Wheel Stud Size on Trailer Hub # AKIHUB-545-2-1K
Question:
Could you provide the Knurl diameter and thread count for AKIHUB-545-2-1K and AKIHUB-440-2-G-1K. Thank you.
asked by: Dan
0
Expert Reply:
The trailer hub part # AKIHUB-545-2-1K that you referenced uses 1/2 inch wheel studs like the part # K12WB2 has a thread size of 1/2"-20 UNF-2A. This means 20 threads per inch and 1/2 inch diameter.
expert reply by:
Jameson C
0
Products Referenced in This Question
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Kodiak
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Actuator Not Working with Brake Pedal
- Q&A: Troubleshooting Dexter Brake Actuator
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Trailer Brake Actuator Cycles On and Off
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Solution to Replace 8k Kodiak XL NevR Lube Hub Drums
- Article: Most Popular Wheel Bearings
- Q&A: Replacement for Atwood Surge Brake Actuator 82541
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: My Trailer Hitch Doesn't Fit
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub