Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
(585 reviews)
Price: $74.94
In Stock
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
Item # TLL160RK
Retail:$85.86
Our Price: $74.94
You Save: 13%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (585)
- Q & A (0)
- Photos
Optronics Trailer Lights - TLL160RK
- Tail Lights
- Rectangle
- LED Light
- Red
- 8L x 3W Inch
- Surface Mount
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Submersible Lights
- Optronics
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.
Features:
- Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted
- Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex
- Built-in license plate light on driver's-side light illuminates license plate
- Sealed, waterproof construction is submersible
- Designed for marine trailer applications
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Red acrylic lens screws on and can be easily replaced
- Molded plastic housing
- Mounts on surface of trailer - hardware included
- 3-Wire pigtail
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
- P2 rated
Specs:
- Configuration: driver side (STL17RB)
- Passenger side (STL16RB)
- Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep
- Diodes: 40
- Driver's-side light: 22 diodes
- Passenger's-side light: 18 diodes
- Power draw at 12.8 volts:
- Stop/turn signal light: 0.259 amps
- Tail light: 0.062 amps
- Lifetime warranty on LEDs
Sealed, Waterproof Trailer Light
The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer. Each circuit board is sealed, which means that water will not damage the diodes or circuit board.
Combination Lights for Trailers Over 80" Wide
If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.
To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.
P2-Rated or P3-Rated Lights
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
TLL160RK Optronics Combination LED Trailer Taillights for Boat and Marine Trailers More Than 80" Wide - Left Side and Right Side - Red Lens
STL16RB and STL17RB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side - TLL160RK
Average Customer Rating: 4.8 out of 5 stars (585 Customer Reviews)
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.by: Brent03/01/2023
The lights work on the boat trailer just fine
I ordered the Wrong size lights but got to work anyway
I kept blowing the light bulbs on the old lights and
The new led lights have not had any problems .
by: William 04/12/2024
Bright lights. Used on EZ loader jetski trailer. Had to drill new mounting holes to fit existing bracket. Comes with steel plated fasteners which I substituted with stainless steel. Have not submersed the lights yet. Say they are submersible. Always a challenge with boat trailers keeping lights working properly. Hoping these LEDs last a long time.
by: Bryan03/25/2023
So far so good. I've had miserable experiences with trailer lighting in general so if these make it more than two years without failing I'll call that a win. The Optronics products overall seem to be good quality and at a good price. I've replaced all the side markers with the Optronics and those have been working well too. That said, I keep spares on hand. I also apply dielectric grease to all wire connections and try to reapply that grease once or twice a year.
by: David06/06/2023
I was an Idiot last week and broke my drivers side light , so I bought a new pair ,very simple to install and they look good right next to my roller guides
by: Dennis Puskarcik03/30/2024
As I have always said etrailer is the only go to for all my trailer parts…….everything I have ordered came on time and was exactly what I ordered
by: Gary04/09/2024
Very nice product, but one of the lenses have small scratches on it, I will try some Plexus to see if I can make look new again. But overall a nice product.
by: Kyle 04/23/2024
Works great, easy install. Only drawback is the ground wires are slightly short.
by: EW08/09/2021
Simple to install and 100% better than what came with the trailer. If I knew then what I know now...I would have replaced the lights years ago before I had to deal with a replacement at an inopportune time.
Ew
8/10/2022
Continues to work like new. Dependable lights that I can count on.
by: BG11/28/2023
Decided to change all the lights on my boat trailer to LED. These were easy to install, and work well.
by: Frank 02/18/2024
Good lights. All ready installed on my utility trailer
by: Michael 08/31/2023
The Optronics LED Combination Trailer Taillights are still working like new after 1 year. They are very bright for extra safety when stopping and pulling a Trailer on the expressway. I highly recommend them.
by: Dennis08/30/2023
Exact replacement at no charge for our drivers side trailer tail light! Have yet to put it on so we shall see.
by: Debra04/17/2024
I originally ordered the wrong item. I immediately ordered the correct item, and incorrect order was taken care of in minutes. It was my error. Sure appreciated the customer service required to cancel the wrong order, instead of having to return it. Totally pleased!!
by: Peter04/11/2022
Excellent product. Well constructed and bright lights. Wiring and attaching to trailer myself saved a lot of money over dealer estimate with same results. I have had zero problems with performance during the first year.
Pete T.
4/13/2023
No problems encountered during 1st year of use. Excellent product
by: Lannie05/01/2024
Right part, shipped really fast. I would highly recommend.
by: Bernard 07/25/2023
Trailer light are fantastic. Installation was easy and lights have been trouble free. Very glad I bought!
by: Randy 02/29/2024
Not installed, but feel heavy duty. Im glad I got them at the price I did, I haven't found any lower and had been looking for weeks.
by: Scott03/14/2024
I do not understand why it took 8 days for part to arrive.
by: Paul09/23/2017
Package delivered promptly. Appeared packaged well. Lights installed easily and operate without issue whatsoever. I decided to purchase this particular brand from this particular retailer because of the lifetime warranty on the LEDs and etrailer's positive reputation.
I am, however, a little disappointed that the lens of one of the lights looked a little scuffed up... as if it had been rubbing against the inside of the plastic packaging. I know things like this don't remain pristine forever, but when you purchase something new you want it to look that way!
by: John 08/14/2023
Haven't installed yet,they should be fine. I don't think I have ever got a bad product from trailer!
by: Kodiak Kid06/03/2023
I replaced my BRAND NEW trailer lights that leaked with these bad boys, Best purchase EVER! Still working and as bright as when I bought them a little over a year ago. Much brighter then OEM. Customer service is top notch!
by: Scott 09/07/2023
Good tail lights. Everything they were supposed to be.
by: Dennis 02/06/2024
Easy install, superior product!
by: Dominic 10/10/2023
Excellent help was provided and the parts came quickly. 2nd time using etrailer, one of the best buying experiences I’ve had. Thank you for providing great customer service!!
by: Bob 07/28/2023
Been working great on my boat trailer in and out of the water
25
585
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- LED Trailer Taillight that Has Mounting Studs that are 4 inches ApartHey Bruce, so the mounting studs of the Optronics LED Combination Trailer Tail Lights # TLL160RK that you referenced can be set exactly 4 inches apart so this light kit would work great as a replacement and would install easily. These are also LED like you said you were wanting too so they fit what you are looking for in that regard as well.
view full answer...
- Tail Lights Failing and Water Intrusion - Which Is Best Replacement?Your tail light failures are almost certainly related to water intrusion. The water is probably coming in through cracked lenses or failed caulk / sealing where the tail light housing meets the camper body. Since your bulb sockets are rusted you are certain to have more issues and now is the time to replace them entirely. Since you are replacing them you should consider LED lighting that is brighter. If you email me back with a picture of your current lights and measurements I can recommend...
view full answer... - LED Replacement Lamps for Wesbar 40326 on 2003 Ranger Trail Boat Trailer Optronics makes an LED lamp that's a direct replacement for the Wesbar 102640. You'll want to go with Optronics # TLL160RK. The lamps are submersible and use just a fraction of the power of a comparable incandescent trailer lamp. This part includes both the driver's and passenger side lamps. If you click the provided link, you can see a product description video featuring the lamps I recommended.
view full answer... - Recommended Replacement Tail Lights for a 2018 Bass Tracker Boat TrailerI have some great compatible replacement tail light options for a 2018 Bass Tracker Boat Trailer. For this, you can use the Optronics LED Combination Trailer Tail Lights part # TLL160RK if you have the rectangular style or the Miro-Flex LED Combination Trailer Tail Lights part # STL28RB & # STL29RB is you have the square style. If either of these don't match up with what you have please just send a photo and I'd be glad to see if we have a better option.
view full answer... - Are Special Tail Lights Needed for Boat Trailer With Wishbone Trailer Wiring HarnessThe tail lights will be the same for a wishbone trailer wiring harness and a standard wiring harness, the only difference is that instead of splicing the two running light wires in together before running the main lead up to the trailer connector, you simply run one for each side up to the trailer connector. The Optronics LED Combination Trailer Tail Lights part # TLL160RK are a great set of submersible tail lights but I have attached a full list of options below.
view full answer... - Trailer Tail Lights Stop Working When Headlights on Jeep are Turned OnIt could be that the lights # TLL160RK are malfunctioning but since the problem only occurs when the headlights are switched on for your 2003 Jeep TJ I think there is either a faulty connection or ground. Have you tried testing the 4-Way flat on your Jeep with your headlights on? If you haven't done that yet see if that makes a difference. You can also try testing your trailer with a different vehicle to see if it gets the same results. Start off by checking the connector on your Jeep...
view full answer... - Replacement Taillights for Boat TrailerThe best option we can give you are replacement taillights, which are a good idea as well because you can upgrade to LED lights. These draw much less power and are guaranteed to last for life. If your trailer is over 80 inches wide I recommend the Optronics LED Combination Trailer Tail Lights # TLL160RK. If it is less than 80 inches wide the correct kit is the LED Combination Tail Light Kit for Trailers under 80" Wide # TLL56RK. I have added links to video reviews as well.
view full answer...
- Locating Replacement Trailer Lights for 1998 Shorelandr Boat Trailer We do have a large selection of trailer lights available that might work well as replacements on your boat trailer. I am not sure as to the exact model assembly that is installed on your Shorelandr Boat Trailer, but researching some pictures online, it looks like it uses rectangular lights similar to the Optronics # TLL160RK. These LED tail lights feature a sealed, waterproof construction perfect for boat trailers and the mounting hardware is included. They measure 2-7/8 inches tall,...
view full answer...
- 4-Way Flat Wiring Harness and Submersible Tail Lights For a Boat Trailer Over 80" WideThe 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB you found is going to have the 3 wires which run down each side of the trailer. One wire on each side is going to be a ground wire(white), the 2nd wire(brown) is going to be for the running lights and side marker/clearance lights and the 3rd wire(green or yellow) is going to be for the turn signal/brake lights for each side of the trailer. The Optronics LED Combination Trailer Tail Lights # TLL160RK are submersible and the correct size needed...
view full answer... - Does it Matter Which Post of Optronics Trailer Taillight # TLL160RK Ground Terminal is Ran toIt does not matter which mounting post of the Optronics Trailer Taillight part # TLL160RK that you run the ground ring terminal to. As long as it ends up making contact with the trailer frame that is all that matters.
view full answer... - Is There a Replacement Tail Light Lens For The Optronics Tail Lights STL56RB & STL57RBThe lenses on your LED Trailer Tail Lights # STL56RB, and # STL57RB are not replaceable. Instead you will need to replace the entire tail light assembly. Another option is switching to the Optronics LED Combination Trailer Tail Lights # TLL160RK which are submersible and can use the replacement Lenses # A16RB if you should ever have one break in the future.
view full answer... - Trailer Tail Lights and Wiring Needed For Installing On a 32' TrailerCurrently all of out trailer light wiring kits will come with only a 25' harness like the Optronics Kit # TL16RK you found. We do have a 35' Harness # A35W42B for the light wiring you can uses with the Optronics LED Combination Trailer Tail Lights # TLL160RK. You will also need Marker Lights # MCL-91AK but be sure to check your local regulations on the qty of lights required on your 32' trailer. And finally a License Plate Bracket # LP5SB to attach with the drivers side tail light.
view full answer... - Does Install of LED Trailer Taillights Require Load ResistorsWhen converting trailer taillights from incandescent to LED you do not need load resistors like you do when making same conversion on a vehicle. So the trailer light # TLL160RK does not come with them nor are they needed.
view full answer... - Complete LED Lighting and Wiring Kit for a Trailer Over 80 Inches Wide Yes, we do have the complete kit with all the wires and lighting you will need to rewire and set your trailer up with new lights. We have two options depending on the amount of side marker lights you want. The first is the LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness item # TLL16RK and the Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness item # TL16RK. I have linked an installation video that will...
view full answer... - Replacing Lights on 2000 Ranger Comanche Trailer with LED LightsI looked at some pictures of your 2000 Ranger Comanche trailer and it appears that the tail lights are the rectangular ones and you could replace them with LED lights # TLL160RK. These lights hang on studs spaced 2 inches apart on center. Each light is 8-1/16" long x 2-7/8" wide x 2-13/16" deep. As far as the other lights on the trailer it is hard to tell. Basically for all of the lights it is going to depend on the dimensions of the lights that you have and how they mount. There isn't...
view full answer... - Recommended Wiring and Lights for Utility TrailerI'm assuming you want to replace everything here so I will start off with a 4-way. I recommend using the Hopkins Endurance 4-Way Flat Trailer Wiring Harness - 30' Long # HM48265. This will give you a lot of wire to work with so you can hook up all of your lights. This uses your typical 18 gauge wire for the lights and 16 gauge for the ground. If you need additional wire you can use the # SWC97FR or # DW02923-1. You could use the Self-Stripping Connector with Waterproof Sealant - 14-18...
view full answer... - Are Optronics LED Combination Trailer Lights DOT Compliant? Yes, the Optronics LED Combination Trailer Tail Lights item # TLL160RK are DOT compliant. They meet the Federal Motor Vehicle Safety Standard 108 (FMVSS 108) which regulates all automotive lighting, signaling and reflective devices in the United States. You will need to check with your Virginia state DOT guidelines to see what other lighting equipment you will need. I have attached a faq link that will help to explain the other requirements that a trailer of your size has.
view full answer... - How Far Apart are the Mounting Points on the Optronics TLL160RK?The mounting holes on the Optronics LED Combination Trailer Tail Lights # TLL160RK are 2 inches apart. I included a picture showing all the measurement for you to check out as well.
view full answer...
- Replacement Recommendation for Wesbar Trailer Tail LightsA lot of the Wesbar tail lights were discontinued so I recommend going with a brand that is still currently producing lights to make future repairs and replacements easier. For your application I recommend checking out the Optronics LED Combination Trailer Tail Lights # TLL160RK which splice in for the running and brake/turn functions and then have a ground that attaches to the frame of the trailer. If your tail lights have a different design just let me know what you have and I'll be...
view full answer... - What is a Good Replacement for the Wesbar 105826?With the 105826 being discontinued from Wesbar, the closest thing available is the Optonics set up # TLL160RK. This is very similar to what you currently have, and is LED like you're wanting, but it would need to be hardwired as it does not have the plug on the end of the wires.
view full answer... - Recommended Replacement 8" x 3" LED Tail Light for Boat TrailerI recommend using the Optronics LED Combination Trailer Tail Lights part # TLL160RK to replace both tail lights on your trailer. These are standard rectangular 8" long x 3" wide tail lights common for boat trailers. They are also LED. The wire colors might not match up but so long as you attach them by function there won't be any issues. I have attached our selection for you below as well but the above should work. If you want the tail lights to match, odds are you will need two news ones.
view full answer... - Mounting Size Info for Optronics Submersible Low Profile Trailer Tail Light # TLL160RKThe Optronics Submersible Low Profile Trailer Tail Light # TLL160RK for both sides of your trailer are a very common style of taillight found on trailers. These are found on several boat trailers that are out there and would most likely easily fit your trailer. I attached a picture that has all of the mounting dimensions for this light for you to check out as well.
view full answer...
- Can 14 Gauge 4-way Wire Be Connected to 20 Gauge Wire From LED Tail Light?You can absolutely connect the 14 gauge and 20 or 18 gauge wires, you'll just want to be extra sure the butt connectors you use to connect from the junction box wire to the lights is secure since you're connecting two different gauge wires. LED lights and clearance lights pull so little power you will not find one that has 14 gauge wire, because that gauge is rated to up to 15 amps and the light will pull nothing close to that. If you haven't picked up the butt connectors yet make sure...
view full answer... - Availability of Replacement Lens for Optronics Trailer Taillights # TLL160RKYou can use the replacement lens part # A16RB on the light assembly that comes with part # TLL160RK.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Installed by:
Adam E
Updated by:
Amy B
Updated by:
Brian T
Video Edited:
Chris R
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brent M.
3/2/2024
I have used the trailer lights for a year now and I don’t worry about the lights anymore. They work great.