CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10000G-4 Review Video

The bunk brackets will attach to the trailer cross members using U-bolts. Since you don't need a swiveling bracket, the #CE10600G bracket you mentioned would work fine. I've provided a photo showing how the bunk board attaches to the bracket,…

Boat trailer bunk boards like CE Smith #CE27840 can be secured to swivel brackets like #CE10000G-4 using either galvanized or stainless steel hardware intended for wood. This is not included so you will source the preferred hardware locally. Drilling…

The 9" CE Smith Bolster and Swivel Bracket Assembly item #CE10000G you were looking at, are our go to for replacement bunk brackets. We have had quite a few customers over the years use these on Escort boat trailers. These are sold individually…

The CE Smith Bolster and Swivel Bracket Assemblies part #CE10000G-4 do not have a specified weight capacity as it can vary by the strength of the u-bolts used in conjunctions with these brackets as well as how many brackets are used per board. I know…

I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…

The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.

You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller bunks…

For bunk brackets we have CE Smith Bolster and Swivel Bracket Assemblies #CE10000G-4 as well as others at different lengths. To attach the brackets to the trailer frame you can use U-bolts such as #CE15283GA-2 which are 3-13/16 inches long, 3-1/16…

You'd really need to base it off the hull design of the boat you plan to tow. I'd use swivel bunk brackets like the part #CE10000G-4 to mount the boards as these allow you to angle the boards to match the shape of your boat's hull. I…

So the U-Bolt will secure the CE Smith Light Duty, Vertical Bunk Bracket #CE10603G with the ends pointing towards the back of the trailer. If you look at the picture you took it looks like those fasteners holding your current brackets could be…

The only roller bunks we carry, see link, come in 4 and 5 foot lengths. They can be cut to the lengths needed though. So for example if you needed a 9 foot section you could get 2 of the 5 foot models and cut off 12 inches of one to get 9 feet. For a…

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…