Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.
Features:
Specs:
Adjustable boat guides can be fine-tuned to work with your boat and your trailer. The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat. The rubber roller guides help to center your boat during loading and to hold the boat during transport.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (383 Customer Reviews)
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.Always easy to find what you're looking for and order on etrailer.com. The best communication ever with follow up emails notifying you the item(s) has shipped and confirming you received. Thanks for this approach and being the service oriented company you are.
good quality, no sharp edges easy to install , I couldn't wait to get home to put them on ,they look good , I just ordered some lights to put on them ,So I am waiting to get them before I put the caps on top of the tubing
Product looks great can’t wait to receive the extra log U-bolts to install them.
Only problem is it would have been nice to have an option to order a complete kit that fits a 5” frame. Kinda lame having to pay over thirty$ on 4 u-bolts (that don’t come with nuts and washers) seemed a little ridiculous.
Received it this morning and already installed it it was about a 20 minute job
Sturdy and adjustable to the width of your boat to get you centered on your trailer every time. I love em. Would buy again.
Walter
9/8/2023
These roller guides are working just as good as the day I bought them.
Mike L.
11/1/2023
Was not able to guide a 18’ I/O boat, was not strong enough.
These rollers are awesome! The perfect solution to my problem. I have a 16' Gheenoe and there was an issue loading my boat. As I am a paralyzed vet trying to load the boat by myself from a wheelchair on the ramp. There was too much room from the rear guides to the front of the trailer in which the boat could drift left or right before I got it positioned.
These rollers help guide her on and keep it going straight. I can now load/unload like a pro. Now if only etrailer could help me catch fish.....
These guides are heavy duty and really nice! The U Bolts are also heavy duty and hold the guides rock solid on my Tee Nee Trailers 1 1/2"x 3 1/2" frame! I really wanted roller guides taller than 15", but found they really measure 21" from the botttom of the guide to the top of the roller! Mounted mine on top of the frame for an extra 1 1/2" of height giving me 21". Very happy and so glad I found your website! Thank you etrailer.com! I will be back!
Haven't installed yet but looks good.
Hardware is zinc plated. Salt water will rust it up in no time
Have mounted the rollers on the trailer of our 14’ aluminum runabout’s trailer and am looking forward to a dramatically improved launch and recover opportunity when we next use the boat(wind or no wind). Should have installed these years ago.
Good product. Makes it easier to get boat aligned straight on trailer. Very good instructions on installation and the video helps a lot!
Richard
4/6/2023
The roller guide-ons have worked well for my boat. They make it easier to keep the boat straight on the trailer, which still can be a challenge especially on windy days.
I need to fit this product to my 1960 vintage Holsclaw trailer. I had ordered the longer guide units but found they wouldn't work because of the style of the trailer and having to center the keel of the boat to the main beam roller at the back. Since they extend above the gunnel of the boat and the gunnel being wider at the front of the boat then at the transom, proper alignment to the center beam roller was impossible. I needed a guide that positioned on the spray rail rather than the gunnel. I think this roller will work perfectly once I locate the boat back a few inches on the trailer. Thanks for all your help. I think I will be able to load my boat alone.
I have used this before and they work great so I got them for my new boat. Working with etrailer.com has also been a great experience - good price and quick shipping.
Perfect fit to replace existing roller
Douglas
11/4/2023
Still on the job and working nicely
Fast shipping.
Love them. Makes loading a boat by myself very easy. I have confidence that loading at the ramp in any weather will be a snap.
Purchased one and it worked but due to a limited 4” roller width needed a second roller to improve alignment for my aluminum boat on windy days. Have mounted all rollers but have not tested yet.
Worked great. Recommend
On the trailer and ready to go, Thanks for the speedy delivery
just installed but havent tested yet. pretty stout rollers and should help fight back against the tides here in florida. cant wait for maiden voyage!!!
Got them put on my trailer, they look good and stick up about 8" higher than my side bunk boards which will make loading in waves/wind MUCH easier. I mounted mine on top the trailer rails.
These roller guides were very easy to work with and easy to install. I have already had a friend that wants to get a pair of them and mine were not even installed yet.
We installed them the day we received them not sure what to expect, but we were excited. We took out the boat the following weekend, when it was time to load up our boat we got ready. My wife, with minimal experience, was in charge of the task. She lined it up and voila, easy with no problem at all. We definitely recommend these roller guide-ons.
Ricky
8/17/2022
After a year of having our guides they have worked great. It makes loading up our boat very easy, every time. We have our daughters loading up the boat now and they are doing it with out a problem.
Did not work on my trailer.
Jenny N.
7/20/2023
I wanted to reach out and ask how it did not work for your trailer?
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gene
5/10/2024
Guides work great. Simple to install. Makes my deep V go on the trailer straight.