Does Replacement Upright for CE Smith Roller-Style Guide-Ons Have Square Holes for Carriage Bolts

Question

Question:

I am interested in a trailer guide on part# CE27609PG-1 It should have two square holes used to attach a roller. The pic on your website does not show the square holes.

asked by: George

0

Expert Reply:

The Replacement Upright # CE27609PG-1 that you referenced does have the square holes on the back of the upright portion of the bracket to allow carriage bolts to run through them and attach the rollers of the # CE27610.

Our product pictures for the upright don't show the angle where you would be able to see the holes but they are there.

expert reply by: Jameson C

0

Answer 1

Yes, you can change the angle of the bunks in the CE Smith Bunk-Style Guide-Ons #CE27660. The brackets that hold the bunk boards are bolted to the tops of the posts so once the angle needed is set you would tighten those bolts to keep that angle.

view full answer...

Answer 2

We do offer the following replacement parts that will allow you to just get a single bunk guide like those found in the CE Smith Bunk-Style Guide-Ons Set #CE27660. Replacement Upright #CE27609PG Qty 1 CE Smith Swivel Bracket #CE10200G Qty 2…

view full answer...

Answer 3

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Answer 7

The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…

view full answer...

Answer 8

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 9

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

view full answer...

Answer 10

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 11

Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler #DM13203-95 or #DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard 3" wide channel…

view full answer...

Answer 12

Your surge coupler will have either a sticker or an engraving on it, typically near where the coupler is located. If you can get me that information and what you're needing to replace on it I'd be more than happy to help you find what…

view full answer...

Does Replacement Upright for CE Smith Roller-Style Guide-Ons Have Square Holes for Carriage Bolts

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching