CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel
(57 reviews)
Price: $32.92
In Stock
CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel
Item # CE10305G
Retail:$37.99
Our Price: $32.92
You Save: 13%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (57)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE10305G
- Rollers
- Roller Bracket
- Galvanized Steel
- CE Smith
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.
Features:
- Panel bracket supports a 12" roller on your boat trailer
- Bolts to your trailer's frame
- Mounting hardware not included
- Sturdy, 11-gauge galvanized steel construction resists corrosion
- 6 Gussets provide extra strength by stiffening the bends
- Slotted mounting holes allow you to adjust the position during installation
- Made in the USA
Specs:
- Quantity: 1 bracket
- Application: 12" rollers
- Accepts a 13" long x 5/8" diameter roller shaft
- Dimensions of mounting slots (each): 1/2" wide x 5" tall
- Spacing of mounting slots: 10" apart on center
Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
10305G 11-Gauge Galvanized Steel Replacement Panel Bracket by CE Smith - 12" Rollers
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel - CE10305G
Average Customer Rating: 4.9 out of 5 stars (57 Customer Reviews)
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.
by: Bill 10/22/2022
Because my boat would almost never load in a centered position on my trailer, I added three of these along the keel area for my deep V boat, I added rollers in these brackets that taper to the center of the roller and my boat loads perfectly the first time every time.
by: Dennis06/26/2023
Parts were better quality than expected! Will be ordering parts from etailer.com
by: Randy 08/11/2023
Prompt helpful service
by: Timothy05/31/2020
Galvanized bracket seems strong and made to last. Good price for what it is.
Gave it four stars because one of the roller shaft holes had to be cleaned out with a drill bit to allow the roller shaft to go through the hole.
by: anthony04/15/2013
Overall the this bracket, roller and rod are sturdy and will do the job. Only trouble I had was there was excess galvinizing material blocking the hole for the roller rod. I had to clear it up with a file. Not a big deal but I hope it doesn't leave a gap in the galvinizing.
by: Brian07/18/2018
Galvanized finish had a chip, but I plan to paint it anyway. Otherwise seems high quality. I bought one locally that is too big and allows the roller bushings to pop out. This measures 12.25 inches width, so it should fit the roller well.
by: Steve04/17/2020
Everything was great!
Roller bracket is heavy, not tinny at all.
The winch bolt pattern was different then my trailer but the trailer is a 1987 so no big deal!
Thanks keep up the good work!!
by: Robert A.08/11/2017
Excellent Products and etrailer provides outstanding service and stands behind their products. Prompt shipping, support, and responses.
by: Clint P.10/15/2016
Your standard 12" roller bracket in Galvanized Steel. Does it's job. Wish it was available in stainless steel though.
by: Earl04/20/2023
Great product,great price
by: John S04/03/2020
To make it stronger for my purpose I had to all another plate but this bracket was perfect in every wat
by: Kurt S.06/04/2016
I mounted this trailer roller on the edge of my dock, so I could roll in kayaks single-handed. It has really worked out well.
by: Frank05/04/2022
The roller bracket is made very well mounted it a few days ago I don’t see any problems with it but if I do I will send a review
by: Casey 03/16/2023
Oh good and fast delivery
by: Larry09/30/2019
These items are very well made and will be having them installed Thursday. I as very pleased how pleasant and helpful Kathy was in ordering. Your website is very well done and the package was very well packed and the tracking is the best I ever seen. I may send a picture after installation and have used them.
by: Ryan 08/14/2022
Worked as advertised, installed easy en ough.
by: Carl 08/19/2022
Outstanding product -- exactly what I ordered --- fast delivery -- good service. I can only say good things about this product and the company.
by: Don 07/28/2022
Don't know just got it haven't installed yet give me a little time.
by: John04/10/2022
Excellent quality and shipped in a timely manner.
by: Paul05/13/2020
Great product and timely delivery even during the pandemic. Appears to be just what I needed to make my boat loading easier.
by: Winston 02/27/2021
by: Joche03/11/2015
Nice and heavy. Looks like you can try to beat it into submission, but you won't. The galvanize finish looks high qual.
by: Gary04/18/2020
Everything I've ordered from these people has been good quality, this order was no exception. Good products, great and timely service, who could ask for anything more?
by: Gary08/04/2020
ordered Thursday, received Monday! Good products. ordered from here before, always great service! Will order from here again I'm sure.
25
57
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Parts to Mount 12" Roller GuideWe have the Yates # YR12243-5 side guide roller measuring 12" long with a 5/8" shaft. We also have the CE Smith # CE10305G Panel Bracket for 12" Boat Trailer Rollers in Galvanized Steel. For roller shafts we have the closest we have is CE Smith # CE10727A measuring 13" X 5/8" shaft, in zinc plated steel.
view full answer... - Diameter of Yates Rubber YR12000 Boat Trailer Keel RollerAt the narrowest spot in the center, the Yates Rubber # YR12000 Keel Roller is 2-1/4 inches in diameter. At the ends which is the thickest part of the roller, the diameter is 3-5/16 of an inch. For a panel-style mounting bracket, use # CE10305G and for a roller shaft and pal nuts, use # CE10727A.
view full answer... - Capacity of YR12244-125EC Yates Rubber Boat Trailer Keel RollerAccording to Yates Rubber, the # YR12244-125EC roller technically carries a 400 lb capacity, but the roller shaft like # CE10727A and the mounting bracket like # CE10305G do most of the heavy lifting. This is the strongest keel roller they offer. My contact at Yates tells me that the first thing to bend would be the roller shaft, and a 5/8 inch diameter shaft like what I referred to above wouldn't begin bending until around the 2000 lb mark. It's recommended to install more than one of...
view full answer... - What Hardware Is Needed To Mount CE Smith Panel Bracket CE10305G For 12" Keel Roller?To mount the CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel # CE10305G you were looking at you have two options. The first being welding the bracket to your trailer. If you go this route you need to make sure to sand off the galvanized coating as it gives off a harmful gas when it is welded. The second and more common option is using U-bolts. The U-bolts will need to match the size of the frame on your trailer so you will need to measure that. For example we have...
view full answer...
- Availability Of PVC Keel Roller That Is Self CenteringI may have an option for you, but there is not a 8" version of the CE Smith Keel Roller for Boat Trailers - Self Centering # CE29505. If you are wanting the self centering feature you will need to use 12" # CE29505 and replace your current mounting bracket with the CE Smith Panel Bracket for 12" Boat Trailer Rollers # CE10305G and a new shaft # CE10727A. We do however have the CE Smith Keel Roller for Boat Trailers # CE29517 which is made of the same material and is the 8" length you mentioned,...
view full answer... - Will Roller part # YR12243-5 Fit on Roller Bracket # CE10305GThe 12 inch roller part # YR12243-5 that you referenced is designed to fit the CE Smith Panel Bracket # CE10305G. You would just need the roller shaft part # CE10727A which comes with pal nuts and you would be set. There isn't a stainless steel version of this available but this will resist corrosion well since it is galvanized. The roller will spin easily and would work well. This would work well for a roller on a boat trailer for a 500 lb boat. 4-1/4 inches is the distance from the...
view full answer... - Can CE Smith Galvanized Panel Bracket be Used with a Stainless Steel ShaftCE Smith Panel Bracket # CE10305G is galvanized steel but the method of which the zinc coating was applied would not matter in terms of galvanic or dissimilar metal corrosion. Stainless steel and galvanized steel work well together with only a slight and minor chance of there being any corrosion. Of course in salt water environments it will increase that chance. So you can use a stainless steel shaft. This bracket takes a 5/8 inch diameter shaft. We do not have stainless steel shafts though...
view full answer... - Self Centering Keel Roller and Mounting Hardware For Boat TrailerThe CE Smith Keel Roller for Boat Trailers # CE29505 is our only self centering keel roller. It is 12" wide versus the 8" that you are looking for. We do have the CE Smith Panel Bracket for 12" Boat Trailer Rollers # CE10305G and Roller Shaft with Pal Nuts # CE10727A if you would like to move to the 12" keel roller to lessen the chance of your keel hitting the edge of the smaller 8" roller you currently have.
view full answer... - Does Centering Keel Roller # CE29505 Come with Install BracketsThe self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes pal nuts.
view full answer... - Where To Install a CE Smith Self Centering Keel RollerFor starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G and the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10727A. In regards to installation, these will need to be installed towards the stern of the boat, in the center of the trailer. This would be the only place that would allow them to effectively center...
view full answer...
- How To Help With Centering Boat On Trailer When LoadingI have a few options to help with loading the boat on the trailer but the best would have to be the CE Smith Keel Roller for Boat Trailers part # CE29505. In order to mount them you'd need the Roller Shaft with Pal Nuts part # CE10727A and CE Smith Panel Bracket part # CE10305G. I would stick with the same type of roller for the front and rear of the boat trailer.
view full answer... - Replacement 12" Keel Roller Assembly for Boat TrailerOur current keel rollers are designed for a 12" Bracket # CE10305G. We do have these available with the 12" bracket as a Assembly # CE10455G so you get the new roller and shaft. This particular Roller # YR1200Y uses a thermal-plasticized rubber which is stronger than rubber and softer than polyurethane for durability without damaging or marring your boat.
view full answer... - Can I Use the CE Smith Self Centering Keel Roller on my TrailerI may have a solution for you, but it doesn't look like your trailer has any bracket in place in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer. For that reason you would first need to have a roller bracket like the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G welded to the frame or attached with U-bolts to match your trailer frame size. If you went the welded on route, the # CE10305G is galvanized steel...
view full answer...
- Parts Needed to Install the 12" CE Smith Self Centering Keel RollerHey Manuel, thanks for reaching out! In order to install the 12" CE Smith Keel Roller for Boat Trailers - Self Centering # CE29505 you'll need the Roller Shaft with Pal Nuts # CE10727A along with the mounting bracket kit # CE10305G or # CE10500G. I took a look at our U-Bolt kits and none of them will fit a 3-1/2" square tube so you'll need to source those locally.
view full answer... - Can CE Smith Keel Roller CE29505 be Used With Jon Boat TrailerWe don't offer 2 inch keel rollers, so you may have meant the 12 inch CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber # CE29505. And yes, you can use these on your boat Jon boat trailer, and to do so you will need the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8" # CE10727A and CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel # CE10305G. The bracket can be installed with U-bolts such...
view full answer... - Height to Top of Roller with Bracket # CE10305G and Roller # YR12243-5 from Mounting SurfaceThe top of the roller will end up being 4 inches from the mounting surface. The hole on the # CE10305G is 2-3/4 inches from the mounting surface, and then half of the diameter of the roller part # YR12243-5 is 1-1/2 inches.
view full answer... - Length Of Shaft Needed For 12" Roller With End Caps On Both EndsHi Melissa, You can definitely install 2 of # YR224-5 end caps on the ends of the # DL21554 while on the # CE10305G bracket, but not with the # CE10727A roller shaft. Each end cap will add 1-1/2" of length so you would need a roller that is at least 15-1/2" long to accommodate the extra length and a little more for the pal nuts to have a good purchase area. That said, we do not have one in that specific length so your best bet would be to grab the Roller Shaft w/Cap Nuts 19" x 5/8" #...
view full answer... - Parts Needed To Replace 12" Keel Roller That Fits 1-5/16" Diameter PipeI have another option for you, but we do not currently carry any Keel Rollers that would fit a 1-5/16" pipe. Instead I recommend going with the Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 12" Long - 5/8" Shaft # YR12244-125EC you were looking at and then adding the correct bracket # CE10305G and shaft # CE10727A to your trailer. This will allow you to use a standard keel roller, and make finding replacements now and in the future much easier. I included videos of...
view full answer... - Recommended Boat Trailer Keel RollerYou'll want to ensure the height of the new roller is consistent with that of the other support components, such as the roller bunks. This will ensure no one part of the trailer bears more weight than the others. Next time you load the boat you can measure the space at your preferred mounting location and then use the adjustable bracket # CE32004G referenced above to locate the new roller in the correct position. We offer keel rollers in both black rubber and non-marking thermoplastic...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Written by:
David L
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Winston
2/28/2022
All products are working fine. They are as durable as expected. These are not the first parts Ive bought or used. It is the first review Ive written. Usually I do not have time to really assess the parts. Only time tells what the quality is. And as far as Im concerned, these are quality parts.