bing tracking image
  1. Camper Jacks
  2. etrailer
  3. Fifth Wheel Camper
  4. Pop Up Camper
  5. RV Motorhome
  6. Teardrop Camper
  7. Travel Trailer
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4

Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4

Item # TJSCHD-24-4
Our Price: $129.66
Camper Jacks
Shipping Weight: 45 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included. 1-800-940-8924 to order etrailer camper jacks part number TJSCHD-24-4 or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (622)
  • Q & A (0)
  • Photos

etrailer Camper Jacks - TJSCHD-24-4

  • Fifth Wheel Camper
  • Pop Up Camper
  • RV Motorhome
  • Teardrop Camper
  • Travel Trailer
  • Stabilizer Jacks
  • Scissor Jack
  • 9001 - 10000 lbs
  • 4 Jacks
  • 18-3/4 Inch Lift
  • etrailer
  • Bolt-On
  • Steel

These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.


Features:

  • Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers
  • Bow-tie bases keep the jacks steady, even on soft surfaces
  • 8-Hole top plates allow for adjustability when mounting
  • Bearing set on crank side extends jack life
  • Black powder coat finish resists corrosion
  • Handle included


Specs:

  • Height:
    • Collapsed: 5"
    • Extended: 23-3/4"
  • Lift: 18-3/4"
  • Length: 24-7/8" when fully collapsed
    • 26" Long including nut
  • Mounting base: 10" long x 3-1/4" wide
    • Mounting holes: 5/8" long x 3/8" wide
    • Round holes: 5/16" diameter
  • Lift capacity: 10,000 lbs
    • 2,500 lbs per jack
  • Quantity: 4 jacks


Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.



TJSC-24 Ram Scissor Stabilizer Jack - 18-3/4" Lift - 2,500 lbs

TJSC-24-HD Crank Handle for etrailer and Ram Scissor Jacks





Customer Satisfaction Score:


Customer Reviews

Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 - TJSCHD-24-4

Average Customer Rating:  4.8 out of 5 stars   (622 Customer Reviews)

These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.

by:

Had them installed on my modified cargo/camping trailer in an hour! Was able to even level the trailer with the jacks. EXTREMELY HAPPY !!!



by:

Nicely built and sturdy. I use 2 - 4 of these to stabilize my tent trailer. A bit of overkill, as I thought these were a bit smaller (I thought the total height was 18-3/4", but that's the total amount of lift. The actual overall height is approx 24"), but that's no problem. I know these are for stabilization only, but my tent trailer is so small that I put a cordless drill with appropriate socket on them and the trailer is up and stabilized in no time. A very nice investment for my little tent trailer!



by:

After one year, these are still in great shape. I sprayed them down with Fluid Film rust inhibitor/undercoating at install. These are rated for significantly more weight than the gross weight of my travel trailer which allows me to run them up and down, and to level the unit easily with a cheap battery powered drill.



by:

Everyone reviews the horrible shipping conditions but etrailer seems to not be concerned. My box came opened, missing hardware but what do you expect when there is no packing to stop these from moving and one piece of packing tape

Etrailer Expert

Katrina D.

8/15/2023

So, after some further investigation. There is no hardware included in this kit. You can find the hardware needed at your local hardware store. Let me know if you need anything else.



by:

Just instaiied them yesterday! They seem to be very well built. They will most likley outlast the trailer! Fast shipping.



by:

Our trailer's OEM 'stabilizers' didn't do much. There was a lot of movement, most noticeable at night when one of us got up for the facilities. Enough rocking to wake the other up!

Used bottle jacks instead for a couple of seasons, but they were putzy and took up valuable truck bed space. Just installed these yesterday--a snap! They're as stable as the bottle jacks, and much more adjustable than the OEM stabilizers. They deploy and retract easily with a power drill fitted with a 3/4" bit. Should have done this years ago.



by:

The packaging was inadequate for the product. There was four jacks each weighing approximately 10 pounds. They were merely stacked loose in a box with a 6 foot piece of wrapping paper. The box was torn and broken when it arrived and one jack was partially out of the box. The product has minor deep scratches that I intend to cover with Rust-Oleum to prevent rusting. Not a good situation.

Etrailer Expert

Jenny N.

5/29/2023

I will have our Customer Service team reach out to you about the damage that the jacks have taken. This can sometimes happen with heavier products.



by:

Had these installed for a year now and everything is perfect. Great product, highly recommend!!



by:

Received the Items as quickly as possible and n great shape! The prices I have found on these and other items have met or beat everything I found on Amazon.... but best part is the communication and the warranty and the service that CANNOT be found on he other big name online sellers!

The stabilizers are just what I needed for my wifes 20' camp trailer, they are most probably much bigger than needed, but "bigger is better!"

Thanks to Michelle to the continual follow-up!

Easy install, all 4 installed in less than an hour on a trailer that had no stabilizers previously.

Check out the wife's fishing rig!



by:

Product delivered on time. Installed in a few hours and I’m very happy with this product.



by:

very fast service and easy website to use. will use them again.



by:

Shipping was fast and product was packaged well. Will be a great addition to my camper



by:

Very pleased with product. Heavier duty than I expected.



by:

Like the build of them going to be installing tomorrow.



by:

Great replacements nearly identical to original designs on my Toy Hauler.



by:

These are exactly what the trailor needed. Able to easily adjust the jacks to level the trailor. Ample mounting holes for easy install. It took less than 2 hours to install all 4 jacks including drilling into traolor frame.



by:

Well built, well finished, no instructions in box but I think there is a link provided. I am very satisfied.



by:

Delivered fast as always



by:

Excellent customer service and part was exactly as required. Highly recommend e-trailer!



by:

Great price, fast shipping and easy ins tallation.



by:

Good value and work well.

Pablo

6/25/2023

Still going strong.



by:

Came on time as described. Good quality very good service



by:

The jacks are well made and their operation is strong and smooth. The mounting is no problem with with plenty of hole options in the mounting plates. Our trailer is small so I suspect they will last a very long time!
I gave four stars based on the shipping of such large heavy items all in one box is problematic. One of the jacks in the bottom had a bent pivot point from shipping that I was able to carefully fix with vise-grips.



by:

Excellent! Fairly easy to mount and works great.



by:

Exactly as ordered! Fast delivery!! Tha nks!!!


25
621
Show More Reviews

See what our Experts say about this etrailer Camper Jacks

  • Recommended Stabilizer Jacks For A 2004 Winnebago Vista With Limited Ground Clearance
    For your 2004 Winnebago Vista, I recommend taking a look at the: -Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4. These jacks have a combined weight rating of 10,000-lbs, or 2,500-lbs per jack, and are only 5" when collapsed so they'll fit into the narrow space you're needing them. Attached is a review video for you to check out as well.
    view full answer...
  • Determining The Correct Capacity Jacks For A 14,000lb Toy Hauler Trailer
    Scissor jacks only handle a very small portion of the trailer's weight since the majority of it placed on the axles/wheels and either the landing gear (5th wheel) or trailer jack (travel trailer). The Leveling Scissor Jack Set # JSC-24 you were looking at has a 5,000lb capacity per jack and would be more than enough stabilize your 14,000lb toy hauler. Since there is only two jacks per kit you would need to order to kits to stabilize all four corners of the trailer. You could most likely...
    view full answer...
  • Recommended Suspension Lift Kit And Jacks For Livin Lite Quicksilver 8.1 Pop-up Camper
    In order to lift your 2016 Quicksilver 8.1 by Livin Lite with a #9 Dexter axle, you will need to use a lift kit such as the Torflex Lift Kit Single Axle # K71-723-01. This kit will lift your camper's frame by 2-5/8" and provide extra ground clearance. All necessary hardware and instructions are included. I am attaching a demonstration video that may help out.
    view full answer...
  • Do the Scissor Stabilizer Jacks Come with Install Hardware
    The Scissor Stabilizer Jacks part # TJSCHD-24-4 do not come with installation hardware. That said, we do offer the self-tapping screws you'll need for this using part # FA1131822. In regards to quantity, you'll need a total of 16.
    view full answer...
  • Stabilizer Jack Setup for Hithhiker 5th Wheel
    We have the manual scissor jack set part # TJSCHD-24-4 which you'd install on the corners of the RV frame to level and stabilize the RV when parked. This will do a great job removing any movement an also has more than enough capacity for your 7,000 lb Hitchhiker. we also have slide out supports to help brace them as well with part # UF19-960002.
    view full answer...
  • Recommended Replacement Scissor Jacks for a 2016 Jayco X17Z
    Matt, I'd say yes # UF48-979002 would be a bit overkill. Plus, you only get two jacks in that kit and the other kit # TJSCHD-24-4 you get 4 which is going to stabilize your trailer better. The 10K capacity that # TJSCHD-24-4 has is going to be plenty in my opinion, especially since your trailer only weighs 3,500 lbs.
    view full answer...
  • Scissor Jack Stabilizers that Can be Used on 2016 Sunseeker 3170DS
    The Scissor Jack Stabilizers part # TJSCHD-24-4 that you referenced would be a great set of 4 stabilizers that would work well on your 2016 Sunseeker 3170DS. These are easy to use and have 10,000 lbs of stabilizing capacity so they would work well on your RV.
    view full answer...
  • Recommended Scissor Stabilizer Jacks For A 2019 Grand Design Imagine 2250RK
    Scissor jacks like the Ultra-Fab Ultra Scissor Jacks # UF48-979002 you were looking at are designed more for stabilization and less for leveling the trailer because they aren't really designed to hold the weight of the trailer off the ground. Even though you won't be fully lifting the trailer I still recommend getting close to the GVWR of your trailer. The GVWR listed for your 2019 Grand Design Imagine 2250RK is 6,995lbs so with four scissor jacks you could switch to a lower rated option...
    view full answer...
  • Weight of Each Scissor Stabilizer Jack TJSCHD-24-4
    The individual weight is 10 lbs for one of the stabilizers in the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4.
    view full answer...
  • Will etrailer Scissor Jacks Fit 2014 Premiere Bullet BHS
    Yes, the Scissor Jacks part # TJSCHD-24-4 would work on your 2014 Premiere Bullet BHS due to it's universal design.
    view full answer...
  • Can Middle Rod in Scissor Jack be Replaced
    The middle bolt that extends/retracts scissor jacks is unfortunately non-replaceable so you'll have to replace the jack(s) entirely. This is because if that bolt needs replacing then more times than not the whole jack is messed up and it's safer to replace the whole thing. Here are our etrailer-branded jacks in different quantities: Single - # TJSC-24 Pair - # TJSCHD-24 Set of 4 - # TJSCHD-24-4 These jacks are rated for 5,000 lbs and have a 18-3/4" lift. I've attached a review video for...
    view full answer...
  • Fit of TJSC-24 Stabilizing Jack on Forest River Rockwood Mini Lite Travel Trailer
    The # TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you. Please note, the handle is sold separately as part # TJSC-24-HD but it's included if you purchase the pair as part # TJSCHD-24 for the 4 jack set as part # TJSCHD-24-4. If you click the produced link, you can see a product demonstration video featuring the...
    view full answer...
    Image 1 for
  • Are etrailer Scissor Stabilizer Jacks A Compatible Replacement For J-2500 Scissor Stabilizer Jacks
    I wasn't able to find the bolt pattern for your J-2500 stabilizer jacks, but the great thing about scissor jacks is that if the bolt patterns don't match up you can just unbolt the mounting brackets from the jacks and swap them over to the new jacks to avoid drilling new holes in the frame. The etrailer Scissor Stabilizer Jacks # TJSCHD-24-4 have a combined capacity of 10,000lbs, but this style of jack is only meant to stabilize so you'll only want to lower them until they touch the ground....
    view full answer...
    Image 1 for
  • Recommended Scissor Jacks for a 2018 Forest River Cherokee Travel Trailer GVWR 11,000 lbs
    If you need to replace all of the scissor jacks on your 2018 Forest River Cherokee Travel Trailer then I recommend using the Scissor Stabilizer Jacks # TJSCHD-24-4. This is a pack of 4 scissor jacks that have a 2,500 lb weight rating each. Even though they aren't designed to lift your trailer, when used in conjunction with the A-Frame jack on your trailer you will have enough stabilization to comfortably move around your trailer. These jacks only sit 5" high when collapsed and they can...
    view full answer...
  • Replacement Scissor Jacks Needed for Forest River Wolf Pup
    I can definitely help you find some replacement scissor jacks for your Forest River Wolf Pup but since I don't know the dimensions of the holes in your trailer frame I wouldn't be able to recommend something right off the bat and know for sure that it would match up perfectly. Attached is a photo of the mounting hole dimensions and locations for the Scissor Stabilizer Jacks # TJSCHD-24-4 that you were looking at. If they don't match up with what you have, then let me know what your dimensions...
    view full answer...
    Image 1 for
  • Will the 26-29 SolidStep Manual Fold-Down Steps Reduce Trailer Bouncing While Entering
    The SolidStep Manual Fold-Down Steps part # LC733931 are a great option that will indeed work well to reduce rocking and bouncing as you enter. In comparison to under-door mounted steps where the movement is transferred to the trailer, the SolidStep Manual Fold-Down Steps use the ground for support so there will not be near as much movement transferred to the trailer thereby reducing rocking and bouncing. That said, the SolidStep Manual Fold-Down Steps only really reduce bouncing/rocking...
    view full answer...
  • Scissor Jack Recommendation for 31 ft Premier Travel Trailer
    The etrailer Scissor Jacks part # TJSCHD-24-4 would work great on your Keystone Premier Travel Trailer. It has more than enough capacity as it's rated for up to 10k and has a universal mount design that will fit your trailer.
    view full answer...
  • Gauge Steel Used for etrailer Scissor Stabilizer Jacks, Mounting Hardware, and Base Pads
    Thanks for reaching out, Mark! The Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs # TJSCHD-24-4 are designed with 11 Gauge steel and install using 1/4" self-tapping screws like the Self-Tapping Screw # FA1131822. Then for base pads you just need two kits of the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR and you'll be good to go!
    view full answer...
  • Are Scissor Jacks Rated For 10,000lbs Enough For A 2000 Coachmen Travel Trailer
    Scissor stabilizers don't actually handle weight in the same way that a leveling jack would so as long as you're not trying to lift/level the trailer using the jacks the Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4 would be more than enough. I recommend doublechecking the height from the frame to the ground when level to ensure that these specific jacks extend far enough to touch the ground. If not, you can also pick up some stabilizer blocks # UF48-979051 as well to make up the difference.
    view full answer...
  • Recommended Stabilizer Jacks for Award Trailer
    Depending on the overall GVWR of the trailer and clearance from the ground, I recommend using something like the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4, which are designed for trailers with a GVWR of 10000-lbs. These are a great, pocketbook friendly solution to replace or add stabilizer jacks for your trailer and have 18-3/4" of travel when fully extended. I've linked a review video of these for you to check out, but if your trailer needs longer...
    view full answer...
  • Scissor Stabilizer Jacks For 2019 Aspen Trail 2480RBS
    Yes, the Stromberg Carlson Leveling Scissor Jack part # JSC-24-IND are a great option to stabilize the trailer so that your wife can get her sleep while you are walking around in the trailer. The Stromberg Carlson jacks are more than enough capacity for your 2019 Aspen Trail 2480RBS trailer because scissor jacks do not lift the trailer like landing gear jacks do. Also you will use more than 1 scissor jack to stabilize the trailer. From my research your 2019 Aspen Trail 2480RBS only weighs...
    view full answer...
  • Recommended Scissor Jacks for a 2021 Winnebago Micro Minnie
    The Scissor Stabilizer Jacks w/ Handle item # TJSCHD-24-4 would work great with both your Micro Minnie and the SnapPad SnapJack SJ RV Scissor Jack Pads item # SN32FR you purchased. These have a 10,000 lbs total capacity and expand from 5" to 23-3/4". I have linked a review video below so you can see them demonstrated.
    view full answer...
  • Can Scissor Stabilizer Jacks # TJSCHD-24-4 Be Welded in Place?
    The Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4 can absolutely be welded on versus bolted on if you prefer. The frame of your fiberglass travel trailer will still be steel, so you can mount it to the frame in either manner. Welding will absolutely be a stronger hold, but many people choose to use hardware which is also an option.
    view full answer...
  • Is Capacity of Stabilizing Scissor Jacks Combined or For Individual Jack
    The capacity of scissor jacks is based on the individual jack. For example, the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4 each have a 2,500 lb capacity, but since these come in a quantity of four, the capacity is a total of 10,000 lbs. Since your 2019 Micro Minnie 2100BH has a 7,000 lb GVWR, these scissor jacks would have more than enough capacity, and it is recommended you replace all of them at the same time. If you were instead referring...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Camper Jack?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.