Does The Yates Keel Roller YR1000Y & YR1000B Come With Brackets?

Question

Question:

where do you get the mounting bracket thats in the picture for the double roller set up ???????

asked by: Chris C

0

Expert Reply:

Both the Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft Item # YR1000Y and the Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft - Blue Item # YR1000B are replacement rollers. Each roller is a different size so depending on what bracket you have currently. So these rollers do not come with the brackets. These are both designed for a 10" wide bracket with 5/8" diameter shaft. Here's a bracket that it will fit # CE10304G but we do not carry a 10" wide roller.

If you're looking for a roller set up that will come with everything you need you can grab the CE Smith Roller-Style Guide-Ons for Boat Trailers Item # CE27610. These are 21" tall and come in a quantity of two. You'll need to make sure that your trailer frame is no larger than 3" wide and 4-1/4" tall.

I've included two videos to show you how the CE Smith Rollers work, install and what the package comes with!

expert reply by: Adam E

0

Answer 1

Yes, you can use two sets of the Dutton-Lainson deluxe roller bunks #DL21741 side by side on one bunk or next to each other on separate bunks, as long as each pair of 5' sections is not supporting more than their 3,000 pound weight capacity. You…

view full answer...

Answer 2

Yes, you can use two sets of the Dutton-Lainson deluxe roller bunks #DL21741 for your 6,000 pound 23 foot Boston Whaler as long as each pair isn't supporting more than their 3,000 pound weight capacity. The capacity for a set of Dutton-Lainson…

view full answer...

Answer 3

The 10 inch keel rollers from Yates Rubber, like part #YR10000 have a bushing on either end and a metal tube in the middle that acts like a bushing. The #811 simply has the plastic caps at each end. I'd recommend the #YR1000B from Yates. The…

view full answer...

Answer 4

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I have a solution for you but the part #CE10190GA-4 is not available in a half kit so what you would want is the part #CE10190GA with the swivel bracket part #CE10206G. We don't have the bolt and nut though so you would need to supply that…

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Does The Yates Keel Roller YR1000Y & YR1000B Come With Brackets?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching