LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
(589 reviews)
Price: $48.96
In Stock
LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
Item # STL36RB
Retail:$57.33
Our Price: $48.96
You Save: 15%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (589)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL36RB
- Tail Lights
- Rectangle
- LED Light
- Red
- 8L x 3W Inch
- Surface Mount
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Submersible Lights
- Optronics
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.
Features:
- Rectangular trailer tail light provides stop, turn, and tail light functions
- Built-in side marker and rear clearance light with reflex reflectors
- Sealed, waterproof construction is submersible
- Light is designed specifically for boat trailers
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable plastic housing
- Red lens over white LEDs
- Mounts on surface of trailer - hardware included
- 3-Wire pigtail
- White wire is for ground
- Brown wire is for the tail lights
- Green wire is for the stop and turn lights
- PC rated light produces a 180-degree beam pattern
- DOT compliant
Specs:
- Configuration: passenger's side (right-hand side)
- Driver side: STL37RB (sold separately)
- Dimensions: 7-7/8" long x 3-1/4" tall x 2-7/8" deep
- Diodes: 17
- Power draw at 12.8 volts:
- Stop/turn signal light: 0.181 amps
- Side marker light: 0.047 amps
- Lifetime warranty on LEDs
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
STL36RB Optronics Aero Pro Combination LED Taillight for Marine Trailers More Than 80" Wide - Red Lens - Right Side
Alternate part number: STL-36RB
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- etrailer mistake
Customer Reviews
LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger - STL36RB
Average Customer Rating: 4.9 out of 5 stars (589 Customer Reviews)
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.by: Nick 05/05/2023
Excellent for the money.
Bright like LED’s should be.
Well built and waterproof.
by: Lee 03/06/2024
Lights appear to be good quality as received, hope that once they are installed that they work as good as they look.
A note for others that may be looking, I own a 2001 Ranger 620VS boat and trailer, and the new lights purchased (ref STL36RB and STL37RB) fit perfectly as replacements for my OE lights.
by: Carl 03/10/2023
Great experience. Highly recommend etra iler.
Carl
3/12/2024
Great. It’s a tail light.
Jerred H.
3/13/2024
@Carl
Yes, it is! Happy to hear you like it!
by: Bill 03/17/2024
perfect match to replace the trailer light on my Nitro trailer.
by: Wayne Mc08/26/2016
Very nice lights, Had to modify some for my installation and with no plate holder it took longer, almost one hour each with all I had to move around,I Like the marker on side it gives it a better look and more noticeable at night. Just what I wanted, Now they can see me!
Wayne M.
8/26/2017
Just like new! Have had no issues at all Thanks!!
by: David K.09/01/2014
I am totally satisfied with the new Optronics LED replacements for my 2001 RangerTrail. The new lights are approximately a couple of weeks old and they are replacing sealed Wesbar lights. The LEDs have been in and out of the water about 7-8 times with no issues. I can tell you the new LED lights are a lot brighter and crisper than the original lights and throw more light down the road when driving at nighttime. Installation was mostly a breeze. The only issue was I had to re-drill one hole on the RH side because the factory holes were off by about 1/4 inch vertically. Drilling a new hole through the fiberglass allowed the new LED fixture to fit nicely into the cutout of the trailer. No issues with the LH side. I definitely plan to purchase more LED lighting in the near future from etrailer.com as I look to replace the other running lights on the trailer. I highly recommend Optronics LED lights for anyone who plans to upgrade their old, bulb-style lighting. The pictures I have attached are with the running lights on. No brake lights depressed.
by: Eric05/03/2021
These are great lights, very bright and visible. Had to get this one as a replacement because someone clipped my trailer and broke the lense. The light still worked, just wanted a sealed one and I was painting the trailer so it was a good time.
by: Frank Ridgway05/27/2016
Great people to deal with excellent service & fast delivery. The lights were put on a 2006 Featherlite car trailer direct bolt on & plug in fit perfect. Here's a few pictures of the lights installed
by: Ken 04/26/2024
Perfect transaction every time
by: Ricky 11/02/2023
Love these lights Simple mounting and wiring SUPER BRITE
by: David06/13/2020
Received the taillights yesterday, removed the broken one, and replaced both, so the actually matched. Using heat-shrink solder splices to connect lights to the existing cable connectors. Very pleased with how they look, they are very bright.
by: Andrew 06/22/2023
Perfect replacements for my old 2000 stratos dual axle bass boat trailer.
by: Larry crouch08/05/2016
I had a broken tail light on my trailer so I called a few places and was shocked at how much they were asking for ! taillight, a friend of mine who works for a boat company said look go look at etrailer and I bet you save more than half on the light. Yes I saved a bundle and etrailer had my light at my front door in a couple days. I put the light on my trailer with all the bell's and whistles and really surprised that all the parts came with the light and every thing is good again thanks to etrailer. I know they will have my business for now on for any trailer parts. These people are very professional and responsive and you should really give them a try because you will not be disappointed. Professional company's are hard to find so try them. Thank you etrailer for your help. Larry
Larry C.
8/5/2017
The lights are still going strong and you cannot complain about that. Money well spent and thanks etrailer for your help.
by: Glenn03/18/2019
These lights are fantastic, they are brighter than the standard boat trailer lights, able see license light reflection in sun light, and finally they have supplied S.S. nuts and bolts. No rust!!
I would have rated these 5 star if the nuts and bolts would have been standard size instead of metric. Just took extra time to find mm socket to fit!!
Glenn
3/19/2020
Still fantastic lights!!
by: John D10/17/2014
Great units, used these to replace older leaking tail lights on my boat trailer. These are sealed, do not leak and are very bright. Highly recommend them.
John D.
10/18/2015
Had to replace right side. Not leaking, just stopped working for whatever reason. Still happy with them,
by: Kent P07/22/2012
Super product! Easy to install at a fair price. Super brite LEDs can be seen easily during the daytime.
by: Tom 07/04/2023
Works as it should
by: Cory09/29/2022
Great service! If you have a boat trailer light issue I highly recommend giving these guys a call. I was very satisfied!
by: Tim W06/22/2017
Great replacement light for older Ranger Boat Trailers. Before the round led lights for the fiberglass fenders there was a Wesbar #105826. Can't find them anymore so etrailer recommended these lights as a replacement. They fit in the fender pretty well. I did have to drill new holes for the mounting bolts lower than the original, no biggie. The visibility is vastly superior to the old incandescent bulbs. You'll probably wonder why you hadn't changed them out sooner as I did. Ordered a pair, first shipment had one broken in it, etrailer sent me a new one quickly and emailed a return label. Communication was quick and pleasant. Highly recommend these folks, have dealt with them previously and will again in the future.
by: Kenneth03/21/2019
Everything about the transaction went smoothly. Customer service helped a lot. I was trying to match this light with an existing light. Match looks perfect. Have not installed yet. Waiting for a break in the weather. I don't anticipate any issues.
Kenneth M.
3/22/2020
Works fine. Matching other lamp perfectly.
by: Tim B.06/07/2019
Before purchasing these lights for my boat trailer, I had gone through two sets of lights with incandescent bulbs trying to find lights that wouldn't fill with water and cause damage to the bulbs and sockets. After a year of use, these lights still never leak when the trailer is put in the water. And the brightness of the LEDs is a huge improvement over the incandescents they replaced.
by: Brian12/17/2017
Bought a brand new trailer and from the get go some of the regular lights were intermittent. Finally had enough and ordered LED's to replace them all; have not had a single light issue over a year later. All were direct drop in replacements, fit and look great. Thanks etrailer.com!
by: Robert10/04/2018
Delivered timely as expected, perfect fit and exact replacement for my Nitro Z8 boat trailer. Wires are exact same color match, all you have to do is remove the broken tail light assembly by removing 2 bolts. Cut to length, strip and attach to existing colored wires, Works perfectly. I recommend using Marine grade heat shrink too. If I break another one I will definitely purchase replacement here. Thanks again.
by: Gary M.01/03/2013
I recently purchased this item to replace the incandescent version of this light that no longer worked. Installation was quick and easy. The lights are extremely bright and I can easily tell from the driver seat of my truck that they are working. In addition to this light, I also purchased the STL37RB for the driver side so that I'd have LEDs on both sides of my trailer. I recommend making the jump to LED if you need to replace your old lights.
25
550
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- What 3-Prong Harness is the Rectangular ONE LED Trailer Tail Light Designed to Work WithI do have an option for you but the ONE LED Trailer Tail Light part # STL0067RPG is designed to work with a factory installed three-prong connector which we don't offer separately. These are installed at the boat trailer factory to make changing out the taillights easy. Therefore, if you don't already have this you'll need to go with a hardwire version instead for which I recommend the LED Tail Light part # STL37RB for driver or part # STL36RB for passenger.
view full answer... - Is the LED Trailer Light Kit Offered With Longer Wiring HarnessThe trailer tail light kits like part # TL16RK all come with a standard 25' long harness so if you need a longer one you'll need to piece together your own kit. LED Tail Light part # STL36RB and part # STL37RB ThinLine Mini LED Side Marker or Clearance Light part # MCL-91AK 35 Ft 4-Way Trailer Wiring Harness part # A35W42B
view full answer... - Will Optronics Trailer Light STL36RB Fit a 2-3/4 Inch Wide Mounting Surface on a TrailerThe Optronics trailer light # STL36RB, mounts by attaching 2 or 3 bolts to the trailer frame and then sliding the light over the bolts. The back of the light has mounting slots to fit over the bolt heads. I have included a picture that shows this and the spacing.
view full answer...
- Replacement Tail Light Options for 2002 Pro Craft Boat TrailerMy technical contact at Wesbar informed me that the submersible light that you have was discontinued a while back so replacement lenses are unavailable. Replacing your tail lights is going to be your best option. The Wesbar Submersible Right Hand Tail Light # 403076 that you referenced is the closest they currently have to the one that you have on your 2002 Pro Craft boat trailer. If you need the left hand light as well, it is # 403026. Another option is the Optronics Aero Pro Submersible...
view full answer...
- Replacement Light for ST-36-RH Tail LightTo replace your trailer's ST-36 RH light, you will want the Optronics Aero Pro Trailer Tail Light item # STL36RB. This will be a direct replacement for your passenger side light. The driver's side replacement is item # STL37RPG.
view full answer... - Why are Some Lights Listed as Over 80 Inches and Others Under 80 InchesThe reason there are trailer light kits listed for under 80 inches and over 80 inches is that there are different lighting regulations for vehicles that have widths that are larger than 80 inches in width than ones that are less than 80 inches wide. You will need to check with your local laws and regulations on trailer lighting also. Check out the LED Submersible Right Hand Light # STL8RB and the LED Submersible Left Hand Light # STL9RB. These are stud mounted, submersible, rectangle lights...
view full answer... - Looking for LED Version of Optronics ST36RB Trailer TaillightWe do indeed offer an LED equivalent as part # STL36RB. The # STL36RB is a 17-diode taillight that offers stop/turn/running lamp functions and is for use on the passenger side of the trailer. I've linked to an install/demonstration video that you might find helpful.
view full answer... - Comparing Optronics Aero Pro and Glolight Trailer Tail LightsThere would be a noticeable difference if you had both the Aero Pro light # STL37RB and the Glolight, # STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the top and bottom bars that light up solid. Both lights are going to be plenty bright. Light # STL37RB has 23 diodes which will be very bright as you can see in the picture submitted by reviewer Becky P. She is using tail lights # STL37RB and...
view full answer...
- Is there an LED Replacement Available for the Low Profile Submersible Boat Trailer LightsThere is an LED version to replace the whole light on your trailer, you could use the Over 80 inch, Rectangular Submersible LED Trailer Tail Light, # STL36RB and STL37RB. The part you were looking at is not available in an LED version. I have added a link to all of our LED trailer lights. You can use the icons at the top of the page or the filters on the left hand side to search for LED lights that may suit your need.
view full answer... - Number of Diodes in Optronics Trailer Taillights STL16RB/STL17RB and STL36RB/STL37RBThe trailer taillights part # STL16RB and # STL17RB have 18 diodes and the tailligths part numbers # STL36RB and # STL37RB have 17 diodes so they are very similar.
view full answer... - Trailer Tail Light Recommendation that Needs Mounting Studs that are 2-1/2 inches LongNone of the stud mounted trailer taillights are going to have studs that are 2-1/2 inches in length. What you could do is get a Aero Pro Submersible LED Trailer Tail and License Light # STL37RB and then swap out the carriage bolts that come with it for longer ones that would fit your trailer. The matching other right hand light would be # STL36RB.
view full answer... - Replacement Trailer Light Recommendation for a 2004 Pro Team 175 Boat TrailerI tried to find pictures of your trailer so that I could determine what trailer lights it would have and could not find a solid picture that I could use to know for certain what you have. One picture looked very similar to the # STL36RPG and the # STL37RPG that you referenced so there is a great chance these lights would work. If your lights measure 7-7/8" L x 3-1/4" W x 2-7/8" D then these would work.
view full answer... - LED Tail Lights with a Plug-In Connector for a 2008 Bass Tracker- Trailstar Boat TrailerWe do have the lights you are looking for. For the right hand side use Aero Pro Submersible LED Trailer Tail Light # STL36RPG. It is the same light only with a 2-wire molded plug. The matching left hand side is # STL37RPG.
view full answer... - Optronics LED Trailer Tail Lights for 1999 Bass Tracker Boat TrailerSince you want to use the Aero Pro Submersible LED trailer tail lights on your Bass Tracker trailer you will want to order part # STL36RB for the right-hand or passenger side and part # STL37RB for the left or driver side. The driver side light matches this design but it has additional LEDs for the extra functions it provides, such as license plate illumination.
view full answer... - Will Optronics LED Trailer Taillights STL37RB and STL36RB Fit Shorelandr TrailerWe've seen Shorlandr trailers use the LD tail light part # STL37RB and # STL36RB for the other side so we know it will fit and work great.
view full answer... - How to Determine Replacement Lens for TrailerWe may have a replacement lens for your trailer but there is no way for us to know the light or the lens you currently have. So you will need to know the part number of your light in order to get the correct replacement lens. For example, the Replacement Tail Light Lens for Optronics ST36RB and ST37RB # A39RB fits LED Tail Lights # STL36RB. If you can't find the part number you will need to replace the entire light assembly. You can do this by simply measuring your current light and finding...
view full answer... - LED Replacement Lights for a Boat Trailer with Wesbar 105826 Tail LightsFor an LED replacement that is nearly identical to the Wesbar 105826 light you can use # STL36RB for the right side and # STL37RB for the left side. There are also versions that have a plug instead of just bare wires. For the right side use # STL36RPG and for the left use # STL37RPG. I have linked a couple of review videos for you as well.
view full answer... - Replacement Lens for Optronics ST-36-RH Tail LightFrom what I was able to find out with my research is that the ST-36-RH that you've got is the same light as our Optronics LED Tail Light # STL36RB; the replacement lens for the STL36RB can be found using part # A39RB. With that said, Optronics does make changes to their lights from time to time so I've provided a diagram that shows the dimensions of the current STL36RB that you'll want to make sure your current light conforms to. They should be fairly similar, but the important dimensions...
view full answer...
- Wire Functions of Optronics LED Tail Light STL37RB and STL36RBThe replacement light I believe you are talking about is the LED Tail Light for Trailers Over 80" Wide - Driver Side # STL37RB. The brown wire for this light is the tail lights, while the yellow wire is for stop and turn lights. It also has a white wire, which is of course for ground. You will need to match those up to the functions of your trailer's red and black wires; the easiest way to do this is plug in the trailer to the vehicle, have someone activate the functions and you can find...
view full answer... - Right Hand Taillight Recommendation to Match the part # STL37RBThe Left Hand Optronics Light part # STL37RB is sold individually. For the matching right hand side light you would want the part # STL36RB.
view full answer... - Do You Have a Replacment Lens for Optronics Light part STL37RBI spoke with my contact at Optronics and they do not have a replacement lens for the LED STL37RB or part # STL36RB. They do have them for the incandescent version, part # ST37RB or part # ST36RB. If you have the incandescent lights, the replacement lens is part # A39RB.
view full answer... - Will You Need to Re-Wire a Boat Trailer In Order to Switch to LED LightsNo, you should not need to rewire your whole trailer just to switch to LED lights. Unless you get into doing the swap and discover your wiring is damaged, it should be as easy as mounting the new lights and wiring them in. The LED Tail Light # STL37RB (driver side) and LED Tail Light # STL36RB (passenger side) are great choices to replace your Wesbar 105826 lights. These lights are submersible and splice into your wiring in place of your old lights.
view full answer... - Recommended 3 Wire LED Replacement Option for # ST66RPGFor the LED version of the # ST66RPG taillight, you will want the Over 80", Aero Pro Submersible LED Trailer Tail Light, 2 Wire, 7-Function, 17 Diode, RH # STL36RB and LH # STL37RPG.
view full answer... - Replacement Lens for 7-3/4 x 3-1/4 Inch Optronics Trailer Tail LightBased on the dimensions you provided, you're most likely looking for the Optronics replacement lens # A39RB, which fits the Optronics Aero Pro Trailer Tail Light Drivers Side item # ST37RB or the Passenger Side item # STL36RB and measure 7-7/8" long x 3-1/4" tall. This is the closest match to the dimensions you provided.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Brian T
Installed by:
Cole B
Installed by:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick
5/6/2024
Excellent