Can Lippert Motor be Used to Replace Atwood Landing Gear and Motor 75721

Question

Question:

I was told by Liebert and stromberg-carlson that their motor and gearbox is will not work on Atwood. Can you explain your claim of that they will

asked by: Sam A

0

Expert Reply:

I reached out to my contact at Lippert who said that replacing the motor alone with a Lippert motor like part # LG-142178 or # LC141893 wouldn't work but if you replaced your Atwood gearbox with the Replacement Gearbox # LC276602 then you can definitely keep your current landing gear legs. I'm not sure who you spoke with at Lippert but this is something that we've been told by them for a while now and I called them again just to make sure that nothing had changed (and it hadn't).

expert reply by: Jon G

0

Answer 1

We've checked in the past and have been told the only current landing gear motor that can be used with your Atwood setup is the part #LG-142178 which even having a lower capacity will still do a great job. The jack motor doesn't support the…

view full answer...

Answer 2

The price difference does seem backwards, but the faster speed part #LG-141893 has the same weight capacity as the lower speed part #LG-142178 that you also referenced. It's a difference of 5,500 RPM and 7,140 RPM so you would definitely see a…

view full answer...

Answer 3

Thanks for reaching out! While we don't carry that specific brand, there are some common operations between dual two-stage regulators so I'll be able to shed some light onto the subject for you. When using a two-propane tank setup you'll…

view full answer...

Answer 4

From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. You can use a motor that is rated for a higher capacity, like our replacement motor #LC142178 for Ram landing gear which is rated at 8,000 lbs. Just keep…

view full answer...

Answer 5

If the replacing the gear box didn't fix the problem, then as long as the internals of the legs themselves are still in good shape replacing the motor would be the next logical step. Before doing that, I'd use the crank to operate the landing…

view full answer...

Answer 6

The Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs item #LG-142178 you were looking at is the correct replacement motor for the discontinued Atwood 75721. The Gearbox for Venture Electric 5th Wheel RV Landing Gear…

view full answer...

Answer 7

Yes you can just purchase the motor, in this case for your Lippert Model 1-065-041012-01, would be the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. This motor has a maximum load capacity of 5,000lbs and is rated for…

view full answer...

Answer 8

I recommend the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893 for your 2017 Keystone Carbon 327 5th Wheel Toy hauler. This motor is rated for 5,000lbs of capacity and turns at 7,140 RPM's. The Lippert 5th Wheel RV…

view full answer...

Answer 9

I reached out to my contact at Lippert and since your landing gear motor is blowing a fuse as soon as it sees load he mentioned the issue is more than likely that the motor is not getting the correct voltage, with the less common cause being the…

view full answer...

Answer 10

Per conversation with Lippert, the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893 is a compatible replacement for the 1-065-041012-01 electric motor you listed.

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Can Lippert Motor be Used to Replace Atwood Landing Gear and Motor 75721

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching