Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
(120 reviews)
Price: $9.37
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (120)
- Q & A (0)
- Videos (1)
- Photos
Kodiak Accessories and Parts - K12WB2
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- Drive-In Stud
- Kodiak
- 1/2 Inch Diameter
- 2 Inch Long
Wheel stud is designed for Kodiak integral hub-and-rotor brake assemblies. Bolt is 2" long and has a thread size of 1/2"-20 UNF-2A.
Features:
- Application: 1-piece, hub-and-rotor brake assembly
- Spline diameter: 0.54"
- Spline length: 0.42"
- Threaded length: 1.46"
- Thread diameter: 1/2"-20 UNF-2A
- Base length: 0.54"
- Stud length: 2"
ROTOR/HUB-LB2.0 Kodiak 2" Long Wheel Stud - 1/2" - 20 UNF-2A
Video of Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Kodiak Tires and Wheels K12WB2 Review
Today we're going to look at the Kodiak replacement drive-in trailer hub wheel stud. It's a half-inch in diameter and two inches in length, and it's a quantity of one. Now, this half-inch stud is designed to replace a damage wheel stud on your trailer hub. The raised spline portion right down here of the stud is what will be driven or pressed in to your trailer hub. This stud is what will go through the bolt hole on your trailer wheel. When used with a wheel lug nut, will hold your tire and wheel to your axle. These are stamped as a grade-eight bolt.
The thread end size, again, is half-inches by 20 threads per inch, and uses a standard half-inch by 20 lug nut. I happened to pull one of those lug nuts like this one right here, and you can see they just screw right on to the end once you put your wheel and tire assembly on, you just put your lug nuts on and torque them to the correct specs. Just to give you the measurements the overall length which you measure from the bottom of the head to the very end of the bolt, you can see is right at two inches. The threaded portion is right at about one-and-a-half inches long. Then, the spline diameter is going to be .54 inches. That should do it for the review on the Kodiak replacement drive-in trailer hub wheel stud, half-inch diameter by two inches in length for a quantity of one..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long - K12WB2
Average Customer Rating: 4.8 out of 5 stars (120 Customer Reviews)
Wheel stud is designed for Kodiak integral hub-and-rotor brake assemblies. Bolt is 2" long and has a thread size of 1/2"-20 UNF-2A.by: Big J02/11/2024
The correct wheel studs.
by: Kristin 01/23/2024
On time shipping. Product was as descr ibed.
by: Barton04/23/2023
Not happy with the chat person at all. I asked for specific dimension for the knerlining and He did not know what I was talking about.Said he only had length and diameter. He even argued with me when I asked for a supervisor. To my surprise a supervisor contacted me the next day and READ the chat too. That really surprised me. AND he came in with a almost prefect match to my request in the chat. Kudos to John H. I did get the Stud in a timely manner and it appears to be what I ordered.Hope it drives in OK and lasts. John H got back to me and said he would share my concerns about attitude and product training with the chat supervisor.
by: Jeff 03/10/2023
I think they would work just wonderful for securing wheels to a wheel hub. I purchased them just because they are a beautiful gold color. It was like getting a bag of gold in the mail.
by: David 01/28/2023
Almost exact match just the spline area is slightly longer but that does not impact install or functionality. length and diameter are perfect for my standard 6' by 14' single axle trailer on the 5 bolt hub.
by: Bill 07/05/2023
Easy to do business with
by: Gary 10/25/2022
Very good phone service, and no problems after a year.
by: RussF03/30/2015
Recieved all of my items( wheel assemblys, chrome lug nuts and studs) and upon first inspection it looks like everything is top notch in regard to fit and finsh. I will update when I get the time to complete the work on my trailer. Price was excellent for the quality of the items.
by: Gary C.10/30/2013
I am refurbishing my 20 year old boat trailer. I had to destroy several of the wheel lug bolts in order to remove the wheels from the hubs. I had a hard time finding replacement bolts. ETRAILER.COM HAD WHAT I NEEDED! I received the bolts in very timely manner! They installed and worked perfectly!
Thanks ETRAILER.COM. I now know where to go for trailer parts
by: Thomas05/05/2016
Everything I have ordered has been great and delivered on time. The pricing is very competitive and I would definitely order from etrailer again. I was extremely impressed with the LED lighting. Thanks, TOM
by: Thomas05/05/2016
Everything I have ordered has been great and delivered on time. The pricing is very competitive and I would definitely order from etrailer again. I was extremely impressed with the LED lighting. Thanks, TOM
by: SteveO01/16/2016
Another product that I purchased for my 10K lb trailer build. These studs will be used to mount my spare tire to the trailer. Quality looks to be pretty good.
by: Johnny 08/25/2022
Still holding wheel on the boat trailer
by: Richard 12/06/2021
as descried and on time shipping
by: Donald11/15/2017
The wheel tire and wheel bolt and nuts have preformed very well, no problems
by: Jim D08/26/2020
The lug I was looking for fit our trailer wheels. Exact replacement.
by: Paul 12/13/2016
Every item I ordered worked and fit exactly as I had hoped it would. Prices and shipping was top notch and will definitely buy from e-trailer again.
by: Brent08/13/2014
What can I say, The site was easy to navigate and the wheel studs I found were a direct match to the ones on my particular trailer. They were shipped very quickly and took only a couple of days to be delivered. I've bookmarked this site for future trailer needs!
by: Nick03/29/2018
These wheel studs fit my oddball trailer hub perfectly. The guys at etrailer were a huge help in finding the correct parts as well.
by: Mike F07/24/2015
Perfect replacement lugs (springs and hardware) for my trailer wheel rotors.
by: Don10/11/2016
I had a hard time locating this part and searched several websites and manufacturers before finding it one etrailer.com. I have purchased other items from this supplier and have had good luck with all of it.
by: Jerald B.06/03/2014
Great product! I ordered what I thought was the right size, but the spline is a hair too small... I got exactly what I ordered, I just didn't measure right.. I need to get real calipers LOL.. No plan to return them because I'm sure I'll need them one day. Fast shipping and I'm satisfied!
by: Ken03/04/2017
Ordered lug bolts and nuts to repair a 20 year old drum. Good prices, fast delivery, my trailer is back on the road. Replacing the bolts as opposed to the drum saved $50 or so dollars
by: Margaret Freeman11/02/2017
Thanks for shipping my order so quickly both times. The first time I ordered the wrong size, but the one that I got today was just what we needed for our camper. Thanks for you quick shipping on both orders. We are keeping you email address in case we need anything else.
by: Mark S07/13/2017
Lugs and nuts fit perfectly.
Could not get them locally but etrailer web site gave measurement instruction to insure ordering the right parts.
25
120
Show More Reviews
See what our Experts say about this Kodiak Accessories and Parts
- Replacement Wheel Stud Recommendation to Replace a 2 inch Long Stud that is 1/2 inch DiameterIt sounds like you are looking for the part # K12WB2 as it fits the description you listed. You can check out the measurement picture I attached and compare it to what you have to be sure.
view full answer...
- How Long Do My Lug Studs Need to be on Dexter 2200-lbs AxlesI'll start by saying that without knowing which hubs are on those axles, it's tough to know exactly which lug studs are on them, but I was able to research and determine that the studs are normally 1.8" long. Taking this into consideration, you're going to need studs that are at least 2.3" long to make up for the added space between the hub face and wheels. The Kodiak Wheel Bolts # K12WB2 are only 2" long, so these are not going to be sufficiently long enough. I recommend using the Replacement...
view full answer... - Replacement Wheel Studs for 13 inch Kodiak Hub/RotorsFor 1/2 inch wheel studs for Kodiak hub/rotors we have the Kodiak wheel stud part # K12WB2 which is what you'd need.
view full answer... - Recommended Replacement 1/2 Inch Wheel Stud for a Boat Trailer Hub w/ Lug Nuts
For your Snowco boat trailer the closet wheel studs we have for your requested dimensions are the Kodiak Wheel Bolt item # K12WB2. These wheel studs have a thread size of 1/2"-20 UNF-2A. The spline is .42". I have linked a diagram below that will show you a detailed measurement of this wheel bolt. For lug nuts you will want the CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1 item # CE11051.
view full answer...
- Replacement Wheel Bolt or Replacement Hub for Haul Master 90145 Utility TrailerFor your utility trailer, I recommend pulling one of the studs and measuring for fit. I've linked the picture measuring the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2 for reference. You will need to use a digital caliper like # PTW80157 to get the precise measurements. Your other option is to pull your hub and get the bearing numbers and seal number from your hub for a replacement hub. If you can't find the numbers printed on the face of your bearing you can use that digital...
view full answer...
- Replacement for 1/2"-20 Wheel Bolt Measuring 2" Long and Just Over 1/2" Spline DiameterThe closest thing we have to what you're needing is the Kodiak Wheel Bolt # K12WB2 which is a 1/2"-20 bolt measuring 2" long and has a 0.54" spline diameter so it will work well for your application.
view full answer... - Replacement Wheel Stud for 2006 Boat Trailer with Disc BrakesWe do not have the obscure replacement stud you are seeking. The Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2 will meet your measurements with the exception of spline and base length, so it will fit but won't be quite as strong as your previous wheel stud. This is the closest fit we carry.
view full answer...
- Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer HubIn order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to know the length of the threaded area of the stud, the length of the splined area and the diameter of the portion that's driven into the hub. In the case of the Kodiak # K12WB2 wheel stud you mentioned, the diameter of the splined area (portion driven into...
view full answer...
- Replacement Wheel Stud Needed For 2012 Karavan Snowmobile TrailerI can get you the replacement wheel stud. If you need a drive in 1/2 inch stud, we have the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long, # K12WB2. If you have the screw in 1/2 inch stud, we have the Replacement Wheel Stud, Screw-In, 1/2" x 2", # 25-53. If you need the replacement 1/2 inch lug nut, I suggest # CE11051. I've attached a link to our page on wheel studs. If you have more specific measurements to fit, let me know and I'd be happy to help.
view full answer... - Replacement 1/2 Inch Wheel Stud for a Boat Trailer HubBased on the measurements you have provided it sounds like you have pretty standard wheel studs. Kodiak stud # K12WB2 is nearly spot-on as far as the measurements. I have included a picture showing its measurements for you.
view full answer... - Replacement 1/2" - 20 Wheel Stud OptionsWe have a few different lengths under the 1/2" - 20 wheel stud size so you'll wan to measure the length of what you currently have before ordering a replacement. 1-11/16" Long # K12WB169 1-7/8" # RG03-060 2" Long # K12WB2 2.24" 7-150 2-1/2" # 165995 2-11/16" Long # 7-262 2-3/4" # RG03-080 If you don't see your size you can also go a bit larger and use an open-ended lug nut.
view full answer... - How to Choose Replacement Lug Bolt or HubThanks for the photo; I can't say for certain if the lug can be replaced or not, but in order to find the correct replacement all you'd need to do is measure. For example, the Kodiak Wheel Bolt # K12WB2 is for Kodiak integral hub-and-rotor brake assemblies with a 2" stud length, 0.42" spline length and a 1/2"-20 UNF-2A thread. I will leave a link below to our entire selection of replacement bolts. If it turns out you can't replace just the bolt you'll need to replace the hub. To do this...
view full answer...
- Wheel Stud Size on Trailer Hub # AKIHUB-545-2-1KThe trailer hub part # AKIHUB-545-2-1K that you referenced uses 1/2 inch wheel studs like the part # K12WB2 has a thread size of 1/2"-20 UNF-2A. This means 20 threads per inch and 1/2 inch diameter.
view full answer... - Replacement Wheel Studs For 2013 Puma Canyon Cat Travel Trailer We have replacement studs and hubs. You'll need to take some measurements of the lug stud like the dimensions on the attached picture of the Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2. This will help us to get you the right one. If you need the replacement hub, we will need measurements or bearing numbers. I've attached an article to help.
view full answer...
- Can Wheel Studs on Trailer Axle Be ReplacedYes, the studs on trailer hubs are replaceable. You'd need to know the diameter of the stud you'd be replacing as well as the length. I attached a link to a page that has all of the studs we offer. The most popular stud replacement we offer is the part # K12WB2 which is 2 inches long and 1/2 inch in diameter.
view full answer... - Replacement Bearings, Races, Seal, and Studs for Trailer Hub 008-479-05The stud replacement you need for the 008-479-05 is the part number # K12WB2. The seal you need is # GS-2125DL, bearing # 14125A, race # 14276 and bearing # 25580 and race # 25520.
view full answer... - 2 inch Long Wheel Stud Recommendation for Boat Trailer that is 1/2 inch in DiameterI believe what you are looking for is our part # K12WB2. This has a thread diameter of 1/2 inch, a spline diameter of .54 inch (I know you said .56), and is overall 2 inches. This is our closest option and is a very standard stud seen for trailer hubs so I'd be surprised if this wasn't exactly what you need.
view full answer... - Head Size for 1/2" Kodiak Wheel BoltThe diameter of the 1/2" Kodiak Wheel Bolt # K12WB2 is 0.70" according to my contact at Kodiak.
view full answer...
- Replacement 1/2 Inch Wheel Bolts For A TrailerWe do have a few 1/2" wheel options like the Trailer Wheel Bolts # RG02-020 you inquired about. Alternatively we do have the Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long # 7-262, and the Kodiak Wheel Bolt # K12WB2. If you let me know more specifically what you need I can assist you further.
view full answer... - Replacement Wheel Studs and Lug Nuts for a 2011 Crossroads Cruiser 5th Wheel TrailerThe first thing to check is if the hubs have studs that are driven in or that are threaded in. Stud # K12WB2 is a drive-in type so if you have ones that thread in it would not work. If they are drive-in then you will want to check the picture I have included that shows all the measurements to determine if they will fit properly in the hub. This stud takes a 1/2"-20 lug nut such as # CE11051. This is an open-ended lug nut so the additional length of the studs would not be a problem. Or...
view full answer...
- Availability of 1/2-Inch Diameter Replacement Drive-In Wheel Stud for Hub on Utility TrailerThank you for providing the photo and dimensions for the replacement drive-in wheel stud you need for the hub-and-rotor brake assembly on your utility trailer. I have included a link to our main page for all available drive-in-type wheel studs. Based on the dimensions you provided the nearest item is # K12WB2 from Kodiak. This stud has a 1/2-inch diameter, 2-inch length and a fine thread size of 1/2-inch-20 UNF-2A. The matching lug nut, if needed, is part # CE11051.
view full answer...
- Availability of Replacement Wheel Studs for AL-KO 8490 DrumThe studs on your AL-KO drum should have a 1/2" diameter like the Kodiak # K12WB2 but you will need to filter through the attached link of wheel bolts to find the one that matches your stud length. These are filtered by total length but you can click on each individual page to see the length of the threaded portion to match your application.
view full answer... - Replacement Stud or Hub/Drum for Broken Stud on Trailer HubYou might be able to get away with it for a while, but I cannot recommend driving with a broken stud on one of your trailer hubs. Fortunately we do offer both replacement studs and new hubs. I linked our main page for hub/drum parts such as drive-in and screw-in wheel studs like # K12WB2 and # 25-53. I also linked our page for hub/drum assemblies in case you prefer to simple replace the bad hub. Be sure to confirm your wheel bolt pattern (there are several 5-stud bolt patterns - please...
view full answer... - Correct Wheel Stud and Lug Nuts for 15 inch Aluminum Trailer WheelThe Karrier ST225/75R15 Radial Trailer Tire with 15" Aluminum Wheel # AM32669 fits 1/2"-20 bolts so you'll need something like the Kodiak # K12WB2 which is 2" long. It's best to compare this stud length with what you currently have to ensure everything fits properly. Attached is a photo with the dimensions for you to check out. For a lug nut I recommend the Kodiak Stainless Steel # KALN1375S which is longer so that it will fit properly with the aluminum wheel that you have.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard G.
12/6/2022
very good no issues at all