Hand Winch Compatible with a Powered Drill For Lifting and Lowering a Gate
Question:
Looking at this winch it brakes ratcheting? for both lifting and lowering without modification correct? I intend to use it for lifting and lowering a gate daily. Would you suggest it for this use? Also I often use a battery powered driver with a 3/4 inch torque head to quickly raise instead of the handle. I noticed this handle connects differently l, would adding a 3/4 nut to continue using impact driver to raise and lower be possible with this winch? Thank you
asked by: Nick
Expert Reply:
The Dutton-Lainson Heavy Duty Brake Winch part # DL10808 has a braking mechanism that locks in place when the handle is released. In order to obtain a ratcheting mechanism with this winch you will want to replace the handle with the Brake Winch Ratcheting Replacement part # DL70346. When used in place of the regular handle, it allows the operator to both raise and lower the load without turning the handle a full revolution.
As long as your gate does not exceed 1,200 lbs, this winch will work well for you. Unfortunately, I cannot recommend you use anything but the handles designed to work with this winch. If you are looking for a winch that is compatible with a powered drill, I recommend using the Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle part # DL11004 in addition to the Hand Winch Strap with Safety Hook part # DL24242 as this option will allow you to use a powered drill.
I have attached a link to a list of all our ratcheting handle brake winches for you.
Products Referenced in This Question
Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs
- Trailer Winch
- Brake Hand Winch
- Utility Winch
- Heavy Duty
- Standard Hand Crank
- Worm Gear Winch
- Polyester Strap
- Dutton-Lainson
more information >
Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
- Accessories and Parts
- Trailer Winch
- Cables and Straps
- 2 Inch Wide
- 2600 lbs
- Straps
- 20 Feet Long
- Dutton-Lainson
more information >
B Series Brake Winch Ratcheting Replacement Handle by Dutton-Lainson
- Accessories and Parts
- Trailer Winch
- Handles
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 1,200 lbs
- Trailer Winch
- Brake Hand Winch
- Utility Winch
- Light Duty
- Standard Hand Crank
- Single Speed Winch
- Wire Rope
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks
- Search Results: retractable step
- Q&A: Parts Needed to Operate Dutton-Lainson Hand Winch # DL14993 With a Drill/Driver
- Q&A: Replacement 1200 Pound Dutton Lainson Brake Winch
- Q&A: Recommended Winch To Replace Older Dutton-Lainson B1200A On Boat Lift
- Q&A: Correct Control Unit for Kwikee 32 Series Step Assembly 90320925
- Q&A: Dutton Lainson Winch Recommendation for Boat Winch on Dock
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Q&A: Brake Hand Winch to Replace 1500-lb-Rated Shelby 5352
- Q&A: Replacing Valve Cable on LaSalle Bristol RV Waste Valve # 34466N11AB96GMA
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Hand Winches