Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755

See what our Experts say about this Dutton-Lainson Boat Trailer Parts

• Roller Bunk # DL21754 Recommendation for a Flatbed Trailer Converted to a Part-time Boat Trailer
  Yes, I would recommend you get Boat Trailer Standard Roller Bunk, part # DL21754, for hauling your boat that weighs 235 lbs in your flatbed trailer. These are sold in 4 foot sections and should work well for you once installed. You may be interested in Boat Trailer Roller Bunk Bracket # DL21762 for when you install the roller bunks in your trailer.
  view full answer...
• Can the Dutton-Lainson Bunk Board Bracket DL21762 Rotate to Match Hull Angle
  I apologize for all of the confusion. I can tell you with absolute certainty that the Dutton-Lainson Roller Bunk Bracket, # DL21762, will pivot to allow the roller bunk to conform to the angle of the boat or watersport vehicle's hull. The hook piece at the top of the bracket will pivot at the rivet that holds the hook to the mounting bracket. The hook is not easy to rotate because it is designed to have enough tension to hold itself in place once you set it to your desired angle, but a...
  view full answer...
  
• Roller Bunk Bracket Recommendation for Mounting to the Cross Member of a Traile
  The Boat Trailer Roller Bunk Bracket # DL21762 that you referenced would work well as a roller bunk bracket for installing onto the cross member of your trailer. I attached a page that has all of our roller bunks also.
  view full answer...
• Roller Bunk Replacement for 2004 Bear Trailer w/ G3 1860 CCT
  Rollers like the part # DL21741 that you referenced can attach to the top of bunk rollers like you have, or if they need to be replaced we also have swivel hangers you can use as well for install with # DL21762. The roller section referenced is a 5 foot section which we also have 4 foot sections with # DL21740 which you can use to come up with the best length for your trailer.
  view full answer...
• Can Roller Bunks be Used as Tilting Bunks
  The mounting brackets that you mentioned, # DL21762, can also tilt but the part that attaches to the trailer will be fixed. If by tilting you mean front to back (up and down) then roller bunks # DL21755 are not really designed to work that way. You may be able to attach bunks # DL21741 directly to the wooden bunks that you have and keep the tilting feature the same. You may have to position the bunks a little differently since this method essentially makes the bunks taller by about 2...
  view full answer...
• What Size Bolts to Use to Install Dutton Lainson Roller Bunks
  There isn't an exact bolt size used to install the Roller Bunk part # DL21755 to the bracket part # DL21762. What I can do is show you a picture that shows all of the dimensions of the # DL21762 that will help you pick out the correct size hardware to use based on your application.
  view full answer...
  
• Recommended Roller Bunks for 22' Pontoon Boat Trailer
  There are a lot of great options for roller bunks for your 22' pontoon boat trailer. I've included a link to our selection of roller bunks below. I recommend the Dutton-Lainson Boat Trailer Standard Roller Bunks # DL21755 for their clean look and high weight capacity. These are 5' bunk boards that have 6 sets of 2 rollers along each board and have a weight capacity of 3,000 lbs. They can be attached to your trailer using existing 2' x 4' bunk boards or with the Mounting Brackets # DL21762....
  view full answer...
• How to Install the Boat Trailer Roller Bunk Bracket # DL21762
  The Boat Trailer Roller Bunk Bracket # DL21762 will secure to the Roller Bunk by hooking around the bolt underneath the rollers. The slot in the bracket will be bolted to your trailer or your existing wooden bunks. The slot in the bracket allows it to be adjusted higher and lower on the bolts. These brackets are designed to work with the 4 foot # DL21754 and 5 foot # DL21755 Roller Bunks by Dutton Lainson.
  view full answer...
• Roller Bunk Recommendation For Bear Trailer With CCJ G3 Jon Boat
  Since you said the bunks on your trailer are 8 ft long, I recommend two sets of part # DL21754, which are 4 ft long and attach them end to end to your bunks, which would cover the 8 ft span your current bunks measure. If you wish to remove the bunks you currently have you could use a bracket like part # DL21762 to attach the roller bunks directly to the trailer frame. These are sold individually and 4 are needed to mount a pair of roller bunks. If you choose to use two sets of rollers,...
  view full answer...
• Recommendations for Boat Trailer Roller Bunks for a 2400 Pound Boat
  First off, there may be a solution to the bunks not aligning with the hull. With the Dutton-Lainson roller bunks we offer, you can also get Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks, # DL21762, for the pivoting black steel roller bunks, or # DL21742, for the galvanized. These brackets allow the roller bunks to be adjusted vertically from the trailer and angled to cradle the boat hull. Neither galvanized roller bunks, # DL21741, and # DL21740, will pivot. But both...
  view full answer...
• Roller Bunk Bracket # DL21762 Recommendation
  For a roller bunk bracket designed for roller bunks you would want a Boat Trailer Roller Bunk Bracket # DL21742. If you wanted a set of roller bunks for this bracket I would recommend the Boat Trailer Standard Roller Bunk # DL21754. I spoke to my contact at Dutton-Lainson and he informed me that the Slotted Bunk Bracket # DL21584 that you referenced was designed to work on wooden bunks and would not be recommended for a roller setup.
  view full answer...
• Additional Height of Boat Trailer Standard Roller Bunk # DL21754 When Mounted on Bunk Boards
  The Boat Trailer Standard Roller Bunk # DL21754 is going to add 3" of height to the 2'X8" vertical bunks that you have. We do have the Boat Trailer Roller Bunk Bracket # DL21762 that can be used if you feel that the rollers and bunks would raise the boat higher than you would like.
  view full answer...
• Connecting Bunk Rollers to Form a 10' Roller on my Boat Trailer
  We have a great solution for you. Using the Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks part # DL21762 and two of the Dutton-Lainson Boat Trailer Deluxe Roller Bunk 5' part # DL21741 you will be able to get the 10' roller bunks you are looking for. These are also available in 4 foot sections as part # DL21740. Some of the factory bunk brackets are welded on and some are bolted on if they are bolted on simply take off the single middle and replace it with two of the...
  view full answer...
• Availability of Dutton Lainson Roller Bunk Brackets 6356
  I found the brackets you are looking for with part # DL21762. For some reason Dutton Lainson has two part numbers for these. One is 6356 and other is 21742.
  view full answer...
• Recommended Roller Bunks for 14 ft Alumicraft Trailer
  The Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers # DL21741 would just allow the small v you mentioned to sit on top of the flat roller. Another option is to use the 2 roller style of the Boat Trailer Standard Roller Bunk - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson # DL21755 which have a little more flexibility. You can attach this roller bunk with the Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks # DL21762 instead...
  view full answer...
• Replacement Rollers For 1965 Vintage Boat Trailer
  We do have some of the replacement rollers that will work for your vintage 1965 boat trailer, but we do not have some of the rollers you asked about. Thank you for the dimensions. For the very front keel roller I recommend part # YR5213-5. This measures 5 inches long and works with a 5/8 inch diameter shaft. The three center rollers I recommend are part # YR5203-5. These are also 5 inches long and fit a 5/8 inch shaft. We do offer bunk rollers and you can take a look at part # DL21754....
  view full answer...
  
• Installation of Boat Trailer Standard Roller Bunks 5 Foot # DL21755
  The 5-foot roller bunks # DL21755 can be attached directly to vertically-mounted 2 x 4 bunk board. I would suggest using stainless steel or galvanized hardware. Another option is to use the # DL21762 brackets, 4 brackets are needed to mount a pair of roller bunks. With the brackets, the bunk can be adjusted vertically and can be angled for a custom fit to your boat hull. I have posted a short video showing how the bunks attach to a 2x4 and to one of the brackets for you to review.
  view full answer...
• How Do The Roller Bunks Attach to Roller Bunk Bracket # DL21762
  The roller bunks themselves, like # DL21755, have holes on the bottom at either end. You place a bolt through these holes. The hook part of the bracket, # DL21762, goes around the the bolt underneath the rollers. The slotted portion of the bracket is then bolted to the trailer or existing wooden bunks. The holes are slotted so it can be adjusted higher or lower on the bolts. The roller bunk brackets, # DL21762, are sold in quantities of 1 but a total of 4 are needed to mount a pair of...
  view full answer...
• Fitment and Parts Needed To Mount Roller Bunks On a Trailer For a V-Hull Boat
  Yes, you can use the Boat Trailer Standard Roller Bunks # DL21755 on a boat that has a V hull. These can be attached to the edge of 2" X 4" Bunk Boards # CE27820 or to Boat Trailer Roller Bunk Brackets # DL21762. The mounting brackets can be angled to match the angle of your boat to ensure that the weight is evenly distributed across all the rollers.
  view full answer...
• Recommended Roller Bunks for 600 lbs. Boat
  The Dutton-Lainson Boat Trailer Standard Roller Bunk # DL21754 has a combined weight capacity of 2500 lbs. for both bunk rollers. They can be mounted right on top of wooden bunks. Also, if you 'd like to remove the wooden bunks that are likely on your current trailer you will need the brackets # DL21762. You will need 4 brackets to mount the two roller bunks. I've attached the review video of the roller bunks for you to look at.
  view full answer...
• Dimensions of the Slotted Bunk Bracket for Boat Trailers # DL21762
  The dimensions of the Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755, item # DL21762, are as listed below. 10-3/4 Inches Overall length 3 Inches Overall Width 2-3/4 Inches Inside Width 7-1/4 Inches Slot Length 3/8 Inch Slot width 3 Inches from Top of Bracket to the Start of the Slots 10-3/8 Inches from Top of Bracket to the End of the Slots
  view full answer...
• Recommended Roller Bunks To Make Loading and Unloading G3 1710 On Bear Boat Trailer Easier
  Adding roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers # DL21741 you were looking at are a great option to make loading your G3 boats 1710 on your bear trailer much easier. If you have 10' bunks using two of the # DL21741 to match your bunks is recommended. If you have 8' bunks you will want to use Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson # DL21754 instead. To attach the roller...
  view full answer...
• What Are Dimensions Of Dutton Lainson Roller Bunk Brackets
  The slots in the Boat Trailer Roller Bunk Bracket, part # DL21762 are 7-1/4 inches long so you will be able to use that length to move the brackets where you need them on your trailer frame. Here are the dimensions of the brackets you may find helpful. I have also included a photo of the bracket you can check out. 10-3/4 Inches Overall length 3 Inches Overall Width 2-3/4 Inches Inside Width 7-1/4 Inches Slot Length 7/16 Inch Slot width 3 Inches from Top of Bracket to the Start of the...
  view full answer...
  
• Placing Boat Bunks for Maximum Contact with Boat with a Ribbed Hull
  The Roller Bunk # DL21755 measures 3-1/2 inches across the wheels where your boat will be sitting. Also, the wheels pivot to help make contact with the bottom of the boat. Since you currently have vertical bunks you'll need the brackets # DL21762 to connect the bunks to your trailer. This will give you the option of adjusting the height and placement of the bunks which means you can decide where on your boat the wheels will make contact with the boat to put them in the best suitable...
  view full answer...

Do you have a question about this Boat Trailer Part?