Recommended Roller Bunks For 26' Seaswirl Boat Weighing 4200lbs

Question:

I have a 26foot Seaswirl walk around with twin 150 HP outboards, approximately 4200#. I currently have bunk boards and loading the boat is difficult at best. Would these work for my application?

asked by: Larry C

Expert Reply:

You could absolutely replace your standard wooden bunk boards with the CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair # CE27700 you were looking at, but since they have a 1500lb rating each you will need to make sure to use at least 3 pairs due to your boat being 4200lbs.

These roller bunks will allow you to load your 26' Seaswirl much easier.

The easiest way to install these is to just attach them directly to your existing bunk boards, but if you would rather remove the bunk boards you can do that and install them on your existing bunk brackets using the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4 # CE10003G-4 for extras if needed.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C