacks only offer up to 24" of lift so if you need more than this then you will have to go with the Leveling Scissor Jack Set...
view full answer... - Replacement Scissor Jack Recommendation for a 2018 Forest River Rockwood Mini Lite 2507SWe have a handful of scissor jack options you can use as a replacement for your 2018 Forest River Rockwood Mini Lite 2507S but we don't have an exact part number for what came with your trailer. I recommend picking up the Stromberg Carlson 5K scissor jack with the 30" lift so you get the highest lift and a good, solid weight capacity at 5K per jack. Here are the part numbers for single and double kits: - Single Leveling Scissor Jack # JSC-30-IND - Leveling Scissor Jack Set # JSC-30
view full answer... - Would the Leveling Jacks # JSC-30 Work as Replacement Jacks on my Coleman Utah Pop-UpThese Leveling Scissor Jack Set # JSC-30 have a capacity of 5,000 lbs per jack. As long as you would not be asking the winch to handle more than 5,000 lbs each these jacks would work well as replacement leveling jacks on your Coleman Utah pop-up camper.
view full answer... - What is Collapsed Dimension Difference Between 24 and 30 inch Versions of etrailer Scissor JacksHey Edgar, so the 30 inch scissor jacks part # JSC-30 when collapsed are overall 32-1/2 inches long and the 24 inch version part # e65NR are 26-1/2 inches. So from where they would mount they would stick out half those distances to either side. So 30 inch would stick out 16-1/4 inches and the 24 inch would stick out 13-1/4 inches.
view full answer... - Trailer Stabilizers For Echo UTV Trailer With Frame Height Of 22 Off The GroundI recommend the Leveling Scissor Jack Set # JSC-30 for your Echo UTV Trailer. These have a maximum height of 30" and a maximum stabilization weight rating of 10,000lbs per jack. They can also be mounted to your trailer by using bolts or welding them into place. This will make it easier when you are ready to lower the jacks when needed. You can use the manual crank handle, but I recommend using the Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 to make raising and lowering the...
view full answer... - Recommend Replacement Leveling Scissor Jack Set For 2000 Skyline Nomad 2950For replacement scissor jacks on your 2000 Skyline Nomad 2950 I recommend the Stromberg Carlson Leveling Scissor Jack Set # JSC-30 which will bolt or weld to the bottom of the frame of your RV and will support 10000lbs offering up to 30" of lift. I included a video of the Stromberg Carlson Leveling Scissor Jack Set # JSC-30 for you to take a look at.
view full answer... - Stabilizer Jack Recommendation for Stored Boat Trailer To Support While in StorageScissor style stabilizer jacks like the Leveling Scissor Jack Set # JSC-24 would be your best option. These were designed to stabilize camper trailers but would work great for what you are wanting. I attached a picture of what they look like in use plus a review video for more info as well.
view full answer...
- How To Confirm Fit of Lippert High-Speed Power Stabilizer JackThe mounting holes on the Lippert High-Speed Power Stabilizer Jack part # LC298707 are 68-11/16" apart side to side on center. This fits a standard-ish trailer frame spacing. That said, there are other frames outside of this spacing and in which case the jacks would not be a good option. This would require manual stabilizing jacks like the Scissor Jacks part # JSC-30.
view full answer... - Recommended Leveling Jack System that Bolts onto Chassis of Mercedes Sprinter MotorhomeI recommend using the Leveling Scissor Jack Set, # JSC-30. This set is designed to be bolted or welded to a flat surface on the bottom of a motorhome frame rails or chassis. These 2 leveling scissor jacks with 5,000-lb capacity each will keep your motorhome level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. These stabilizers will help prevent your motorhome from rocking back and forth or side to side...
view full answer... - Why Shouldn't Scissor Jacks be Used to Support Trailer Getting Loaded with Car UnhitchedI wish I could say yes, but scissor jacks like part # JSC-30 really aren't designed for that type of application. What you are trying to do becomes a little bit sketchy because the nose of the trailer is going to want to climb as well as the trailer roll forward so basically it's a recipe for disaster. You really would want to load and unload the trailer with it connected to a truck.
view full answer... - Can Stabilizer Jacks be Used to Lift RV a LittleTo answer the last question first, a stabilizer jack such as # JSC-30 would be used until there was just enough tension to keep the trailer or RV from rocking. For actual lifting you would need a different device. So assuming that the RV was level these stabilizers would help prevent it from rocking back and forth or side to side (depending on where they were mounted) while you move around inside. If you were to try to lift weight with them you would have a very hard time because it just...
view full answer...
- Scissor Jack Options With A Low Retracted HeightHello Al. The Scissor Stabilizer Jack # TJSC-24 has a retracted height of 5". Meaning if the current jacks are at 5-3/4" you will gain 3/4" of clearance. if you are looking to gain as much clearance as possible, I suggest you take a look at the Leveling Scissor Jack Set # JSC-30. These have a retracted height of 4" and will be the "shortest" scissor jacks we offer.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Kathleen M
Installed by:
Aidan B
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Noah M
Video Edited:
Zach D
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.