Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
(26 reviews)
Price: $22.51
In Stock
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
Item # RG03-060
Our Price: $22.51
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (26)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - RG03-060
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- Drive-In Stud
- Redline
- 1/2 Inch Diameter
- 1-7/8 Inch Long
Replacement Trailer Hub Drive-In Wheel Studs
 | ||||
| Thread Diameter (A) | Stud Length (B) | Spline Length (C) | Base Length (D) | Spline Diameter (E) |
| 1/2" | 1-7/8" | 0.26" | 0.52" | 0.54" |
RG03-060 Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
Video of Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Tires and Wheels RG03-060 Review
Today we're going to take a look at the replacement drive-in trailer hub wheel studs. These are 1/2" diameter x 1 7/8" in length, and it's for a quantity of four of them. These 1/2" studs are designed to replace damaged wheels studs on your trailer hub, the raise plus flyings portion right here of the stud, is what will be driven or pressed into your trailer hub. The stud is what will go through the bolt hole on your trailer wheel. When it's used with a wheel lug nut, will hold your tire wheel to your axle. The top of the head is stamped, it's a grade A bolt. Again, the thread size end is a 1/2" diameter, 20 threads per inch, and they use standard 1/2" x 20 lug nuts.
I did happen to pull a standard lug nut, 1/2" x 20 from our warehouse just to show you how it screws on. Once this is installed in your trailer hub, put your wheel up on the stud, put your lug nut on, and then just tighten it down and torque it to the correct specs for your application. Few dimensions on these studs. The overall length, which will be measured from the bottom of the head to the very end, and it's going to be right at 1 7/8". The threaded portion, the length on that is going to be right at 1 1/4". The diameter of the spline, that's the portion that gets pressed into your trailer hub, the diameter of that is .54". That should do it for the review on the replacement drive-in trailer hub wheel studs, 1/2" diameter, 1 7/8" in length and a quantity of four of them..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4) - RG03-060
Average Customer Rating: 4.7 out of 5 stars (26 Customer Reviews)
by: Delton08/12/2023
Perfect fit. Fast delivery and excellent customer service.
by: Pat M05/23/2014
Perfect fit for my trailer. The folks ate trailer where very helpful. Ordering wheel studs can be difficult to get the size correct and terai lee made it very easy.
by: William02/19/2019
Great product and the size chart was spot on. Picture matched the product. My boat trailer is a 2010 Bass Tracker NITRO.
by: Nichelle09/20/2021
Very good quality , way better than original with one
Exception , the spline length on these is not very good, but they
Should hold . But in there defense these are not meant for my camper
So there's that, had to grind the heads a tad to fit in hole.
by: John04/01/2019
Brought product for a trailer rebuild. Product came as described and seems like great quality. Best part was the customer experience by etrailer, great communication on where my order was and it shipped the same day even though I ordered at about 5pm cst! Will buy from here again.
by: Rich07/04/2016
Perfect fit. No installation problems even with older rusted and broken studs
by: David05/29/2016
They were an exact fit for my '05 Coachman/Viking pop-up camper.
by: Snoman11/04/2016
These studs fit my Blizzard sled trailer perfect. I was able to pick them using the dimensions provided. Shipment arrived FAST.
by: Merle W.06/15/2015
Shipping was fast.
by: Rick05/05/2018
Great product and great price. thank y ou.
by: Har04/26/2021
Got just what I ordered..
Har
4/28/2022
Works as should. Good fit and no issues
by: Kyle 08/02/2020
Excellent product, it was not a 100% match to my old ones but they were very close and worked well with no issues.
by: Howard owner Hurricane Auto08/16/2013
packaging does not line up with needs. Should be packaged in set of 5.
by: Mark02/13/2013
Sized a bit longer than needed, but worked fine.
by: t. wilkes09/21/2016
everything was good
by: Chris08/14/2018
Right size. The sizing charts helped a lot. Can't guess on these. Too many sizes.
by: Harold05/22/2021
Just what I needed
by: Kenneth03/22/2022
Fit perfectly
by: Gary 03/29/2012
Exactly what I needed, quick shipping and excellent customer service and order status notifications. Thank You
by: Leslie 12/16/2020
They fit!
by: Steven 05/10/2021
by: Jim09/10/2013
good value
by: Vitaliy09/22/2023
by: Ed11/04/2022
by: Dave 02/15/2023
25
26
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Replacement Wheel Studs For 2021 Sun Tracker Pontoon Boat Trailer With 1/2 Inch Stud 1-7/8 Inch LongIt sounds like the Kodiak Wheel Bolt # K12WB2 is going to be the closest we have to your wheel stud. This stud has a spline diameter of 0.54", spline length of 0.42 and a length of 2". The Wheel Stud # RG03-060 you found while having the same 1-7/8" overall length and 0.54" diameter spline has a spline length of only 0.26 so there is a greater chance of the stud turning inside the hub with the shorter spline.
view full answer... - Replacement Wheel Lugs With 1/2" Diameter For Trailer 10" DrumsI believe you are trying to find wheel studs to be pressed into your hubs. There are two bolts that are similar to the specs you provided. The Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1 # 7-122 has overall length of a little over 2", the length minus the head is 1.99", spline length is .62", and spline diameter is .61". Another possible option is Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4) # RG03-060 which has overall length of about 2",...
view full answer... - Replacement Stud Recommendation for Hub 34822BXIf your hub is the part # 34822BX the correct replacement studs are part # RG03-060.
view full answer... - Wheel Studs and Chrome Lug Nuts Recommendation to Replace 2002 Tracker Trailstar StudsBased on the dimensions you listed it looks like the part # K12WB2 is the closest match. This might be slightly longer but should still work. I attached a picture that has all of the dimensions listed. For chrome 60 degree lug nuts you would then want the part # 12CLN.
view full answer...
- Replacement Wheel Studs for CE Smith Trailer Multi Sport Boat TrailerThe correct wheel studs for a CE Smith trailer # CE48810 would be the part # RG03-060. The axle capacity is 800 lb.
view full answer... - Replacement Wheel Stud Recommendation for a Trailer Hub that Takes Bearings L44643Most likely the studs you would need are the part # RG03-060 which is what the hub part # 8-91-05UC1 takes that has the two bearing numbers you listed. Since I don't know what hub you have for certain though it's hard to be totally sure. The hub I referenced is a very popular option though.
view full answer... - Replacement Wheel Studs for Trailer Hub part # 8-173-16UC3The trailer hub part # 8-173-16UC3 uses 1/2 inch diameter 2 inch long wheel studs like the part # RG03-060.
view full answer... - Availability of Single 1/2 Inch Diameter Wheel Stud The Redline Replacement Trailer Hub Wheel Stud Drive-In 1/2 Inch x 1-7/8 Inch # RG03-060 referenced in your question is available only in this set of 4. These are not currently available as a single item. We do have the slightly longer Trailer Hub Wheel Stud # 7-122 available as a quantity of one. This stud measures 1/2 inch in diameter and 2 inches in length.
view full answer... - Trailer Wheel Stud that is 1/2 inch Diameter, 1-7/8 inch Long, with 9/16 inch Long SplineThe part # RG03-060 covers all of the dimensions you need from the stud but only comes in a set of 4.
view full answer... - Replacement 1/2" - 20 Wheel Stud OptionsWe have a few different lengths under the 1/2" - 20 wheel stud size so you'll wan to measure the length of what you currently have before ordering a replacement. 1-11/16" Long # K12WB169 1-7/8" # RG03-060 2" Long # K12WB2 2.24" 7-150 2-1/2" # 165995 2-11/16" Long # 7-262 2-3/4" # RG03-080 If you don't see your size you can also go a bit larger and use an open-ended lug nut.
view full answer... - Replacement 1/2 Inch Wheel Stud for a Boat Trailer HubBased on the measurements you have provided it sounds like you have pretty standard wheel studs. Kodiak stud # K12WB2 is nearly spot-on as far as the measurements. I have included a picture showing its measurements for you.
view full answer...
- What is the Thread Pitch for Trailer Hub Wheel Stud Part # RG03-060The threaded pitch of trailer hub wheel stud # RG03-060 is 20 threads per inch and the diameter is 1/2-inch. See diagram to the right.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rick
5/6/2019
All still good. Thanks again.