Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs
(110 reviews)
Price: $119.30
In Stock
Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs
Item # LG-142178
Retail:$152.27
Our Price: $119.30
You Save: $32.97
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (110)
- Q & A (0)
- Photos
Stromberg Carlson Accessories and Parts - LG-142178
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Stromberg Carlson
Replaces the 5,500-rpm motor from your Stromberg Carlson electric landing gear. Designed for use with models LG-1 and LG-2. Can also be used with Atwood, Lippert, and Venture landing gear.
Features:
- Replaces the motor from your tandem landing gear
- Designed for use with Stromberg Carlson model LG-1 or LG-2
- Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models
- Single-speed motor won't trip circuits or cause problems with coach's electrical systems
- Wires to the switch that originally came with your landing gear set
- Replacement motor control switch (LG-145236) is sold separately
- Made in the USA
Specs:
- Dimensions: 8-1/2" tall x 4" long x 3-3/8" wide
- Distance between mounting holes (on center): 4-1/8"
- Weight capacity: 5,500 lbs
- Motor speed: 5,500 rpm
- 10-Gauge wiring
- 1-Year warranty
LG-142178 Stromberg Carlson Replacement Venture Landing Gear Motor for Fifth Wheel Landing Gear
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs - LG-142178
Average Customer Rating: 4.7 out of 5 stars (110 Customer Reviews)
Replaces the 5,500-rpm motor from your Stromberg Carlson electric landing gear. Designed for use with models LG-1 and LG-2. Can also be used with Atwood, Lippert, and Venture landing gear.by: John Martin07/27/2018
I ordered this landing gear motor and gear box on a Monday. It was delivered on Wednesday at noon. From Missouri to Boynton, Virginia in just 2 days UPS ground. Unbelievable!! I installed gearbox and motor in 15 minutes and was able to get my camper back off my truck and enjoy the rest of our vacation. The new gear box is made of aluminum instead of plastic and actually fit better than the original one.Thank you so much Crystal S.
by: Nicholas09/14/2023
this crossed as a direct replacement for my old motor however it won't lift my trailer. it slows to a stop and doesn't even have enough power to lower the trailer with its full weight on it.
by: Scott 04/23/2024
Working fine.
by: Anthony02/23/2018
Received the new landing gears with motor and had to install a month later due to weather and the flu. It was a breeze to install with a minimum of hand tools. The staff at Etrailer did a great job of selecting the exact parts I needed and sending via expedited mail. Took a photo of old parts before removal as instructed by staff so I could put the new parts in correctly. The new parts were of high quality and exact match. They went in easily. Took about 2.5 hrs with a few breaks included. See photo of a happy camper with new landing gear and motor.
by: John 04/01/2024
Got my order sooner than expected. And it fixed the problem
by: George 02/04/2024
The motor was a perfect fit! Sara help me find what I needed and in a very timely manner, she was very polite and helpful.
by: Steve S.04/27/2015
Quality parts and great service.
I used this motor & switch as an upgrade to my Atwood manual crank landing legs, and am impressed with the instructions, fit, and quality of the motor and switch.
by: Les A08/01/2023
The product and eTrailer are great. As an RV maintenance center, it's a pleasure to do business with you.
by: Brian R02/13/2023
The tracking # shipment date was a week off! It was an easy install, but did not include a switch or wire nuts to attach wires. Motor works great.
by: Randy05/20/2020
I initially put a new gearbox on my jacks thinking that the electric motor should still be ok. Wrong. It must have gotten hot too. I contacted etrailer and discussed the problem and was told to get this motor. I did and once it was on it works great. William B. helped me with this and was great.
Randy
5/24/2021
Gearbox and motor are working fine after a year of use. Parts fit as advertised.
by: Raymond02/03/2023
this was for a replacement on a Lippert Landing gear product, works fine perfect fit easy to install and most important 1/3 of the price of the Lippert one
by: Terry 09/01/2023
Got it when the email showed I would. Nice service. Thank you.
by: Robert 07/11/2023
Part fit and worked perfect
by: Larry08/17/2021
This is a great replacement motor and gearbox for my 1994 Lance 945 11'3" truck camper with Atwood jacks. The main problem with the Atwood jacks was that the ball screw shaft and ball screw nut were rusted, removed the jacks, removed the motors and gear boxes, removed the 2 pins and the helical cut gears themselves, ran the screw shaft out of the tubes. Cleaned the rust from the ball screw shafts and lubricated the shaft with waterproof grease.The only problem is that the balls in the ball screw nut are also rusted and will take some time to start to recirculate as these balls need to break free. The only thing that I had to do to the motors was remove the feet on the gearbox and also drill and tap a new 1/4 inch bolt hole.These motors have bolt spacing that is closer together. This $[xxx] fix isbetter than purchasing new jacks at $[xxxx]
D tape
by: Erik08/11/2019
Product worked as expected, very quick delivery. This was ordered with the gearbox for my 2008 Grand Junction.
Erik W.
8/13/2020
Worked as expected. Thank you.
by: terry cochran07/10/2014
This was an exact replacement part and was easy to install
The service was fast and very much appreciated. This was not my first purchase from e-trailer nor will it be my last. Great job guys.
Terry C.
7/10/2015
Great
by: Ken04/22/2020
I was surprised at how small the motor actually is compared to the unit I removed from my trailer. I also purchased landing gear because that is what initially failed on my 5th wheel. I realized that my motor would not adapt to the new landing gear so I ended up having to purchase this motor. The set up seems to work OK but I haven't used it much yet. The fasteners that came with the motor were to long and I had to grind them down to shorten them. There was a big gap in the plastic gear reduction cover. That closed up when I tightened the unit to the landing gear. Easy to install. Just remember you get what you pay for, quality normally reflects purchase price. For what I paid I did not have high expectations. etrailer was easy to work with and I will definitely buy from them again.
by: Enos05/29/2021
Service and delivery was very good. Received item in great shape as described. The only concern I have it looks like I didn’t order a strong enough motor, it seems to struggle even though it’s rated for 5500 lbs. I should have done a little more research.
Jon G.
6/4/2021
Thank you for the review! Something you might want to check on is the RPMs. This motor is rated for 5,500 RPMs which is good, but if your old motor was rated higher it would explain why this one feels like its struggling.
by: Pat 07/28/2023
Fast shipping and well made!
by: Susan10/13/2022
It works if you take your time and operate it slowly. It is not really strong enough to lift the trailer easily.
by: Jason 09/10/2022
Received 2 days ago. Installed in 10 minutes, and perfect fit into existing landing gear. It is a little louder than the original motor, and haven't fully tested it more than 10 minutes. Will update review if I have any issues during first few months.
by: German 05/07/2015
Right fit great customers service, I will deal with etrailer in the near future.
German
5/6/2016
Great
by: Don M09/11/2017
The motor fit into the same place the old motor was in on a Cougar 5th Wheel. The polarity of the wires were reverse from the original unit supplied with the Cougar. Speed is a bit slower compared to the original.
It works fine and does the job. Better than hand cranking!
by: solorolow03/31/2015
the motor installation was a brezze
Solorolow
3/30/2016
Very good
by: JL01/13/2015
Parts arrived sooner than I was told they would. Coupled to gear reducer box and fit perfect the first time. Service and knowledge provided by Rennie was excellent. Price was better than I found anywhere else ... especially with the free shipping! Will do business with them again when I need parts.
25
110
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Jayco Eagle 5th Wheel Landing Gear 5,500 lb Motor ReplacementFor your Jayco 5th Wheel I recommend product # LG-142178 which is manufacturer matched as the correct replacement while also offering the 5,500 lb weight capacity you were looking for.
view full answer... - Replacement Landing Gear for 2007 Montana 3500RLI spoke with Lippert and according to them they have a custom set of replacement legs made specifically for the Keystone Montana RV Line. The specific OEM replacement legs for the Keystone Montana's are Follow Leg # LC178652 and the Lead Leg # LC178653. Because of their unique designs they will be the only ones that fit the Montana. The replacement motor for the Keystone Montana is # LG-142178.
view full answer... - Replacement Landing Gear Motor Recommendation for 2008 Keystone LaredoTo pick out a motor, I need to know the landing gear brand. The replacement motor # LG-142178 could work as it is confirmed to fit Venture, Atwood and Lippert landing gear. This is the most common replacement we offer, but if you have a different brand email me back and I will find you what you need.
view full answer... - Parts Needed to Replace an Atwood 75721 Landing Gear MotorYou are correct that the proper replacement motor for your Atwood 75721 is the Replacement Motor for Stromberg Carlson Electric Landing Gear, part # LG-142178. You are also correct that the gearbox compatible with this motor is the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear, part # LG-179015. Good work on finding the correct parts for your motor. This will definitely work for you. I've linked to a video review that includes both of these parts.
view full answer... - Replacement Options For Travel Trailer Jack With Atwood 75722 MotorWe have found that the Replacement Motor # LG-142178 can be used to replace your Atwood 75722 motor you have on your 2013 Jayco travel trailer. I would recommend upgrading your entire jack to the Lippert Smart Jack Electric Trailer Jack # LC643589. This will ensure you get all new components in the event your current jack has excessive wear and that is what caused your current motor to fail. The smart jack allows you to program a hitch height for the jack making it easier to raise your...
view full answer... - Replacement Landing Gear Motor For An Atwood 75721 Landing GearThe correct replacement motor for your Atwood 75721 landing gear, is the Replacement Motor for Stromberg Carlson Electric Landing Gear # LG-142178. This motor has a maximum weight capacity of 5,500-lbs, and measures 8-1/2" tall, 4" long, and 3-3/8" wide.
view full answer... - Wiring Diagram for Wiring Switch to Landing Gear Motor of LG-142178Check out the picture I attached that shows how the switch of the # LG-142178 wires to the motor and battery.
view full answer...
- 5th Wheel Landing Gear is Clicking But Hand Crank WorksSince you can use the hand crank to use the landing gear, we know it isn't a problem with the legs, which means it is either the gear box or motor. What you can do is disconnect the motor from the gear box and power it on to see if there are any issues. If not, then it is highly likely it is just the gear box, which you can replace: - Replacement Aluminum Gearbox # LG-179015 Otherwise, if it is the motor you will need to replace that with the Replacement Motor for Stromberg Carlson Electric...
view full answer... - Landing Gear Extends But Does Not RetractIt could actually be the motor or the switch that is causing your landing gear legs to extend but not retract. In order to test this you will want to find the wire that goes from the retract terminal on the switch to the motor. If you test this wire for power with a circuit tester that will give you your answer. If you get power on this wire while the retract position of the switch is engaged then you know the motor is bad and will need to be replaced for which we have the Replacement Motor...
view full answer... - Troubleshooting 5th Wheel Landing Gear That's Blowing Fuse There a couple of additional things you can check out. Take a good close look at the wiring, especially at pinch points and areas where the wiring might pass through a frame member or bulkhead. Cracks or worn spots in the wire insulation can allow the copper conductor to short out on the trailer frame and cause the fuse to blow. Also, disconnect the motor and try the landing gear manually. If it works manually, there's a wiring problem somewhere. If it won't, there's a mechanical problem...
view full answer... - Does Stromberg Carlson # LG-146060 Include a Replacement MotorThe # LG-146060 is a repair kit for the follower leg of a 5th Wheel landing gear. It includes replacement gears and pins needed to repair the leg. The kit is compatible with a # LG-1 or LG-183708 landing gear, and it does not include a replacement motor. If you have a # LG-1 or a # LG-183708 landing gear, and you need a replacement motor, that part number would be # LG-142178.
view full answer... - What is Needed to Replace the Gearbox of an Atwood 75721I have a solution for you. First, though, to replace the gearbox for your Atwood 75721, you'll need to replace the motor along with the gearbox since there aren't any gearboxes made for that motor any longer. As you mentioned, due to the age of both of these components, it's probably a good idea anyway. For the motor, you can use the Replacement Motor for Stromberg Carlson Electric Landing Gear, part # LG-142178. For the gearbox, you can use the Replacement Gearbox for Venture Aluminum...
view full answer... - Replacement Landing Gear Motor for 2013 Fleetwood Flagstaff Classic Super LiteReplacement landing gear motors are specific to make/models of landing gear, but there are a majority of systems that can use the same motor. It isn't a "one size fits all motor" but there are a couple of motor options that will fit the majority of landing gear systems. I have two motor options that will fit a wide variety of landing gear, but I still recommend checking your landing gear for the make and model to make sure one of these motors is the right option. The Replacement Motor...
view full answer... - Replacement Motor For Rear Jack On 2007 Jayco 5th Wheel The replacement motor depends on the brand of motor on your 2007 Jayco 5th wheel. Based on the information I can find, it looks like the Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs # LG-142178 is what you need because Stromberg Carlson Landing gear was used on Jayco trailers around that 2007 year of manufacturing.
view full answer... - What Lead Leg for Landing Gear Will Fit the Stromberg Carlson Electric Landing Gear Motor LG-142178The Replacement Motor for Stromberg Carlson Electric Landing Gear # LG-142178 will work with Stromberg Carlson model(s) LG-1 or LG-2 and most electric landing gear sets, including Atwood, Venture, and Lippert models. You don't really pair the lead leg to the motor, you would find a motor that is compatible with your landing gear/lead leg. If you have one of the systems above, you would be good to go with the # LG-142178. If you are needing a lead leg that is compatible with a motor and...
view full answer... - Replacement Motor and Gearbox for a Venture M-9000-PKThe Venture M-9000-PK is a very common motor and we definitely have the replacement needed. The Stromberg Carlson # LG-142178 will be a direct replacement for your Venture set up. This would then be mated to the Gearbox # LG-179015. I have an install video linked that shows the install of both of these parts as well.
view full answer... - Recommended Replacement Motor For Landing Gear With Atwood 75721It sounds like the clutch in the motor may be failing on your Atwood landing gear. It may be slipping which is causing the clicking sound. Since you said helping the motor with the manual crank helps the gear box will not be the problem. The replacement motor you need is part # LG-142178. This will attach directly to the gear box you have and would be a great fit. I called my contact at Atwood and they told me the legs of the landing gear are what the weight capacity is based off of...
view full answer... - Troubleshooting Clicking Landing Gear on RV After New Landing Gear MotorThe load clicking is most likely an insufficient ground for the landing gear motor or that the amperage draw for the landing gear is greater than what the power source can handle. Or it is that you are overloading the weight capacity of the landing gear. Most likely it's just a bad ground though.
view full answer... - Replacement 5th Wheel Trailer Landing GearYour part 125340 refers to a Stromberg Carlson landing gear kit. In case you want to service this unit we do offer the replacement motor # LG-142178 and replacement gear box # LG-179015. For an upgrade I suggest the dual-motor 12K-rated Ultra-Fab kit # UF17-943010 or the similar 8K-rated Reese # RP500708. Both provide 36-inches or more of lift. A highly-rated dual-motor system will work with less strain and should provide trouble-free service for a long time.
view full answer... - Troubleshooting Slow Landing Gear on a 2009 Keystone MontanaSlow landing gear is usually the result of the following issues: 1. low battery voltage 2. bad ground for the jack motor 3. lack of lubrication on the jack screws and pinion gear Your motor could be the culprit, but if it were me I would check the above mentioned items before replacing the motor. To pick out a motor, I need to know the landing gear brand. The replacement motor # LG-142178 could work as it is confirmed to fit Venture, Atwood and Lippert landing gear. Let me know if you...
view full answer... - Difference Between LG-142178 & LC142178 Landing Gear MotorA follow leg cannot be converted to a lead leg with the repair kit; and the only difference between the Lippert Venture 5th Wheel RV Landing Gear Motor # LC142178 and Replacement Motor for Stromberg Carlson Electric Landing Gear # LG-142178 is manufacturer branding. Otherwise, these are the exact same motor so definitely go with the least expensive one.
view full answer... - Replacement Motor and Gearbox for Atwood 75721The Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs item # LG-142178 you were looking at is the correct replacement motor for the discontinued Atwood 75721. The Gearbox for Venture Electric 5th Wheel RV Landing Gear Assemblies item # LC276602 is the replacement for the Atwood 75721 and is made of aluminum.
view full answer... - Replacement Leveling Leg for 2009 Keystone Montana RVI spoke with Lippert and according to them they have a custom set of replacement legs made specifically for the Keystone Montana RV Line. The specific OEM replacement legs for the Keystone Montana's are Follow Leg # LC178652 and the Lead Leg # LC178653. Because of their unique designs they will be the only ones that fit the Montana. The # LG-179014 will not be a replacement that will work for you. It is important to note that for the Keystone Montana the replacement motor will be # LG-142178.
view full answer... - Need To Replace a M-9000-PK Landing Gear Motor On A 2011 Crossroads RushmoreThe M-9000-PK part number you have means you have a Venture motor. Typically this will be rated to 5,000 pounds and do wear out over time as well. With that being said, the Heavy Duty 6500-pound rated Tuson Landing Gear Motor # LC196308 should get you up and running better. The motors for these are pretty universal and I have confirmed this will replace your current motor a few times, so I can definitely recommend it as a good replacement.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
9/22/2023
I would suggest checking the ground connections. Sometimes that is the cause of slow moving landing gear motors. Another possibility is the battery power is low, and third is that maybe the jack screws and pinion gear need lubrication. If there are no odd sounds coming from the motor, then it is likely one of the first two issues.