LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 22 Diodes - Driver Side
(167 reviews)
Price: $29.54
LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 22 Diodes - Driver Side
Item # STL17RB
Retail:$60.31
Our Price: $29.54
You Save: 51%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (167)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL17RB
- Tail Lights
- Rectangle
- LED Light
- Red
- 8-1/16L x 2-7/8W Inch
- Surface Mount
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Submersible Lights
- Optronics
8-1/16" x 2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. 3-Wire pigtail. P2PC Rated.
Features:
- Rectangular trailer tail light serves 8 functions
- Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear clearance light, rear reflex reflector, and license plate illuminator
- Sealed, waterproof construction is submersible
- Light is designed specifically for boat trailers
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide better light with less power output
- No bulbs to replace - no brittle filaments
- Acrylic lens screws on and can be easily replaced
- Durable plastic housing
- Red lens over white LEDs
- Mounts on surface of trailer - hardware included
- 3-Wire pigtail
- White wire for ground
- Brown wire for tail
- Green wire for stop/turn signal
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
- Designed for use on trailers over 80" wide when properly mounted
- P2PC rated
Specs:
- Configuration: driver's side (left-hand side)
- Passenger's-side light (STL16RB) sold separately
- Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep
- Diodes: 22
- Power draw at 12.8 volts:
- Stop/turn signal light: 0.259 amps
- Tail light: 0.062 amps
- Quantity: 1
- Lifetime warranty on LEDs
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
Combination Lights for Trailers Over 80" Wide
If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.
To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
STL17RB Optronics Combination LED Taillight for Trailers More Than 80" Wide - Left Side - Red Lens
Alternate part number: STL-17RB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Wrong item shipped
Customer Reviews
LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 22 Diodes - Driver Side - STL17RB
Average Customer Rating: 4.9 out of 5 stars (167 Customer Reviews)
8-1/16" x 2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. 3-Wire pigtail. P2PC Rated.by: Terry04/30/2022
replacement LED for one that the turn signal guit working that was installed about 2 months ago.
by: Robert 07/12/2023
Factory wire leads need to be a little longer and ground wire needs to have a ring terminal with an integral heat shrink wrap. The open crimped ring terminal with exposed wire provided on this light will quickly corrode and fall apart on a boat trailer when exposed to salt water immersion. Otherwise, a good quality LED light.
by: Dennis08/30/2023
Exact replacement at no charge for our drivers side trailer tail light! Have yet to put it on so we shall see.
by: Jeff 01/06/2024
After 1 year still waterproof. Works like a charm
by: Lora J05/19/2018
Delivered quickly, easy installation, MUCH brighter than the incandescent lights that were on the trailer. Mounted the same, so installed in less than 30 minutes. Looking forward to not replacing bulbs every time we launch the boat.
by: Tom09/19/2021
The light was an exact match to the broken one. I soldered the wires and covered them with heat shrink tubes to complete the installation.
by: ILLIMITED, Inc.02/04/2024
Part was exactly what I needed. Great price and quick delivery.
by: Thomas 02/01/2024
Product fits perfectly
by: Ronald05/26/2023
The part seems to be fairly common and available from a number of sources. What sets etrailer apart is the uncommon service they provide. Absolutely first class. This is the way it should be done. Kudos to Paula S !!
by: JP Madren08/13/2015
I called up Etrailer.com and was assisted by a very friendly and knowledgable young lady that helped me get exactly what I needed. The transaction was as painless as possible and took all of about 5 minutes. I had already found the left LED light part number and she told me the part number for the right side light, both matched up exactly to the shape/size and mounting configuration of my existing light that had bulbs.
My package arrived in great shape in only 2 days and installation was a breeze - around 5 minutes a light. The LEDs look great and gave my 4 year old boat trailer a new look. I highly recommend etrailer for any lighting needs you may have and also the LED lights. No more bulbs to blow out and no more worries of corrosion of the fixtures.
Jp M.
8/18/2016
Anytime I need anything that you folks carry...Ill be ordering from you. You are Top quality folks...have great products at fair prices and I couldnt have been happier with the whole experience. The fact that youre checking back just proves my point.
by: David 10/17/2023
Odelia is awesome, she deserves a promo tion
by: Dick B06/21/2019
I have been dunking these lights in salt water every weekend for more than a year on my boat trailer. Gone are the days of chasing corroded bulbs and sockets. Remember to use heat shrink on the electrical connections to keep them waterproof.
On top of that, these lights are nice and bright.
Dick B.
6/22/2020
These lights continue to take dunking in salt water. It feels great to know that each trip doesnt start with an effortto find that burned out bulb or corroded connection. Be sure to use shrink tubing on the wire connections, though.
by: Phil Z11/21/2016
I needed to replace some of the lights on my boat trailer. The old light were incandescent and some of the bulbs had burned out, securing screws were rusted. Product was exactly what I was looking for. Links on each product web page provided very good description and product information.
Thank you for great selection and process.
Phil Z.
11/21/2017
I am very happy, the lights are working great, with no issues. Thank you
by: Marshall H06/08/2016
This light was a much needed upgrade on my boat trailer to make it look more modern and not so old. It is very bright, fit right into the existing holes I used for the old lights and wiring it up could be easier! Have yet to dunk it in the water but I'm sure it will be just fine! Great Product!
Marshall H.
6/8/2017
Its been a year and these lights are still working as advertised. Been able to launch the boat with my trailer lights still hooked up no problems!
by: Al T.05/26/2020
I got these led lights to replace my original trailer lights. Easy to install and a lot brighter, definitely recommend them for anyone wanting to replace there old trailer lights.
Al T.
6/16/2021
Still going strong. Definitely worth the buy.
by: Sean11/07/2022
This light was easy to install and is much brighter than the other tail light with a plain bulb which I replaced 2 years ago. When that older light fails, I will be replacing it with the LED model.
by: Andrea B07/17/2013
The is the EXACT same light for half the price for my MagicTilt Trailer! VERY HAPPY. Thank you.. now if i could just quit backing into the planters on the side of the house would fix the problem!
Andrea B.
7/17/2014
The lights are still going strong after a year! No problems with water or night driving. Light up every time!
by: Mike B04/01/2017
Purchased a set of these lights as replacement/upgrades on my existing standard boat trailer lights. These LEDs lights perform exactly as described. They are completely water tight. After one full year of use, they perform as well as the day I installed them.
by: PLD09/14/2017
I installed these on my boat trailer, replacing a cheaper LED light set purchased elsewhere, which failed after about 1 year of use, and failed with an internal short. I installed these a year ago, along with a new trailer harness. Work great.
by: Brendan10/29/2018
Replaced broken tail light on a 2003 520 very Ranger boat trailer. I changed over both lights as I am not interested in spending $170 on not exact replacements. These lights work great. Wiring diagram would help. Not a big deal. If you get wires crossed up, it is obvious that reversing connection is needed. I ordered stl 16 and 17.
by: Shawn07/04/2016
There were a perfect fit replacement for my 1992 Tracker Trailstar boat trailer. It had Wesbar 3348 tailights on it. These look exactly the same but they have sealed LED capsules inside. It was gonna be the same price to replace the old style bulb capsules in the Wesbar's as it was to but these whole brand new sealed LED tails. The are very clear and bright. Huge improvement!
by: Dean 01/17/2023
Easy installation. Works perfectly.
by: Russ P07/02/2016
etrailer.com has turned out to be a great resource for all my trailer parts. I found them by accident after I got my first trailer. I recently bought a pair of LED Tail lights and they were shipped within hours of getting my order. They were a direct bolt-on. Couldn't have been easier to replace.
etrailer.com is my new favorite for all my trailer parts going forward.
by: Ron T (Va)09/13/2016
Flawless throughout the year bouncing along the highway and loading and unloading my boat in frigid water. Twice as bright as my previous "sealed capsule" tail lights, which I would have had to replace 2-3 times in that period.
Wish I had found them years ago!
by: Rick M.02/27/2012
The review and ordering process went quite smoothly, especially since it was my first time to the website. I was amazed at the vast amount of inventory at etrailer and decided I will be back. Tracking of my order was easier since the tracking info was preset into the url as opposed to being directed to a general site. Delivery was in the allotted timeframe. My thanks go out to Herb for securing the 3-5 day express shipping. Thanks etrailer.
25
167
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Replacement Tail Lights Included In TLL16RK Kit for Trailer Over 80 Inches The tail lights that are included in the # TLL16RK kit you referenced are # STL16RB for the passenger side and # STL17RB for the driver's.
view full answer... - Trailer Taillight Lens Recommendation to Replace AISTP2 85If your tail lights look like # STL16RB or # STL17RB, then you can use the Replacement Tail Light Lens, # A16RB.
view full answer... - LED Trailer Taillight Recommendation that Has License Plate LightThe Bargman 84 and 85 series taillights like the # 47-84-610 that you referenced don't have a license plate light, so a better option will be the # STL17RB for the left hand side light and then part # STL16RB for the right hand side. Then for a license plate bracket you would want the # LP5SB. The # STL17RB has a license plate light.
view full answer... - Triton Utility Trailer LED Light ReplacementI pulled up pictures of your Monarch trailer lights and the closest LED taillight assemblies we carry are the part # STL17RB for the driver side and part # STL16RB for the passenger side.
view full answer... - Replacement Tail Light Lens on a Snowmobile Trailer with Optronics Tail LightsIf your tail lights look like # STL16RB or # STL17RB, then you can use the Replacement Tail Light Lens, # A16RB. This is the correct replacement for the tail light. If the lens portion is deeper on your lights than those pictured, you may have a 26 series light like # STL26RB as an example. The 1/16 of an inch would be the very first tick mark after the 8 inch line on a ruler (provided the ruler measures in 1/16 increments). Both my Staples ruler and Craftsman tape measure use the 1/16...
view full answer... - Replacement Passenger Side Tail Light for Sun Tracker TrailerIt definitely looks like you need a new tail light assembly for your 2017 Sun Tracker trailer. I recommend the LED Combination Tail Light for Trailers over 80" Wide - Submersible - Red - Passenger Side # STL16RB because of its long-lasting, bright LEDs, easy surface-mount and its waterproof housing. It may be a good idea to replace your driver's side light as well with the accompanying LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - Red Lens - Driver # STL17RB, or...
view full answer...
- Warranty of the Rectangular Submersible LED Trailer Tail and License Light # STL17RBI checked with Optronics and the Rectangular Submersible LED Trailer Tail and License Light # STL17RB that you referenced has a lifetime LED warranty which means that if the LEDs were to fail on the light they would be replaced. When backing your boat trailer into water we still strongly recommend you unplug your trailer wiring before the trailer get submerged.
view full answer... - Replacement LED Submersible Trailer Taillight Recommendation for 2007 Stratos TrailerYes, the LED Tail Light for Trailers Over 80" Wide # STL17RB and # STL16RB would work well for your 2007 Stratos 176xt carrying trailer. These lights are submersible which means that all of the circuits are waterproof and protected from the water but water will run through just the housing of the light. I attached a review video for this light for you to check out as well.
view full answer... - Replacement Driver's Side LED Tail Light for 2019 Trailstar TrailerFor the driver's side tail light based on the photos I could find you will want the LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 22 Diodes - Driver Side # STL17RB. I've attached a couple videos to assist.
view full answer... - Number of Diodes in Optronics Trailer Taillights STL16RB/STL17RB and STL36RB/STL37RBThe trailer taillights part # STL16RB and # STL17RB have 18 diodes and the tailligths part numbers # STL36RB and # STL37RB have 17 diodes so they are very similar.
view full answer... - Replacement Taillight Recommendation for 1997 Tracker TrailstarI pulled up as many pictures of your trailer as I could off Google and it looks like the taillights you would need are part # STL16RB for the passenger side and part # STL17RB for the right hand side.
view full answer... - Recommended Replacement Taillights for Shorlandr Boat TrailerThe best option we will be able to offer for taillights for a Shorlandr boat trailer is a new set of matching taillights and for this I recommend LED Combination Tail Light part # STL17RB for driver side and part # STL16RB for passenger side. These lights are seven/eight function and measure 8-1/16" long x 2-7/8" tall x 2-13/16" deep. I won't have any good replacements to match up to the part you listed unfortunately. I have attached our full section as well if you would like to opt for...
view full answer... - Will the ST17RB Over 80 inch Rectangular Submersible Trailer Tail Light Fit on a LoadRite TrailerI did some research online and found that the LoadRite trailer very well could use a light like the Over 80 inch, Rectangular Submersible Trailer Tail Light, # ST17RB (left) or ST16RB (right). LoadRite uses several different styles of light and have recently gone to LED lights on many of their boat trailers. If your trailer is newer and has LED lights you would most likely need the, # STL17RB and # STL16RB, lights to replace the original lights. I pulled the # ST17RB light and did a short...
view full answer... - What is the Matching Right Hand Tail Light for Trailer Tail Light # STL17RBThe matching right hand light that you will need is # STL16RB. We also have these lights together in a kit, # TLL16RK. The kit comes with a license plate mounting brackets, mounting hardware, and a 25 foot wiring harness with 4-Way connector. I have included a link to a video showing a typical installation for you.
view full answer... - Single Submersible LED Tail Light For Over 80 Inch Wide TrailerThe Waterproof Over 80" LED Trailer Light Kit with 25' Wiring Harness # TLL16RK does have the parts available separately. You can get # STL16RB for the passenger side or # STL17RB for the driver's side which includes the light for the license plate so it is 8 functions instead of 7.
view full answer... - Trailer Light Replacement For # 271575If you're wanting to replace this trailer light 271575 with this light # 106410 it will work as it's the same size and has the same functions as the one you're replacing. The only thing is that it is an incandescent bulb and not LED. I recommend replacing with an LED. This light # STL17RB is just like the one you're wanting to use # 106410, but it's LED.
view full answer... - LED Tail Lights for a Ranger Trail XT188 Boat TrailerI checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light # STL22RB is a great option for an LED upgrade. These lights use pigtail # A47PB and will fit the mounts currently on the trailer. If your trailer has different tail lights, such as those that hang from studs then # STL16RB and # STL17RB are great options for that mounting style. If neither of the recommendations above are the light style or...
view full answer... - LED Replacement Lights for Wesbar 102640For and LED replacement for your Wesbar 102640 I recommend the Optronics LED Combination Tail Light for Trailers over 80" Wide. This light measures 8-1/16" long x 2-7/8" wide x 2-13/16" deep. You will need the # STL16RB for the passenger side and the # STL17RB for the driver side.
view full answer... - Replacement Trailer Taillight Recommendation for 2014 Yacht Club Aluminum Boat TrailerI looked up pictures of your trailer and it uses the style of trailer taillight like the part # STL0017RB that you referenced so this would easily work well for you. Or if you prefer a style that has more diodes (22 instead of 1) we have the part # STL17RB.
view full answer... - Why is Optronics Light part # STL16RB 7 Function and # STL17RB 8 FunctionThe matching driver side light to go with the part # STL16RB that you have is the part # STL17RB that you also mentioned. The reason this light says it has an additional function is that the bottom of it has a clear lens to illuminate a license plate.
view full answer... - Recommendation for License Bracket Compatible With Optronics LED Tail and License Light # STL17RBThe license plate bracket you will need for the Optronics Rectangular Submersible LED Trailer Tail and License Light, part # STL17RB, is the Optronics Trailer License Plate Mount Bracket, part # LP5SB. This is the bracket that is used in the Optronics Waterproof, LED Trailer Light Kit with Wiring Harness, part # TLL16RK.
view full answer... - Determining Which Replacement Driver Side Tail Light Fits Jmoo 1629 angler 1860 Excel Boat TrailerI would be happy to help you find the correct replacement driver side tail light for your Jmoo 1629 Angler 1860 boat trailer, but we do not have a break down of the specific components your trailer uses. Instead you will need to either find the part number stamped on your tail lights, or take a few pictures and measurements and reply back to me with them. For example the Optronics LED Combination Trailer Tail Lights # TLL160RK you were looking at measure 8-1/16" long x 2-7/8" tall x 2-13/16"...
view full answer...
- Need Submersible LED Taillight for Tracker Trailstar Trailer Lamp Part Number S2T216AP2From what I've found online, the proper replacement for your S2T216AP2 is # STL16RB for the passenger side and # STL17RB for the driver side. The # ST37RB lamp you'd looked at is a little smaller and is an incandescent lamp, not an LED.
view full answer... - Replacement Tail Lights for Discontinued Wesbar Tail Lights On an EZ Loader Boat Trailer Unfortunately Bruce, It would appear your lights are being discontinued so we would only have an entire replacement light like the Optronics Passenger # STL16RB and Driver # STL17RB tail lights. These will have the same 3 wire connections and similar mounting style as your current Wesbar lights. And if you should ever need replacement lenses in the future we have the Replacements # A16RB which will fit on either side tail light so you could keep one set on hand.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Video by:
Kathleen M
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Terry
5/1/2023
Had to replace the right light assembly because the center elements that do the turn signal melted.