Replacement Motor for Atwood 75722 Gear Box

Question

Question:

Is there a replacement motor that matches the 75722 gear box?

asked by: Jeff

0

Expert Reply:

Yes, the replacement motor that you need is part # LG-142178. Please note that you will need to swap out your gear box as well because the gear ratios are different. This replacement motor will fit the gear box # LG-179015 which is a replacement for the 75722 that you have.

expert reply by: Jon G

0

Answer 1

That's an older part number but the Atwood gear box part #LG-179015 would be what you would need. This is a fit for Atwood Standard Duty, Heavy Duty, and Super Duty 5th Wheel Landing Gear which would include what you have. The 12-volt…

view full answer...

Answer 2

Yes, but the replacement motor we currently carry for your Atwood landing gear is part #LG-142178.

view full answer...

Answer 3

The replacement motor part #LG-142178 can be used as a replacement for Atwood landing gear. It would be a really simple replacement that would bolt right up. Since you're a mechanic this would be a super simple install compared to what you…

view full answer...

Answer 4

The Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs item #LG-142178 you were looking at is the correct replacement motor for the discontinued Atwood 75721. The Gearbox for Venture Electric 5th Wheel RV Landing Gear…

view full answer...

Answer 5

The 12-volt replacement motor for the Atwood 75722 motor is part #LG-142178. This motor is 12-volt and has a lift capacity of 5,500 lbs. The motor has an overall height of 8-1/2 inches.

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Replacement Motor for Atwood 75722 Gear Box

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching