Available Lengths of Boat Trailer Roller Bunks
Question:
do bunk rollers come 6ft long
asked by: Robert
0
Expert Reply:
The only roller bunks we carry, see link, come in 4 and 5 foot lengths. They can be cut to the lengths needed though. So for example if you needed a 9 foot section you could get 2 of the 5 foot models and cut off 12 inches of one to get 9 feet.
For a 6 foot section you could buy three 4-foot sections # DL21754 and cut one in half so you would end up with 6 feet on each side.
expert reply by:
Michael H
0
Products Referenced in This Question
Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE27840 Review
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Q&A: High Speed Rating Trailer Tire Recommendation ST175/80R13
- Shop: Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Q&A: What Type of Bolt Should be Used to Attach Bunk Boards to Swivel Brackets
- Shop: Karrier ST175/80R13 Radial Trailer Tire - Load Range D
- Shop: Karrier ST175/80R13 Radial Trailer Tire - Load Range C
- Shop: Taskmaster ST175/80D13 Bias Trailer Tire - Load Range C
- Video: CE Smith Galvanized U-Bolts Review
- Q&A: Recommended Replacement Bunk Brackets for a Escort Boat Trailer
- Q&A: Type And Size Bolts To Attach Swivel Bracket To Carpeted Bunk Board.
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE15283GA-4 Review
- Video: Review of Redline Boat Trailer Parts - Trailer Square U Bolts With Hardware - 7162184UB
- Q&A: How to Determine U-Bolts and Fasteners Needed to Install SE Smith Bunk Boards and Brackets
- Q&A: How Boat Trailer Bunk Boards Attach to Bunk Brackets
- Q&A: How Much Weight Can the CE Smith Bolster and Swivel Bracket Assemblies Hold
- Search Results: bunk board carpet
- Search Results: marine stereo
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Article: Boat Trailer Showdown: Bunks vs. Rollers
David V.
7/11/2020
My tracker trailer has welded T brackets welded to the rear and mid cross frames with the board bunks bolted to the brackets from underneath the boards. The brackets are 72” apart and the board bunks are about 80” long. What size roller bunks would I need if I removed the wood board bunks ? Or what size roller bunks would I need if I opted to bolt them directly to the existing boards? Thanks.