CE Smith Boat Trailer Carpeted Bunk Boards Review and Installation Video

Oddly enough I can't find a decent u-bolt that we carry that would work well for your application.

I have a solution for you but the part #CE10190GA-4 is not available in a half kit so what you would want is the part #CE10190GA with the swivel bracket part #CE10206G. We don't have the bolt and nut though so you would need to supply that…

There are several different tools that could be used. A reciprocating saw is a fairly common tool that most will have access to. An angle grinder with a thin cut-off wheel would also work. If money were no object, a hand-held band saw would be ideal.…

The CE Smith Bolster and Swivel Bracket Assemblies part #CE10000G-4 do not have a specified weight capacity as it can vary by the strength of the u-bolts used in conjunctions with these brackets as well as how many brackets are used per board. I know…

The length of the fold away can be shortened in most circumstances. If you have a 3 x 5 inch trailer tongue then the Fulton Fold-Away Coupler Hinge Kit, item #FHDPB350101, can be used and the extension out front can be cut to any length shorter than…

I've had to do this before, so I understand your concern about the carpet getting shredded. What I did was take a sharp utility knife and cut a small X right where I wanted to drill my holes. This worked very well and didn't rip up the…

The diameter of the U-bolts that need to be used with the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10190GA-4 is 1/2 an inch. If you do not have enough U-bolts, you can purchase 8 of them with the washers and nuts included with…

The CE Smith bunk boards, part #CE27845, are made from untreated southern yellow pine 2 x 4's. The carpeting is a marine-grade, weather resistant carpet.

We do have coupler hinge kits available but what your 2003 EZ Loader trailer would need depends on the dimensions of your trailer's tongue. The part #FHDPB330301 is for 3 inch by 3 inch tongues, the part #FHDPB350101 is for 3 inch by 5 inch…

You will want to make sure when installing the Fulton Fold-Away Coupler Hinge Kit, part #FHDPB330301, that the distance you put the hinge at on the trailer tongue will still allow you to maintain the correct weight capacity and tongue weight for your…

I more or less agree with you. The Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, is a cleaner look and if you got a bad weld job you would not have a safe setup. I have done some welding, I am in no way a…

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…