Ultra-Fab Ultra Scissor Jack - 30" Lift - 6,500 lbs
(660 reviews)
Price: $91.57
Ultra-Fab Ultra Scissor Jack - 30" Lift - 6,500 lbs
Item # UF48-979032
Retail:$133.99
Our Price: $91.57
You Save: 32%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (660)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks - UF48-979032
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Scissor Jack
- 6001 - 7000 lbs
- 1 Jack
- 30 Inch Lift
- Ultra-Fab Products
- Bolt-On
- Weld-On
- Steel
This scissor jack can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanism won't slip. Oversize footplate helps to eliminate sinking and tilting.
Features:
- Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers
- Heavy-duty worm-gear jacking mechanism prevents slippage
- Perfect for stabilizing loads
- Large footplate provides excellent stability
- Bolt-on or weld-on installation
- 3" Wide x 10" long mounting plate has multiple holes to fit most applications
- Mounting hardware not included
- Crank handle not included
- Sturdy steel construction
- Black powder coat finish resists corrosion
Specs:
- Lift: 30"
- Collapsed height: 4-3/4"
- Support capacity: 6,500 lbs
- Footplate dimensions: 5" wide x 9" long
- Lifetime warranty
Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
48-979032 UltraFab Scissor Jack - 30"
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Ultra-Fab Ultra Scissor Jack - 30" Lift - 6,500 lbs - UF48-979032
Average Customer Rating: 4.7 out of 5 stars (660 Customer Reviews)
This scissor jack can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanism won't slip. Oversize footplate helps to eliminate sinking and tilting.by: John 12/02/2022
Fit perfectly and works great.
by: Bob B09/20/2019
After I got lazy and did not fully lift the rear
Jacks on my 5th wheel trailer I had to move it and needless to say destroyed them. The new ones I got from Etrailer were just what I needed, 10-15 minutes to bolt both on they extend and retract very smoothly. I couldn’t be happier. (Unless I didn’t get lazy and cost myself some cash)
by: Jim04/19/2023
The quality of this scissor Jack is excellent. My issue is that I based my purchase off the recommendation of local staff and the scissor Jack protrudes out from the side of the camper by 4 inches. As you can see from the pictures the fitment is spot on. Disappointing to say the least, I’m hoping this will not catch on anything if I have to make a tight turn.
by: Joey 05/10/2020
I am very impressed on the customer service and the way the follow up on your order.
It is very important in good client customer relations and I will be getting more from etrailer
Also the quality of the product is above what I expected so thank you on that I do and will recommending e trailer to any and everyone thank you e trailer for such an outstanding experience
Joey Glover
Joey
5/12/2021
Its been a year and by far this product is remarkable and very strong dose exactly what I got them for
by: Scissor Jack 30 Jack06/21/2014
The item seems of good quality and quickly bolted in place where the old jacks were. I recently put new axles and springs on the trailer and inverted the springs raising the distance from the ground so it would not drag on hills etc.
One minor complaint: the screws work in opposite direction of all my other jacks that I have ever owned which means the ones on the front screw cclockwise where the rear screw the normal clockwise to raise the trailer.
by: John04/20/2019
Haven't used it yet, but it was delivered earlier than expected. It arrived in good packaging and undamaged. It is of very good quality and sturdy steel. I'm sure it will work fine. Thank you etrailer
John
4/22/2020
I use this jack to level my RV trailer when needed. It does a great job. It will even lift the whole trailer if needed to change tires. It is well built and durable.
Heather A.
5/20/2020
Scissor jacks like the Ultra-Fab Ultra Scissor Jack part # UF48-979032 are only made to stabilize and support the trailers weight not lift the trailer. I recommend to use a bottle jack like Powerbuilt Unijack Bottle Jack with Built-In Jack Stand part # ALL620471 to lift the trailer to change the tires. It is not safe to use the scissor jacks for that.
Helpful Links
by: William01/14/2019
Was delivered quickly, packed well, meets my requirements, for a jack to lift my hilo for tire changing.
With 1/2 inch drive battery operated impact tool and 3/4 socket head that fits the hex head crank, easily lifted the travel trailer up, to replace wheels on trailer.
I expect it will lift my truck when required to replace tires on it also, being it's rated at 6500 lbs. The use of the impact tool makes it a lot easier then cranking the hydraulic jack.
by: robert10/11/2014
So we dropped the axles on the fifth wheel for better ground clearance, the stock jacks were useless to begin with, and 24"-jacks would have to e all the way out. These 30"-jacks were the ticket, OK they're a little big, but man do they work. A great buy for anyone sick to piling up blocks to stabilize their trailer.
by: Bill 01/29/2023
Does the job, I just have to remember the screw is opposite of the other 3! I didnt know that when I bought it or until after I installed it. But it does work a whole lot better than the one I mangled by being stupid! Lol
by: Laketime03/09/2017
Very good quality, everything e-trailer said it is. I used it for a different purpose however, I mounted a 24" 2x6 to the top and place it under my travel trailer tongue where the 2x6 crosses the V shape of the tongue. This adds extra stability when the trailer is stored as well as taking the pressure off of the factory electric tongue jack. Just something I thought was good since the trailer storage is on a slope the tongue is up a little higher than I felt comfortable with. I would recommend this product.
by: Brian G.10/02/2019
Used this for a replacement on a jetski trailer that is launched in salt water. It has held up good for the first year.
by: Twin Lakes Rv Resort12/02/2019
Very nice jack, way way better than original factory jack. Must add, I love working its etrailer, well run company and incredible customer service. They are the Crutchfield of trailer supplies. Kudos
by: Mark07/26/2018
Super fast shipping, easy installation, extends 30 inches, mounted a pair at the very rear of my front living 5th wheel
by: martin brandt04/25/2014
Delivered promptly, intact, and perfect fit for both the scissor and A frame jack. Thanks, Marty
by: Gary L.11/27/2016
This scissor jack is as good as the original that I trashed.
by: Bill McCutcheon10/10/2014
Everything arrived very quickly, and ws in perfect condition. I will Confidently do business with ETrailer.com Again.
by: Bryce J12/06/2015
Fit perfectly and arrived quickly, mechanisms jacks effortlessly and smooth. Great customer service as always.
by: Jim09/22/2021
Easy install to replace a damaged stabilizer. Everything I needed.
by: John12/15/2017
Great product and great service! etrailers has a very quick response time and great delivery time.
by: Hal06/07/2013
Heavy duty jack - I can recommend.
by: Bill 11/07/2020
Jacks are nicely made and appear to be heavy duty. I thought it was odd that these are a left hand thread but they work great.
by: David 08/10/2022
Parts arrived as promised.
by: Jerry 07/18/2022
I had a special need and the customer service person, Paul was great.
by: All Jacked Up06/21/2020
Solid product. Installed nicely!
25
660
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- Recommended Travel Trailer Stabilizer Jacks For 6,000LB Dry Weight CamperSince you are looking at stabilizer jacks the weight is not as important especially with a dry trailer weight of 5,977lbs. Most stabilizer jacks are rated for at least a 5,000lb rating per jack. Do remember that this is a stabilizing weight rating and not a lifting capacity. I would focus mostly on lifting height and mounting position. You want to make sure that the jacks are tall enough for your camper not only on level ground but if you like to dry camp at more primitive sites you will...
view full answer... - Replacement Scissor Jacks For 2020 Venture SportTrek Travel Trailer I spoke with multiple vendors and could not find one with matching bracket holes to your current set up without having some custom made. The tech at Ultra-Fab recommended removing the brackets from your old scissor jacks and bolting them onto the Ultra-Fab Ultra Scissor Jack - 30" Lift - 6,500lbs Item # UF48-979032 in place of its brackets.
view full answer... - Where Are RV Scissor Jacks MadeThe RV scissor jacks are all made overseas including the Ultra-Fab Ultra Scissor Jack part # UF48-979032. There are no USA made alternatives I am aware of. There really isn't another option unfortunately.
view full answer... - Recommended Lifting Jack To Carry With a Utility Trailer For Changing Flat TiresI am going to recommend the Powerbuilt Unijack # ALL620470 for carrying with your utility trailer as the Ultra-Fab Ultra Scissor Jack # UF48-979032 is only designed to stabilize a trailer and is not to be used to lift the trailer axle off the ground. The Powerbuilt Unijack # ALL620470 uses a hydraulic jack with a built in jack stand that will make it safer to use while you are changing the tire. It has a weight capacity of 4,000lbs, which is likely more than your 8' utility trailer is...
view full answer... - Best Stabilizers for Off-Road TrailerThe best stabilizers we offer for a trailer that sits high off the ground are going to be the Ultra-Fab Ultra Scissor Jacks part # UF48-979032 which offers 30" of lift. This option mount permanently on the trailer but it also completely retract so you won't have to worry about reduced ground clearance.
view full answer... - Difference Between Ultra-Fab Scissor Jack Part Numbers UF48-979032 and UF48-979031The Ultra-Fab Ultra Scissor Jacks # UF48-979031 that you referenced is a quantity of 2 of the Ultra-Fab Ultra Scissor Jack # UF48-979032. So its the same jack, but one part number you get a pair of them and the other part number you get just one.
view full answer... - Solution for Broken Shaft of Scissor Jacks on CamperI really wish there was, but based on what broke on your scissor jacks your only solution will be a new scissor jack as the shaft is not replaceable. We have the 24 inch travel scissor jack from Ultra Fab part # UF48-979006 and the 30 inch # UF48-979032 which would work really well.
view full answer... - Adding Stabilizer Jacks to the Rear of a Fifth WheelTo measure for ground clearance for stabilizer jacks you were correct in that you need to measure from the bottom of your fifth wheel's frame to the ground when you are set up (including if you are using blocks). For exampl the Ultra-Fab # UF48-979032 jacks have a lift of 30" and collapsed height of 4-3/4". I've attached a link a to video review of this product for you to take a look at.
view full answer... - Scissor Jack Stabilizer Jack Compatible with 8,000 lbsScissor jacks are stabilizing jacks and not intended for lifting. Their rated capacity is only for stabilizing. We have kits with capacities above 8,000 lbs but the largest support capacity for a single jack is the Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs # UF48-979006 or the 30 inch lift # UF48-979032. So if you use one on each side of your trailer that gives you a 13,000 lb support capacity at that location since you wouldn't put it on one side and not the other.
view full answer... - What Install Hardware for Ultra Fab Stabilizer Jacks # UF48-979032Since every application will be a little bit different the Ultra Fab stablizer jacks part # UF48-979032 do not come with hardware nor do they have recommended install hardware. A lot of people will weld these to their trailer but to pick the right hardware it's going to come down to checking out where you want to install these and going with what makes the most sense.
view full answer... - Will the Ultra-Fab Scissor Jack Fit a 32 Foot North Trail TrailerThe collapsed height of the Ultra-Fab scissor jack # UF48-979032 is 4-3/4 inches leaving you with 19-1/4 inches of clearance from the ground to the bottom of the jack. The jack also has multiple holes for mounting to any frame or it can be welded on by a qualified professional. Because it is so versatile, this would be a great choice for your trailer. You might also be interested in the speed socket power drill adapter # UF48-979005 to make lowering and raising the jack faster. It can...
view full answer... - Recommended Set of Scissor Jacks for Stabilizing Travel TrailerWe do offer many choices in a scissor-type stabilizer jack for your travel trailer. You can see all of them by clicking on the link provided. On the page you can click on the filters for the weight capacity, lift height and type of mounting method you prefer - bolt-on or weld-on. For a set of two scissor jacks that each have a 2500-lb rating and 18-3/4-inches of lift we offer # TJSCHD-24. This set comes with a crank handle and you can see its features and operation in the video I linked...
view full answer... - Maximum Support Height of Ultra-Fab Scissor Jack # UF48-979032The Ultra-Fab Ultra Scissor Jack - 30" Lift - 6,500 lbs # UF48-979032 will extend 30 inches for a max extension of 34-3/4 inches.
view full answer... - What is Overall Length of Ultra-Fab Ultra Scissor Jack # UF48-979032 Fully CollapsedI went to the warehouse and measured the overall length of the Ultra-Fab Ultra Scissor Jack, part # UF48-979032, in the fully collapsed position. It measured 33-1/2 inches from one end to the other end, and the measurement includes to the end of the bolt. The bolt that the crank handle attaches to protrudes about 2-1/4 inches from the end of the scissor jack. I am including a photo with the measurements listed.
view full answer...
- Where to Measure on a Scissor Jack to Determine if it Will Fit on a TrailerIf you can tell me the mounting hole spacing of the old scissor jack I can determine if any of the models we have will fit. For example on jack # UF48-979032 there are a total of 8 mounting holes. Take a look at the picture I have included that shows the hole spacing. If your jack is different let me know what you come up with and I can determine if anything we have will fit.
view full answer...
- Does Replacement Stabilizer Scissor Jack Have to be Same Size as Older JackA replacement stabilizer scissor jack needs to have the mounting pattern to fit your trailer, as well as the lift and needed weight capacity. For example, I have added a photo of the mounting plate of the Ultra-Fab Ultra Scissor Jack # UF48-979032. It is a fairly universal design so it should fit most trailers. The jack also has 30 inches of lift and a 6,500 lb weight capacity. So those are the three things you'll need to know in order to get the correct replacement stabilizer scissor...
view full answer...
- What is the Weight of the Ultra-Fab Scissor Jack # UF48-979032The Ultra-Fab Ultra Scissor Jack # UF48-979032 that you referenced has a shipping weight of 15 lbs. Typically the packaging for shipping weighs about 3 lbs which leaves you with a total of 12 lbs for the jack itself.
view full answer... - Lift Kit For a 2015 Forest River Rockwood High Wall 277 Camper With Dexter #10 Torflex AxleYes, the Torflex Lift Kit # K71-707-01 is going to be compatible with the #10 Torflex axle under your 2015 Forest River Rockwood HW 277. This will raise your camper 2-5/8" so you will need to be aware you will likely need a different ball mount to keep your trailer level when towing. It will also raise your steps so you may need a Step # PA-275 if you already have a high first step into your camper. For the stabilizers it would appear your camper would have come with a 24" Jack # UF48-979006....
view full answer... - Stabilizer Jack Recommendation for Front of Sunray 149Sounds like you are looking for a set of scissor jacks like the part # UF48-979032. These will fit your trailer and work well. They provide up to 30 inches of lift so they will easily make contact with the ground.
view full answer... - Replacement Stabilizer Jacks for a 2005 Forest River Cherokee 26RRThe stabilizer jacks on your 2005 Forest River Cherokee 26RR are pretty much universal so you will not need to know the exact part number in order to replace them. For a replacement, I recommend taking a look at the Ultra-Fab Ultra Scissor Jacks part # UF48-979031 which offer 30" of lift and have a 6,500 lb capacity. I recommend replacing the jacks in pairs but if you would just like to replace one then you can use part # UF48-979032. The Ultra-Fab Ultra Scissor Jacks will be an excellent...
view full answer... - Troubleshooting a Scissor Jack thats Hard to OperateIt could be damaged, I would first inspect it looking for any bent components or damaged threads. In that case it would need to be replaced. If that checks out I would recommend trying some spray lube to see if maybe that will free it up. The Ultra-Fab Products Trailer Jack # UF48-979032 that you referenced would make a good replacement if you determine your jack is damaged.
view full answer... - What is the Inside Width of the Bracket on the Ultra-Fab Ultra Scissor Jack # UF48-979032I pulled the Ultra-Fab Ultra Scissor Jack, # UF48-979032, from our warehouse to take some measurements of the mounting bracket for you. I was not sure what you meant by inside width, but the attached diagram shows all of the dimensions of the mounting bracket that you should need. If I missed the dimension you were looking for, let me know and I would be happy to find it for you.
view full answer...
- Recommended Replacement Scissor Jack for a 2019 Flagstaff Microlite 25BDS Travel TrailerWe do sell replacement bolt on scissor jacks that you can install on your 2019 Flagstaff Microlite 25BDS travel trailer. I am not sure the exact ones that came on your trailer but for a single unit I recommend the Ultra-Fab Ultra Scissor Jack # UF48-979032 because it offers up to a 30" lift and has a support capacity of 6,500 lbs both of which are the most for any scissor jack that we carry. Since scissor jacks operate independently they don't have to be an exact match to be used as a pair. Please...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
12/2/2023
It is great. I love Etrailer. People know they stuff and easy to work with.