Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review Video

Yes, the CE Smith Multi Sport Boat and Kayak Trailer #CE48810 will work nicely for transporting a 48" wide 14' long Flycraft inflatable boat over short distances. The bunk boards on this trailer are 5' wide so they will…

The CE Smith Boat Trailer #CE48810 that you referenced is equipped with 4.80/4.00-8 bias ply tires that feature a maximum speed rating of 65 mph.

You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller…

I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…

The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.

The overall measurement from the top of the roller to the bottom of the U channel is 2-1/2 inches. I have provided a photo for you that shows the dimension you inquired about. I have linked you to a parts review video for the Roller Bunk #DL21741 you…

The licensing and registration paperwork is included and delivered with the CE Smith Boat Trailer, part #CE48810. The fees for licensing and registration would be paid at the time it is registered and licensed. The paperwork is not filled out at the…

The CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks #CE48810 is capable of carrying a boat that is up to 12' long and weighing up to 800lbs. The winch tower can be moved front to rear to get your Stryker LX 360 to sit properly with the…

Yes, you could convert your Rolco trailer from the wooden bunks to roller bunks. The Boat Trailer Deluxe Roller Bunk, part #DL21741, has a universal mount system that attaches directly to either vertical or horizontal positioned bunk boards that…

I went out to the warehouse and pulled a roller bunk bracket #DL21742 to measure the slotted hole spacing for you. The slotted holes are 1-1/4 inches apart on center. I also made a short video showing this measurement for you.

The Dutton-Lainson Roller Bunk #DL21741 that you referenced can be installed directly on top of your existing wooden bunks. According to the installation instructions when mounting over wooden bunks a 3/8 inch diameter lag screw is required. The…

The only way the roller bunks like #DL21741 could cause damage is if they were improperly positioned, installed, or the boat exceeded the 3,000 pound capacity. They may leave some marks on the boat from the black rollers but other than that you…