Replacement Wheel Stud Recommendation to Replace a 2 inch Long Stud that is 1/2 inch Diameter
Question:
hello i have a drum on my 25 foot trailer, trail lite 1998. I have an hayes/alco drum al-ko 7230 4 1/2 stud spread, brakes 2 1/4 x 10 inch drum. I am looking to replace some of the lug studs due to bad rusting issues. So far I have found out that it is 1/2 x 20 and 2inch long measuring end to end after removing it. The spline portion that grabs the drum is 1/2 and the thread about inch and 1/4 roughly. Does this give you enough info to narrow down a replacement stud ? Thanks,
asked by: Rob
Expert Reply:
It sounds like you are looking for the part # K12WB2 as it fits the description you listed. You can check out the measurement picture I attached and compare it to what you have to be sure.
Products Referenced in This Question
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Kodiak
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: grease cap 272
- Q&A: Double-Lip Grease Seals to Replace AL-KO Part 363497
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Caps - TRDC-275
- Video: Redline Trailer Bearings Races Seals Caps - Caps - 38605 Review
- Video: Redline Trailer Bearings Races Seals Caps - Caps - RG04-100 Review
- Search Results: trailer wheel studs
- Search Results: wheel studs
- Search Results: wheel stud
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Search Results: hub stud
- Search Results: 7~262
- Search Results: brake shoes
- Shop: Grease Cap 2.718" OD Drive In
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Shop: Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Shop: Zinc Plated Grease Cap - 2.72" Outer Diameter - 1.28" Tall - Drive In
- Shop: Bearing Buddy Bearing Protectors - Model 2717SS - Stainless Steel (Pair)
- Shop: Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long - Qty 1
- Video: Review of Dexstar Tires and Wheels - Wheel Only - AM20428
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Q&A: What Size Trailer Rim Should be Used for a 205/75-15 Trailer Tire
- Video: Kodiak Tires and Wheels K12WB169 Review
- Video: Review of Redline Replacement Trailer Hub Wheel Stud - 165981
- Video: Dexstar Tires and Wheels - Wheel Only - AM20446DX Review
- Shop: Brake Controller
- Q&A: Availability of a Replacement Trailer Wheel for an ST205/75D15 Trailer Tire
- Q&A: How To Choose Tires And Wheels For 1995 Haulmark 20-Ft Enclosed Tandem Car Hauler
- Q&A: Speed Rating for the Kenda Tire # AM10245
- Q&A: Are 5 or 6 Inch Wheels Better for 205/75-15 Size Tires