Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. Sturdy steel construction is durable.
Features:
Specs:
Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
Average Customer Rating: 4.9 out of 5 stars (378 Customer Reviews)
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. Sturdy steel construction is durable.Excellent product and service. Joshua helped me with my order and between us we figured what I purchased was a perfect fit.
I have already mounted the stabilizers to the trailer I have made and I know they will perform exactly in the manner I had hoped for.
This was installed on my 3 point back blade and should work well for storage. It looks to be well enough made and hopefully provides many years of service. My Land Pride blade had holes in frame for a stand so I used those for mounting.
By welding stand housing to a flat plate with matching holes it was simple to install. I did however mount it fairly high allowing back blade to turn fully around for reverse usage of blade.
This will eliminate my routine of dropping it for storage and looking for a 5 gallon bucket to keep it at height.
Worked out perfectly. I welded an angle bracket to it and bolted that to the frame. Keeps the front of the trailer from lifting when I drive my zero turn mower in the rear ramp door. I raise the drop foot and pin it for towing. Works great. Going to buy more for my other trailers.
Super simple, made well, excellent value. Not worth my time to make these myself.
Tim
12/1/2023
I continue to use these simple jacks on a regular basis loading a 7000# tractor.
I bought two for my small teardrop camper. It does a good job of leveling and stabilizing my camper. I had them installed about a year ago.
I have these on multiple light duty trailers that have ramps. They work great! I highly recommend them is you have a trailer you use to load sxs or other vehicles. Or light trailers that you need to walk in and out of without having the trailer tongue lift up.
Great company to work with from ordering to delivery. After I made the initial order, they reach out to me about only having one stabilizer jack in stock and the other one would be on back order. They gave me other options if I did not want to wait. I chose to wait for the other jack to come in. They advised me that it would be the end of June. They immediately reached out to me in the end of June to inform me that they were still waiting on the supplier and that it would now be the first of August. I received and email on July 21st that the order was filled and will be shipped. I received the order on July 24th. I did find the same stabilizer jacks on other websites but they were twice as much and shipping was also more. It was worth the wait to save money to me. The jacks are well made and will work great on the rear of the trailer. I have previously used car jacks to keep my trailer secure. Now I don't have to haul around car jacks. I had the stabilizer jacks welded on by a local business. They did an outstanding job securing the jacks on the rear of the trailer. They work better than expected. Should have done this a long time ago. Now I can load equipment without my truck being connected to the trailer. I will be using etrailer for all my trailer needs. Great company to work with and customer service. I have attached a few pictures.
Sierra K.
8/3/2021
Thank you for your review and excellent attitude! Thank you for being patient with us.
Christopher D.
7/28/2022
They are still working out great. After a year they function the same as the day that they were installed. No rust or any other defects after a year. It is nice to load and unload equipment or other items with it being my trailer being connected to my truck. Again I should have done this a long time ago. Great company.
Great product. I use these for the back of my utility trailer for loading a compact tractor. Does exactly what I need it to do. Keeps the pressure off the hitch and the stress off the back of the trailer.
Installed a set on my trailer years ago so I can load heavy lawn mowers safely. Bought a set for a friend's trailer for the same reason. Too bad I had to wait months for them to be in stock again. Since I weld, these work well for me, all trailers are different and each needs special mounts. The outer tube could be longer and thicker because most trailers (that can benefit from these) are about 15 inches off the ground. If I'm not hauling stuff, I can drop the legs and use the trailer as a steady work space. A suggestion, make sure the trailer is mounted to its truck so you can install these so the holes line up when the trailer is level. Make sure the trailer is on level ground, not a sloping garage floor.
Ray
7/21/2023
I rebuild trailers, people love these things
Used 2 of the Drop Leg Stabilizer's to support the front of a Limb Clipper. When I detached it from my JD it would twist to the side and make it difficult to hook up. NOW it stays straight and attaches easily !
Simple to mount and easy to adjust. I installed 4 on a trailer being used for a Mobile Hunting Blind.
The stabilizers will allow me to pull this trailer just about any location and level it making it safe and more functional. Great product.
Can't say enough good things about etrailer. Placed my order on the 27th, with a 5-7 day deliver time, was sent a notification from etrailer that my order was shipped that day, and they were able to upgrade my shipment to 3-5 day deliver at no extra charge to me. I received my order the following day (28th) That my friends is customer service at its best. The Stabilizer jacks I ordered are exactly what I needed, and I couldn't find them anywhere else, etrailer not only had them, but priced way lower than what I was expecting to pay, top quality items from a top-quality company.
They have performed as expected. For many applications, I can see where they would not be sufficient as a stabilizer jack because they don't really give any fine control for leveling unless you're using shims under them which would be very time consuming. For my application, I ONLY needed to stabilize my trailer so they have worked fine. .
These jacks are perfect. Exactly what I needed to support the back of my equipment trailer when loading it.
Exact product I needed at a great price regardless of where it was made. Etrailer always has what I need and is delivered in good time. A Texas tip of the hat to the shipping folks. My packages are never improperly prepared.
Doug
7/24/2023
These stabilizers were used on all 4 corners of my trailer mounted hunting blind. Once set for use the trailerblind remains firm with no shake.
Fantastic shipping speed wow free upgrade and excellent product quality can't wait to install onto my trailer
Zachery
10/6/2023
Excellent! Works as it did day one and solid construction. People have seen my trailer and wanted to do a similiar variation on their car haulers
Very happy with the jacks. Just what I needed to stabilizer the rear of my 16' flat bed trailer when I load my tractor.
Simple and affective I have them on the rear of my low boy to keep the trailer from squatting and raising the truck up when loading a heavy tractor and used 2 on three point implements that didnt come with parking stands
Love these things, add them to customer trailers all the time. Would be better if the outer dark steel were heavier gauge to permit welding without risk of burn throughs.
Wonderful service! We had been working with a local parts dealer trying to find these exact legs, only to have been waiting for months. So I took over and found etrailer. I ordered them and they were shipped within 3 hours and I received them the next day. Exactly what we needed and we are able to now meet the deadline our customer requested! Pricing was amazing, communication was amazing, we'll be ordering again & again!
I welded these to my flatbed equipment trailer I drop them to support the trailer while loading my mini excavator. Without them I lift the rear of the truck way too much, with them the truck doesn’t move. Great product
Great stabilizer leg for shop projects .
Was looking to replace the stabilizers on our teardrop. Fellow campers recommended etrailer.
Decent inexpensive solution for loading jacks.
Finish is rough around the edges and not deburred very well.
I wish the came with plastic plugs for the top of the inner piece both because it is sharp and in my application it would keep from banging my trailer when stowing.
Richard
4/4/2019
Didn’t really work out on my utility trailer for loading garden tractors. I’d try and leave 2-3” between the foot and ground then run my tractor up the ramp. Most of the time this worked but fairly often the foot would end up carrying some weight making it impossible to retract without either unloading or getting a floor jack. Swing down adjustable jacks are a better choice.
I'm sure most of us have seen or heard about people attempting to load a utility trailer that was unhitched and watched the tongue of the trailer go flying skyward and dumping the people and or the load? For years i got by with a couple of logs that i cut to proper length and used them to brace the rear of the trailer while moving loads on or off while it was unhitched. Logs aren't exactly convenient to travel with, they look ghetto and are heavy and take up space.
After looking around for a while, i finally welded two of these on either side of the rear frame of my 12' utility/landscape trailer. They serve as an excellent stabilizer and allows me to load or unload the trailer without being hooked up to the truck. I can drop the trailer off at a job site and it can be loaded without keeping a truck attached. Obviously be careful and chock the tires and please don't doing this on a hill.
I start off by lowering the front jack slightly, set these stabilizers and then raising the front jack back up slightly until they make contact in the rear.
By lowering the front jack all the way and setting the rear stabilizers on the lowest pin setting available, i can actually pull the tires several inches off the ground. Convenient if you need to change a tire or service a hub.
Another perceived benefit is when storing the trailer it will keep the tires off the ground if i chose to.
Etrailer has been great. The shipping was fast and they include very detailed specs and measurements on every product they sell.
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
3/29/2024
Since I purchased the first pair of stabilizers, I purchased another pair to mount onto the rear of the trailer. I completed the trailer and mounted a deer blind to it and it can be pulled anywhere and once in place, Stabilized and leveled and ready to hunt from. These stabilizers were the perfect solution to getting the blind level and STABLE. Will keep them in mind if I ever need a product like this again. Best I have ever seen !!