Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1

See what our Experts say about this Lionshead Accessories and Parts

• Lug Nuts that Fit Malone MicroSport Trailers
  Yes the lug nuts # LHLR103 that you referenced are a fit on the Malone MicroSport trailers.
  view full answer...
• Picking Out Lug Nuts for 2018 Van Leigh 365RL
  I looked up as much as I could on your 2018 Van Leigh 365RL Vilano and wasn't able to get the exact size. It's either going to be 1/2 inch or 9/16 inch based on what I was able to find on the bolt pattern. For 9/16 inch we have the part # LHLR110 and for 1/2 inch we have the # LHLR103.
  view full answer...
• Is Goodyear Endurance ST255/85R16 Trailer Tire & Wheel Lug or Hub Centric
  The Goodyear Endurance ST255/85R16 Radial Tire with 16" Viking Aluminum Wheel # 724862519AT is a lug centric tire and wheel combo, which fits hubs with 1/2"-20 or 9/16"-18 wheel bolts and you can secure with the Lionshead Trailer Wheel Lug Nut - 1/2"-20 # LHLR103 or 9/16"-18 # LHLR110. In regards to balance, trailer tires do not come balanced, and though you can have them balanced if you wish, it isn't something that is necessary for performance so long as your tow vehicle tires are balanced....
  view full answer...
• Replacement Lug Nuts for Palomino Columbus 2014 320RS Fifth Wheel
  We have the exact size you are looking for with the Lionshead Lug Nut # LHLR103 which is for a 1/2 inch diameter wheel stud and has a 3/4 inch outer diameter. I would not recommend the lug nuts you referenced as they most likely would not fit into the the wheel holes and still allow a wrench to fit on it.
  view full answer...
• Are the Kenda AM30120 Hubcentric or Lugcentric Wheels?
  The Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel # AM30120 are lugcentric wheels with a 2.5" hub bore hole. You will want to continue using the acorn style lug nuts with these wheels to help keep them snug since your 56mm hub bore is going to be slightly smaller than the 63.5mm (2.5") opening on the # AM30120. This is going to be the smallest hub bore wheel we have available in this bolt pattern. If you need a new set of lug nuts, you can use the Lionshead Trailer Wheel Lug Nuts...
  view full answer...
• Determining Lug Nut Size for 14 Inch Trailer Wheel
  For a 14" trailer wheel you're most likely looking at a lug nut that threads onto 1/2"-20 lug bolts such as the Lionshead # LHLR103. With that being said this is going to be more dependent on the hub than the wheel itself so I definitely recommend verifying this. The best way to do this is to simply remove one of the existing nuts and take it up to a local hardware store. They should have various bolts that you can test fit the nut on to determine the thread pitch and diameter it works with.
  view full answer...
• Westlake Tire & Silver Mod Wheel That Fits 5-Lug Trailer Hub
  A wheel with 8 lugs will not fit your trailer hub with 5 lugs. The correct fit for the Westlake tire and silver mod wheel for a 5-lug hub is the following: - Westlake ST205/75R15 Radial Trailer Tire w/ 15" Silver Mod Wheel # LHAW121 The # LHAW121 will fit a 5 on 4-1/2" bolt pattern, which is by far the most common 5-lug pattern, but you will want to verify your bolt pattern. If you aren't sure what you have, I have added links below to help articles on how to determine your bolt pattern. This...
  view full answer...
• Lug Nuts and Center Cap for Lionshead Steel Directional Trailer Wheel # 274-000023
  For stainless lug nuts to use with the Lionshead Steel Directional Trailer Wheel # 274-000023 you'd want the part # LHLR103. We don't have any smoked chrome center caps but we do have the chrome # AM90175 as the correct size which would look great.
  view full answer...
• Recommended Replacement Wheel Bolts for a Trailer With M12 Metric Wheel Bolts
  The Lionshead Trailer Wheel Lug Nut # LHLR103 you're looking at will fit on 1/2" wheel bolts, and has 20 threads per inch. If you have metric wheel bolts you'd need to use lug nuts that are also metric or swap out your current wheel bolts with more standard sized wheel bolts like the Replacement Wheel Stud, Screw-In # 25-53 which have the same 1/2" x 20 threads as the lug nuts you were looking at. This would by far be the easiest solution as you're going to have a much harder time finding...
  view full answer...
• Torque for Loadstar Tire With Aluminum Wheel
  I have attached a sheet which shows the torque specs for wheels you can use when putting a tire and wheel. For 1/2" wheel bolts on a 13" aluminum wheel the torque is 75-85 ft.-lb. For lug nuts you can use the Lionshead Trailer Wheel Lug Nut # LHLR103 or Americana Trailer Wheel Lug Nut # AM90049.
  view full answer...
  
• How to Determine Fit of Kenda Karrier Tire and Wheel AM34659
  Yes, we offer a very large selection of RV wheels and tires, and it sounds like you are trying to determine if the Kenda Karrier ST205/75R14 Radial Tire w/ 14" Series T09 Aluminum Wheel # AM34659 will fit your travel trailer. If so, what you need to know first is your trailer hub's bolt pattern. This wheel and tire combo has a 5 on 4-1/2" bolt pattern so that's what your hub would need; if you do not know what yours is I have added a help article which details how you can find bolt pattern,...
  view full answer...
• Galvanized Wheel and Tire With 6 on 5-1/2 Inch Bolt Pattern
  You can go to a smaller wheel and tire, and the smallest option we have for a galvanized wheel with a 6 on 5-1/2 inch bolt pattern and trailer tire is the Karrier ST225/75R15 Radial Trailer Tire with 15" Galvanized Wheel # AM32666. So you will want to take a quick measurement just to verify but this should be perfect for the space you have. This wheel and tire combo has an 8.9" width and 28.4" total diameter and is a very high quality wheel that is galvanized like you were looking for...
  view full answer...
• Recommended Stainless Steel Lug Nuts For A Shorelandr Boat Trailer
  Hey Jeremy, For stainless steel lug nuts I'd go with Lionshead's 1/2" -20 # LHLR103 or 9/16"-18 # LHLR110 depending on the diameter of your wheel studs. You could add in a hub cover but it's honestly not necessary and more so just for looks. The Karrier ST185/80R13 Radial Trailer Tire & Wheel # KE33JR has a 3.19" pilot hole so you'd just need to measure how far that dust cover sits out to see if there's a long enough hub cover to fit.
  view full answer...
• How to Choose Correct Lug Nuts for 16 Inch Wheel
  Thank you for your purchase of the Aluminum Viking Series Valhalla Trailer Wheel # AX02665865HDBML! The most common lug nut size for trailer tires is 1/2" so you should be able to use the Stainless Steel Lionshead Trailer Wheel Lug Nut - 1/2"-20 # LHLR103. The Stainless Steel Lionshead Trailer Wheel Lug Nut - 9/16"-18 # LHLR110 might work but it is less common so I doubt this is what you have. A sure way to know which one you have is to measure how many threads you have in an inch of...
  view full answer...
• Recommended Lug Nut Torque Spec for 16 Inch Viking Aluminum Wheel
  The Provider ST235/85R16 Radial Tire with 16" Viking Aluminum Wheel # A16RGBML is compatible with either 1/2"-20 or 9/16"-18 wheel bolts, the recommended torque specification will depend on which of these two your hub uses. The tire, however, is not a factor. Torque 1/2"-20 lug nuts like # LHLR103, to 90-100 ft-lbs. Torque 9/16"-18 lug nuts like # LHLR110, to 120-140 ft-lbs. I've attached a comprehensive Lug Nut Torque Specifications chart for you as well.
  view full answer...
  
• Recommended Center Cap and Lug Nuts for Viking Series Valhalla Wheel AX02350545BMFL
  The Aluminum Viking Series Valhalla Trailer Wheel # AX02350545BMFL that you referenced actually includes the sleek matching center cap (pictured below) and for compatible stainless steel lug nuts the Lionshead # LHLR103 will work perfectly. This will provide you with an extremely sharp setup on your trailer that's also completely resistant to rust and corrosion. I have attached a couple short video reviews that you can check out as well.
  view full answer...
  
• Lug Nut For 1/2 Inch Trailer Wheel Bolt
  The only lug nut we have that may work is for the .490 right hand thread lug nut Lionshead Trailer Wheel Lug Nut - 1/2"-20 # LHLR103. That would only be if the wheel stud thread was 20 threads per inch. You may consider replacing the wheel studs if you can, just make sure the replacement matches the length and knurl size of what you have. For example the Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" # RG03-080 has is 2-3/4" with a .56" knurl. I have added a link below to...
  view full answer...
• Can Aluminum Wheel Lug Nuts Be Used on Steel Wheels
  I checked with Taskmaster and they confirmed that you can use the same lugnuts from an aluminum wheel on a steel wheel. They recommend 1/2 inch lugnuts such as Lionshead Trailer Wheel Lug Nut - 1/2" # LHLR103 on a wheel like the Provider ST205/75R14 Radial Trailer Tire # TTWA14RWS.
  view full answer...
• Lug Nut Size for 2019 Rockwood Mini Lite 2104S Travel Trailer
  Your 2019 Rockwood Mini Lite 2104S travel trailer uses a hub with 1/2 inch studs such as the Dexter Trailer Hub and Drum Assembly # 84546UC3. So you simply need lug nuts that fit those 1/2 inch studs, the Lionshead Trailer Wheel Lug Nut - 1/2"-20 # LHLR103.
  view full answer...
  
• Replacement Lugs For Malone EcoLight Trailer
  If the studs are okay on the Malone Ecolight trailer # MAL93FR then you can just get these lugs # LHLR103 to replace them. If the studs are ruined, we would have to replace some axle components.
  view full answer...
• Lug Nut Type and Offset of Aluminum Hi-Spec Series S5 Trailer Wheel # AM22323HWT
  Standard lug nuts work with the Aluminum Hi-Spec Series S5 Trailer Wheel - 13" x 5" Rim - 5 on 4-1/2 - Silver Item # AM22323HWT that you referenced. If the trailer has hubs with the very common 1/2-inch diameter the lugs part # LHLR103 would work well. Zero offset is like what you mean. That means the mounting flange is right in the middle of the wheel, so the weight of the trailer is carried equally on both sides of it.
  view full answer...
• PSI Rating of Westlake Tire on Aluminum Wheel
  The tire on the Westlake ST205/75R14 Radial Tire w 14" Condor Aluminum Wheel - 5 on 4-1/2 - LR D - Gunmetal # LH37VR has a maximum psi rating of 65, which will allow it to have its full 2,040 lb capacity. In order to replace your tire with the correct one you will want to go off of two things: its size, which should be on the sidewall somewhere on your current tire (like in the accompanying photo), and its capacity. You will want the combined capacity of your tires to match, or ideally...
  view full answer...
  
• What Style Lug Nut Does The Aluminum Bobcat Trailer Wheel 14 x 5-1/2 LHSJ211G Use?
  The Aluminum Jaguar Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - Gunmetal Gray # LHSJ211G you were looking at take a 60-degree coned lug nut like the Lionshead Trailer Wheel Lug Nut # LHLR103. I included videos of the products mentioned for you to take a look at.
  view full answer...
• What Is The Best Quality One-Piece 1/2" - 20 Lug Nut That Is Also Made In The USA?
  For you I highly recommend the Kodiak Trailer Wheel Lug Nut # KALN1375S. These use the same 1/2" - 20 with a 60 degree cone. They are solid one-piece stainless steel, which will more durable and rust resistant than the chrome two-piece options. Also all Kodiak parts are made here in the USA.
  view full answer...

Do you have a question about this Accessories and Part?