CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1
(34 reviews)
Price: $7.88
In Stock
CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1
Item # CE10206AA
Our Price: $7.88
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (34)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Boat Trailer Parts - CE10206AA
- Bunks
- Swivel Bracket
- 2 Inch Tall
- 3-1/2 Inch Long
- Aluminum
- 1-1/2 Inch Wide
- CE Smith
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.
Features:
- Swivel bracket lets you tilt the bunk board on your boat trailer
- Helps you to fit the boat hull snugly onto trailer during the loading process
- Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board
- Bolt-on installation
- Attaches to bolster bracket on trailer
- Does not include mounting hardware
- 3 Bolt holes allow for a strong connection to the bunk board
- Aluminum construction is sturdy and offers superior corrosion resistance
- Made in the USA
Specs:
- Quantity: 1 swivel bracket
- Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall
- Diameter of swivel mounting hole: 1/2"
- Diameter of flange mounting holes (each): 3/8"
- Spacing of mounting holes:
- Outer holes (center to center): 2-1/2"
- Inner holes (center to center): 1-1/4"
10206AA CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1
Video of CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for CE Smith Boat Trailer Parts CE10206AA Review
Speaker 1: Today we're taking a look at the CE Smith swivel bracket for boat trailers. Now this swivel bracket lets you tilt the bunk board on your boat trailer. That helps to fit the boat hole onto the trailer a little bit better during the loading process. Now two swivel brackets and two bolster brackets are required for one bunk board. This part number comes with one swivel bracket. Those other items are available at etrailer.com, but just so you know, they're not all included with this part number.
This part number's good for one of these, which is one swivel bracket.It is a bolt on installation. It simply attaches to the bolster bracket on the trailer. And that allows a nice pivot point. It does not come with mounting hardware. And then it has three bolt holes, which would allow for a strong connection to the actual bunk board.
It is constructed of a lightweight aluminum construction. It's very sturdy. It offers superior corrosion resistance. The product's made in the USA.A few measurements to go over with you real quick, starting with the overall length, measuring edge to edge, it measures three and a half inches long. Overall width, you'll see there it's about an inch and a half wide.
The overall height measures about two inches tall. The diameter of the swivel mount hole, that's this large one here in the center, that's a 1/2 inch diameter. The diameter of these holes right here, which would attach to the bunk board, these all have a diameter of 3/8 of an inch. And then these mount holes right here are separated apart from one another on center. Each one is an inch and a quarter.
So from outer one to outer one is two and a half. And that's an inch and a quarter between each one. That's going to do it for today's look at the CE Smith swivel bracket for boat trailers.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1 - CE10206AA
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.by: George 02/12/2024
Original bunk brackets were badly rusted. Luckily I found these CE Smith heavy aluminum swivel brackets that were the same height as the old ones so I didn’t have to adjust my bunks again. I installed them and they are working great. Thanks Etrailer
by: Keith 04/17/2024
Well, extremely thorough on updates about product, availability, shipping and still arrived ahead of estimate.
by: Thomas08/31/2019
Excellent product and easy Install on my boat trailer...Went on just as expected...Thanks again etrailer
by: Harold 01/03/2022
My boat trailer is in and out of salt water. I rinse it afterwards always. My brackets are holding up very well. I would buy these again.
by: Chris05/26/2017
I replaced the galvanized pieces that came stock with my trailer bunks with these aluminum ones and now don't ever have to worry about them again. Perfect solution just what I wanted.
by: Mike M06/28/2016
Very durable and light. Installed my new bunk guide-ins on the boat trailer in a matter of minutes.
by: Jeff F09/26/2019
Product was to the specifications that I needed, and came in a timely manner as all products I order from etrailer.
by: Don 11/16/2020
Great product. Delivered on time and as advertised. Much Better than galvanized.
by: Roy 07/01/2021
its very good but what I really needed was a 4 inch long one in steel but it works very good. The only problem is I have a galv. trailer. I will use it as long as it holds up. The product is very well made.
by: Donald 02/07/2023
Just what you need to mount a 2x4 bunk
by: David04/24/2018
Brackets are holding up well against both wear and corrosion.
by: Alan05/22/2018
A+++++ product.
Tired of all the rust from the galvanized ones.
Etrailer is awesome...
by: Ralph 08/02/2021
Great item! Easy to assemble and all a luminum!
by: Scott05/31/2022
Scott
6/1/2023
Great
by: Tom09/11/2018
sale representative was very courteous, and package arrive on time and professionally packed. Thanks
by: Don B12/28/2015
Product looks to do exactly what I wanted and is really well built. Arrived super fast. Im very satisfied.
by: Ronald 03/03/2021
Look and work amazing...
by: Shane 11/04/2021
Excellent service and exceeded delivery expectations. Will order with you from now on.
by: Steve08/15/2019
Good product delivered on time. 4 stars instead of 5 due to price. Everything else was awesome.
by: William 09/27/2021
overall great experience. parts came quick and customer service was excellent
by: Steve 11/13/2021
Quality, Fit and Finish, Great product.
by: Jeff 07/30/2020
Very fast shipping, great product , will never rust
by: Chuck T10/15/2016
Great quality. Shipped fast
by: Robert 05/16/2020
Exactly as expected
25
34
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Hole Diameter On CE Smith Swivel Bracket for Boat Trailers # CE10206AAThe CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1 # CE10206AA has a 1/2 inch diameter swivel mounting hole. The flange mounting holes are 3/8 inch diameter. The holes on either side of the swivel mounting hole is 1/4 inch diameter.
view full answer... - Recommended Roller Bunks Replacement for Wooden Bunks for G3 1860 BoatWe do have a variety of roller bunks that can be used as a direct replacement for carpeted bunks. I recommend either going with the 2,500 lb capacity which comes in Black # DL21754 or Silver # DL21740, OR the 3,000 lb capacity which also comes in Black # DL21755 or Silver # DL21741. I have also attached a link to all of the options that you can check out, as well as a link to all of our brackets if they also need replacing.
view full answer...
- CE Smith Swivel Bracket for Boat Trailers # CE10206AA Metal ThicknessI spoke with CE Smith and they told me that the # CE10206AA that you referenced has a thickness of 0.19 of an inch.
view full answer... - Bolster Brackets and Swivel Assemblies for SeaDoo TrailerI can help you find the correct bolster and swivel brackets for your Seadoo trailer. The CE Smith part # CE10002G is a galvanized 13 inch bolster with a swivel bracket assembly. The swivel bracket will fit your 2 x 4 bunk great, but the brackets included have a 2-1/2 inch center spacing. We do offer a swivel bracket with a 2 inch center spacing # CE10206AA, but with either I would recommend drilling a hole in the bracket where you need it. It's important to keep in mind that its a...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thomas
9/1/2020
Awesome absolutely no problems, solid equipment