Availability Of Dutton-Lainson DLB800A Brake Winch And 7" Removeable Handle Kit

Question

Question:

Good afternoon, I was hoping you could help me identify parts that are direct crosses to the below Dutton-Lainson parts. Please let me know if you help cross these: 1. DLB800A Brake Winch Plated Part# 14914 2. DLB800A Brake Winch Plated Left Hand Version 3. 6149 Winch Strap - 20 foot winch strap with hook, with breaking strength of 2600 lbs, for winches up to 1700 lbs strap rating must be 150 of winch rating. 2 inch width, includes mounting hardware. 4. 6453 Removable DLB-Series Winch Handle 7 in. Part# 14467

asked by: Drew S

0

Expert Reply:

I would be happy to help!

You are looking for the following Dutton-Lainson parts:

Dutton-Lainson Hand Winch w/ Automatic Brake - Zinc TUFFPLATE Finish - 800 lbs # DL64FR

Dutton-Lainson Hand Winch w/ Automatic Brake - Zinc TUFFPLATE Finish - Left Side Handle - 800 lbs # DL74FR

Replacement Removable Handle Kit for Dutton-Lainson DLB-Series Brake Winches - 7" Long # DL84FR

While we don't currently have the 2600lb winch strap, we do have the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. # DL24242 which would work perfectly on both of the winches mentioned above.

expert reply by: Samuel C

0

Answer 1

The handle on the Dutton-Lainson #DL64FR is secured in place with a 1/2-13 lock nut. The Removable handle kit #DL84FR would attach a little differently, but would give you the ability to get a Drill Adapter #DL6456 that would make winding the winch…

view full answer...

Answer 2

If you are wanting to use a drill to ease operation of the winch, the Dutton-Lainson #DL11011 would be a much better choice. This winch is specifically designed so that the handle is easily removable for use with a drill. Using the shaft directly…

view full answer...

Answer 3

According to Dutton-Lainson, you can indeed use the #DL6454 to replace the existing handle on your DLB800A winch so you can utilize the #DL6456 drill Drive Socket Adapter. I've linked to a description video for the #DL6456 adapter.

view full answer...

Answer 4

I have attached a full dimensional drawing for the #DL64FR below which includes the base hole pattern. This winch has an 800 lb capacity and comes with a 5-year warranty.

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 12

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Availability Of Dutton-Lainson DLB800A Brake Winch And 7" Removeable Handle Kit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching