Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear
(17 reviews)
Price: $225.71
Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear
Retail:$492.81
Our Price: $225.71
You Save: $267.10
In Stock
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (17)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Bulldog
Replaces the dual-output motor for your Bulldog electric fifth-wheel landing gear (BD500161 or BD500170).
Features:
- Replaces the dual-output motor for your Bulldog electric 5th-wheel landing gear (BD500161 or BD500170)
- Includes: 1 replacement motor
Fits:
- Bulldog electric 5th-wheel landing gear: BD500161 and BD500170
500359 Replacement Dual Output Motor
Item # BD500359
Installation Details
Video of Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Bulldog Replacement Electric 5th Wheel Landing Gear Dual Output Motor - BD500359
Hi, there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Bulldog replacement dual output motor. This is going to replace the dual output motor for your Bulldog electric fifth wheel landing gear. This will work for both the 7,000-pound capacity set and 10,000-pound capacity set. And because this is a direct replacement from Bulldog, you can trust this is going to be exactly what you need.
You're not gonna have to worry about fit issues or compatibility problems. It's gonna mount right in place of the original and plug right in just like the original did. So it is going to be what you need to get that fifth wheel landing gear setup operational again. So that completes our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching..
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear - BD500359
Average Customer Rating: 4.9 out of 5 stars (17 Customer Reviews)
Replaces the dual-output motor for your Bulldog electric fifth-wheel landing gear (BD500161 or BD500170).by: Randall12/17/2018
I have used the Bulldog jacks for my RV for about 2 or 3 years. I have a 36 ft 5th wheel and although I had a failure in the motor, the company warrantied them and sent me Replacements without much ado. I was required to pay return shipping which can be a little pricey for a heavy item for the both motors it was $30 but I'm happy to have two brand new replacement motors and that's not too much to pay. I would have a good review for this product.
by: Steve D.06/26/2018
I noticed one of my landing gear motors was slower than the other and making an unhappy noise. Etrailer had it in stock and sent it right out. The part arrived damaged. I called them up and was pleasantly surprised by the outstanding customer service. A replacement arrived quickly. These folks are serious about their business and customers! I will not hesitate to order from them when I need RV parts.
by: Jeremy06/19/2019
This small unit is very strong, I actually integrated this gear motor to a side mount jack for a camper. I had some custom shafts made to be able to join the two units. Works like a charm. With this motor on a real jack, the junk scissor jacks that come on a camper are now gone. 4 of these setup on my design actually will pickup the entire camper (9,000 lbs).
by: Mike 05/26/2021
Works great! Ordered another one for the other side a month ago.
by: Edward12/08/2017
Excellent service, and the motor/gearbox arrived in short order. Overall a very good experience!
by: Warren01/03/2018
Super fast delivery. Very helpful Michael was in getting the part to us ASAP.
by: Mike 06/21/2021
Expensive but worked
by: Dave08/20/2016
Works great so far. Just what I needed. Thanks!
by: Rick 10/30/2021
Works great
by: Russell09/07/2019
Great product, bought to use as a spare but have had no problems with the initial purchase. Love the separate motors for each jack.
by: Mike09/14/2018
On time and correct part!! Great services!! Thank you!!
by: Stacie08/04/2023
by: Tim 09/18/2019
Great product and fast shipping!
by: Jim 07/31/2023
by: Jaime05/30/2022
by: James05/30/2022
by: Terence 03/03/2021
17
17
See what our Experts say about this Bulldog Accessories and Parts
- Replacement Motor for Bulldog Landing Gear Motor 1046104I have a solution for you, but the # BD1046130-00 is designed for a single speed electric jack. To replace landing gear with the motor 1046104 you'll want to use the Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear # BD500359. This is the exact replacement part for your landing gear and was confirmed by my contact over at Horizon Global, who own Bulldog.
view full answer...
- Bulldog 12000 lb Powered Electric Jack Replacement MotorTo replace just the motor for your 12000 lb Bulldog single-speed jack (like # BD182815) you will just need motor # BD1046130-00. I've attached a video of the motor being installed for your convenience. To replace the dual-output motor for Bulldog electric 5th-wheel landing gear (like # BD500161), use part # BD500359.
view full answer... - Bulldog Jack Motor Replacement CapacitiesThe Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear # BD500359 that you referenced has a high and low speed on it. The higher speed is for jacking a trailer up quicker and the lower speed has more leverage over the trailer's pin weight which means it's not working quite as hard. It just moves slower. The kit this motor fits gives you a 10k capacity. There isn't a higher capacity jack motor for this setup available. If instead you were referring to the part #...
view full answer... - Solution for Needing Replacement Motor for Fulton Trailer Landing GearI did some checking and the Fulton line of landing gear was discontinued in 2000 and there are no longer any replacement parts listed for it. I wish there was just a motor kit I could recommend for you but you'll have to look into a new set of powered landing gear. For a replacement we have the Stromberg Carlson part # LG-4 which will match the bracket dimensions you have now and has a 6,500 lb capacity which means it will raise and lower your trailer quickly and last a long time due...
view full answer... - Replacement Landing Gear For Bulldog 1082816-83 When Screw Head Broke Of Jack LegThe replacement inner lift tube BD84FR has recently gone inactive and is no longer available from Bulldog. With this I recommend replacing your landing gear with the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. I prefer this over a typical landing gear set as each jack has its own motor connected directly to the jack. This allows you to raise and lower each jack individually.
view full answer... - Powered Bulldog Jack/Motor Recommendation for a Farm ImplementIf you have a set of 12k capacity Bulldog landing gear on your farm implement you could use the # BD1824200100 as a motor if the jack is single speed, or part # BD1824180100 if the jack is 2 speed. This would be a solution if the implement has a gooseneck style of coupler. If you have an A-frame trailer you would need to upgrade the current jack to a part # BD500187. The motor of the # BD500161 is available separately, part # BD500359. However, this can't be modified to fit a non-powered jack.
view full answer... - Can Replacement Motor for Bulldog Electric 5th Wheel Landing Gear # BD500359 Be Exposed to RainLanding gear motors like the Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear # BD500359 that you referenced were designed to withstand rain and snow as they install on the outside of a trailer. You would not need to build a covering for the motor. If you can limit exposure to water it wouldn't hurt but it's not something that will fail the first time it gets rained on.
view full answer... - Bulldog Dual Output Motor 500359 Speed and Compatibility on Custom ApplicationThe Replacement Dual Output Motor for Bulldog Electric 5th Wheel Landing Gear # BD500359 is 7.75 x 6.50 x 4.75 Inches. The speed of the motor is either 45 RPM or 60 RPM on high speed which on high speed will give you 9 inches of lift per minute. The compatibility is actually a difficult question as the Bulldog system has been discontinued but replaced with a similar Reese System. The Reese Electric 5th Wheel Landing Gear Set - 36" Lift - 8,000 lbs # RP500708 is the complete landing gear...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Isabelle B
Written by:
Wilson B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.