bing tracking image
  1. RV Vents and Fans
  2. MAXXAIR
  3. Vent
  4. Roof Vent
  5. 12V Fan
  6. 14W x 14L Inch
MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke

MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke

Retail:$166.97
Our Price: $157.25
You Save: $9.72
RV Vents and Fans
Shipping Weight: 12 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out. Great Prices for the best rv vents and fans from MAXXAIR. MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part number MA00A04401K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (752)
  • Q & A (0)
  • Photos

MAXXAIR RV Vents and Fans

  • Vent
  • Roof Vent
  • 12V Fan
  • 14W x 14L Inch
  • Tinted
  • MAXXAIR
  • Manual Lift
  • 4-1/4 Inch
  • Plastic

This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.


Features:

  • Roof vent with fan moves air out of your RV, camper, or enclosed trailer
    • Vent allows air to circulate while your RV remains locked and secure
  • 12V DC, variable-speed fan has 4 speed options to let you increase or reduce airflow
    • Exhausts air out
    • Circulates air like a ceiling fan when the vent is closed
  • Flush-mounted keypad on vent allows you to turn the fan on and off and set the fan speed
  • Translucent, smoke-colored dome (or lid) is made of high-density polypropylene
    • Seamless, low-profile appearance when closed
  • Manual lift design has 2 arms to support the dome and keep it open
    • Manual knob lets you operate dome
  • Bug screen keeps insects out and is easy to remove for cleaning or maintenance
  • Fuse-protected, ball bearing motor is sealed to keep out dust, dirt, and moisture
  • Rubber weather seal helps prevent leaks when vent is closed
  • Molded-in mounting flange is constructed of UV-resistant ABS plastic
    • Smooth edges won't cut you during installation
  • Mounting tabs on flange allow for no-drill, tool-free installation of FanMate vent cover (sold separately)
  • White interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation
    • Roof sealant sold separately
  • 2-Wire design
    • Black wire is power
    • White wire is ground


Specs:

  • Fits: roofs 2" - 6-1/2" thick
    • Opening size: 14" wide x 14" long
  • Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide
    • Garnish dimensions: 16-1/4" long x 16-1/2" wide
  • Vent extends above roof:
    • When closed: 4-1/4"
    • When open: 12-1/4"
  • Overall fan diameter: 12"
  • Fan capacity: 900 CFM
  • Quantity of fan blades: 10
  • Power draw: 5 amps
  • Warranty:
    • 2-Year limited on vent assembly
    • Limited lifetime on dome


Note: Not for use above tubs, showers, or range cooking surfaces.


Variable-Speed Fan


MaxxFan Plus Fan Motor

The 12-volt, variable-speed fan operates in manual mode. You can choose from 4 different speeds to increase or reduce the airflow as needed.


This fan also exhausts stale air out of your RV. To enter ceiling fan mode, close the vent while the fan is still running. The fan then circulates the air inside your RV like a ceiling fan.


The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture.


Flush-Mounted Keypad


Keypad for MaxxFan Plus

The flush-mounted keypad on the vent enables you to operate the fan, including turning the fan on or off. You can also control the fan speed.


Manual-Lift Dome with Twin Arms


MaxxFan Plus Dual Arms - Manual

The dome on this roof vent is constructed of durable high-density polyethylene, and it is translucent so that some natural light can shine through. When it's closed, the dome provides a seamless, low-profile appearance that blends into the roof of your RV.


Unlike a dome that has only 1 arm, this manual-lift dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving.


MaxxFan Plus Manual Knob

And a manual hand knob is built into the underside of the vent to allow you to open and close the dome. Pull the knob outward, turn it to where you want it, and push it in to lock the dome into place.


Removable Bug Screen


MaxxFan Plus Bug Screen

This vent has a bug screen that helps keep insects and debris out of your RV. It is secured to the vent with 4 built-in retainer clips. These clips make it easy to remove the screen for cleaning or maintenance. Just rotate the clips, and the screen will pop out.


Installation

The MaxxFan Plus vent fits standard 14" x 14" openings in the roof of an RV, camper, or enclosed trailer. A white interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation. The vent also has a molded-in mounting flange that is lined with a rubber weather seal, which helps prevent leaks. Roof sealant (sold separately) is required for installation.


To install, connect the two wires on the vent to your RV's electrical system. The black wire is for power, and the white wire is for ground. Then insert the MaxxFan Plus into the opening in the roof and mount the flange to the roof. To finish, trim the garnish as needed to fit the thickness of your roof and install it.


MaxxFan Plus With FanMate Cover

For extra rain protection, install a MaxxAir FanMate vent cover (sold separately) using the molded mounting tabs located on the flange. The tabs are designed to align with the integrated brackets on the FanMate, allowing for a no-drill, tool-free installation. These tabs also have rubber inserts that prevent water from seeping in under the flange.



00A04401K Max Air Max Fan RV and Trailer Roof Vent - Smoke Dome

Item # MA00A04401K

Installation Details MA00A04401K Installation instructions



Customer Satisfaction Score:


Customer Reviews

MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke - MA00A04401K

Average Customer Rating:  4.7 out of 5 stars   (752 Customer Reviews)

This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.

by:

Well packaged. Great installation video. Only complaint is that it was delivered 4 days after anticipated date, that isn't shipper's fault. Installation was a snap after I removed all the old sealant, etc.Very pleased with this product.



by:

This vent fan helps a lot with keeping my 7x14 cargo trailer cool. Did a lot of modifications with my trailer especially insulating the ceiling and now with this fan makes it better and cooler. The lid is always open to let the heat out because i have the MaxxAir II cover so rain cant get in. Fan runs better with more or bigger airflow from the side vents when all doors are closed so i added the Redline II popup vent and it works great. Fan does not slow down.
Im glad i got this and will be purchasing again when i get another trailer.
Thanks ETrailer

Leslie

2/11/2021

Still Awesome



by:

MaxxFan works great, helpful install video made it a piece of cake. thanks eTrailer!

William

8/20/2023

Still works great, very happy with this fan and e trailer!



by:

Delivery was quicker than expected and at a great price. Thank you E-Trailer!

Craig

9/3/2023

I am very happy with this item it has been working flawlessly for me.



by:

Love this fan, use it to ventilate my Lance truck camper. Works really good when I'm cooking, etc. Installation was easy. Just make sure you have 12 volt power wires nearby. One of the better upgrades I've installed on my Lance.



by:

I installed this fan in a home built camper that I filmed while building and posted the entire build on You Tube. The fan has help up perfectly and on low speed it will run a very long time with out recharging the battery. I have built five of these small campers and four of them have been equipped with this fan.



by:

I havent hooked it up to power yet but the install was easy once I got the hole in the van the right size. I did opt for getting different hardware. I purchased machines screws and bolts, which worked much better than the wood screws the fan came with.



by:

Exactly what I need to remove heat and fumes from my trailer while traveling.



by:

This fan works great in our camper. I like the smoke colored lid, because it helps keep the bathroom cooler. The fan is strong and pulls out all heat, moisture and odor from the bathroom. I wish we had replaced our old fan sooner, this is a much better product!

Anita

10/18/2022

A year later, this maxxfan vent is still working perfectly. We have had no troubles. I would definitely recommend.



by:

Overall, I think the fan is a great addition and improvement to my, or any, camper. I installed it in the bathroom to replace the typical small fan vent you get from a manufacturer. I only wish it was able to go in reverse so it could blow in air. This one only pulls out.

Matthew

8/10/2022

I am still satisfied with my purchase. The fan works great and is much quieter the the factory mini fan.



by:

Easy install and a huge upgrade compared to what came with our RV!



by:

I haven't had time to install it yet but it looks like a quality product



by:

I have used etrailer for years and continue to be impressed with their products, support and reasonable pricing. Recently installed a MaxxAir vent fan in my high top van and it is a fantastic fan. Great quality, quiet and powerful! Highly recommend etrailer and this product

Edmund

2/4/2021

I installed this vent in a FordTransit 250 which I am converting into a camper. The fan is awesome and works great



by:

Working on building a custom camper and this is just what I needed for a roof fan. Haven't installed it yet, but I did connect it up to a battery just to see how much air it would move. It's very quiet on speeds 1 and 2. 3 and 4 are a little noisier but it can really move a ton of air once its spun up that fast. I was really impressed with what this little fan can do.

Kevin S.

4/30/2021

Been working great. Weve had our camper out several times and this fan has been an integral part of keeping our space well ventilated.



by:

The MaxxFan roof vent arrived much faster than an anticipated. I havent installed it yet so can not comment on performance. etrailer is very easy to order from and great on explaining deatails about the items.

Larry H.

10/18/2021

I have ordered several products from trailer and have been very pleased with each. The max air fan works great. It took me a bit to work up the nerve to cut a 14” by 14” hole in the roof of van but no worries, the installation went well.

Larry H.

10/18/2021

I have ordered several products from trailer and have been very pleased with each. The max air fan works great. It took me a bit to work up the nerve to cut a 14” by 14” hole in the roof of van but no worries, the installation went well.



by:

I'm excited to install these vents. They arrived on time and in perfect condition. The box was heavy duty protecting the items from damage.



by:

Nice fit, very powerful, very adjustable, and much quieter than the unit that it replaced. Appears to have an option for a winter cover, based on some additional female sliding holes of some sort? that I know nothing about.

Etrailer Expert

Heather A.

11/21/2017

Gregory, Thank you for your review. This Maxxfan includes molded mounting tabs to install a FanMate vent cover. The FanMate part 955003 slips over the molding tabs and clips on to provide superior rain protection.



by:

Exactly what I wanted sand instal was e asy.



by:

Xcellnt Vent - Installed my vent a yr ago (long story), but only made it operational 10-2018, so I Very much like that it's manual, so i could open/close it without power. Best feature, dual lift arms. Able to drive with the vent open without the lid flapping "Very Stable". A great "Basic" fan vent without all fancy stuff like Rain Sensor, Thermostat, Variable Speed, like my last one that ends up not working after parts are no longer available. 4 speeds is enough. It's Quiet. Lifetime Lid Warranty "Awesome", my last one spider cracked from UV. Only option I'd like to see is "reverse". Doesn't feel like it's moving much air with the lid closed but I have not as yet used it as a ceiling fan to circulate heat. If it does it will be the perfect vent. I will be putting it to that test in the coming months so the jury is still out on that one.



by:

Fan works great. It's quiet and improved the air flow in the travel trailer tremendously.
Brfore you couldn't get enough air moving through the trailer to keep it cool without the air conditioner.
The install was easy. It replaced an existing vent and there was 12 volts there already.



by:

Great fan for the price. Installation was easy. You will spend time removing the old dicor on the roof if you are replacing a fan like we did but it was worth it.

Scotts758

8/13/2019

Great still!



by:

Moves air well. While it's quiet compared to my other vent fan, it developed a squeak that I could not fix. My unit's motor died after a couple months. I contacted the manufacturer and they sent me another motor, which was easy to replace.



by:

This item is an edition in the living area to aid in removing heat and add window circulation. Bathroom already had the same unit and I've used these before with great success.

Charles

5/19/2022

Doing very well as expected. This is not my first installation as Ive installed several in trailers over the years with great results each time.



by:

Purchased to install in fifth wheel bedroom, where no fan existed, just a roof vent. Most time consuming was removing the old vent. The caulking removal was a real labor intensive operation. The factory must have used a fire hose to apply the stuff. Once the vent removed and the caulking mostly removed, the install of the maxxair went pretty smooth. Putty tape (purchased from local shop) under the rim, several stainless screws (15), came with fan, then finish roof top install with self leveling caulk around rim and on screw heads. Inside had to tie into 12v wiring at bathroom fan and fish wires to bedroom vent hole, less than 4 feet. Made connections, put on interior trim, and now wait for next RV outing to test efficiency. Works great in driveway. And one more thing, I also installed a Maxxair II vent cover in black. Helps to darken bedroom along with protecting vent.



by:

Easy installation and directions...this fan made a huge difference in the temperature in my camper

Dennis

5/5/2022

If you are mechanically inclined this vent fan is easy to install and it made a big difference in the temperature in my camper. Love it!


25
748
Show More Reviews

See what our Experts say about this MAXXAIR RV Vents and Fans

  • Replacement for MaxxAir # 4050K Roof Vent Fan
    The MaxxFan # MA00A04401K would be a good replacement fan for most any camper. It fits a standard 14X14" opening and features 4-speed exhaust fan, manual lift design, removable bug screen and sealed motor. A new inside ceiling trim piece (garnish) is included. You may want to additionally consider adding the MaxxAir # MA00-955001 FanMate roof cover to help keep the rain out. Additionally, during installation you will need the TremPro # 0160297 roof sealant.
    view full answer...
  • What is the Amp Draw for the Various Settings on the MaxxAir MaxxFan # MA00A04401K
    The MaxxAir MaxxFan # MA00A04401K that you asked about has a maximum draw of 4-1/4 amps when it is set at it's highest setting. Since this is a 4 speed fan it will decrease about 25 percent for each setting that is one step lower. This means that it will draw about 1 amp per setting. My contact at MaxxAir confirmed this.
    view full answer...
  • Rain Cover Recommendation for the MaxxAir MaxxFan part # MA00A04401K
    The rain cover you would want to use with the MaxxAir MaxxFan part # MA00A04401K that you referenced is the # MA00-955003 which has the correct hinge design you would need. I attached a review video for more info for you to check out as well.
    view full answer...
  • Determining Which RV Roof Vent Fits 2009 Keystone Sprinter Travel Trailer
    I have another option for you but the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal # V2110SP-24 is a entire replacement vent and will not work with the fan your current roof vent lid has. For a replacement vent that has a fan I recommend the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White # MA00-04301M or Smoke # MA00A04401K. Both of these vents have a 12v fan with 4 speeds which exhausts hot air out when the vent is open, or acts...
    view full answer...
  • Correct Replacement Remote for a MaxxFan 4401K Roof Vent
    The Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan # FV9068-09 you purchased is actually the replacement remote for the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote # FV807350 and will not work with your MaxxFan Roof Vent w/ 12V Fan # MA00A04401K. Instead, what you're going to want is the Replacement Remote for MaxxAir Roof Vent Exhaust Only Fan # MA00A01151K. This is the direct OEM replacement remote for your MaxxFan. Attached is a product review video...
    view full answer...
  • Replacement Fan Circuit Board for a MaxxFan Roof Vent w/ 12V Fan # MA00A04401K
    I think you have the MaxxFan Roof Vent w/ 12V Fan # MA00A04401K, I didn't find anything using the ma00-04401k number you provided. But that ma00-04401k number is only one digit off of # MA00A04401K. The correct replacement board for the # MA00A04401K fan is the Replacement Printed Circuit Board # MA10-04301k-v16. If you were talking about the flush-mounted key pad with the power button, we do not have that. The # MA00A04401K fan is able to use the Remote for MaxxAir Roof Vent # MA00A01151K...
    view full answer...
  • Remote Replacement Recommendation for MaxxAir Roof Vent MA00A04401K
    We have the replacement remote part # MA00A01151K which is the correct remote for the vent assembly you mentioned part # MA00A04401K.
    view full answer...
  • I have a mass air 4401k what rain cover do I need
    The correct rain shield for your MaxxAir MaxxFan 4401K # MA00A04401K would be the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White # MA76JR. This cover comes with a pin & clip connectors to easily attach to 2015 and newer MaxxAir vents, but also includes mounting hardware so you can mount it to older models. If you have an older model unit and need to screw in mounting brackets then I recommend picking up some butyl tape # AL28FJ to place on the back of the mounting holes...
    view full answer...
  • Replacement Remote Control For MaxxFan Deluxe Roof Vents
    Sounds like the remote is down for the count and needs to be replaced. If you have the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-07500K you will need the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K. If you have the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke # MA00A04401K you will want to get the Replacement Remote for MaxxAir Roof Vent Exhaust Only Fans - Qty 1 #...
    view full answer...
  • Will MaxxFan Roof Vent With 12 Volt Fan Fit Roof With Slight Curve
    A slight curvature to your roof will not be a problem; you'll be able to install the MaxxFan Roof Vent. This is a pretty common thing on RVs and if you take a look at the accompanying photo, you can see the MaxxFan installed on a trailer with a roof that has curvature to it. The 4-speed MaxxFan you asked about is available in either Smoke or White, so you can choose the one with the color that best suits you: - Smoke: MaxxFan Roof Vent with 12V Fan # MA00A04401K - White: MaxxFan Roof...
    view full answer...
    Image 1 for
  • Enclosed Trailer Roof Vent Cover Needed for a MaxxAir 4-Speed MaxxFan
    Since the MaxxAir 4-Speed MaxxFans # MA00A04301K and # MA00A04401K have the tabs on the side you need a MaxxAir II cover that mounts directly to the tabs. We have these in White # MA76JR or Black # MA86JR depending on what you would like for your vent. Please note that these will fit but may not allow your vent to open completely. I have verified that this will not be a problem.
    view full answer...
  • MaxxFan Roof Vent w/ 12V Fan in White Versus Smoke
    The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke # MA00A04401K can have the cover replaced with a white one using # MA10A40002K. This is the closest option to clear. If you want a powered lift you can alternatively use the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 4 Speed - White # MA00-04751KSX which will use the same replacement lid.
    view full answer...
  • Installing A MaxxFan Roof Vent On A Ford Transit 250 Van
    The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item # MA00A04401K requires a 14" x 14" opening and your wall would need to be 2" - 6-1/2" in thickness so you'd most likely need to build some sort of frame to reach that thickness. As long as you can meet the fit requirements and run 12v DC power to it there's no reason why you couldn't. This fan will stick out 4-1/4" when closed and 12-1/4" when open. Note: this fan is not for use above tubs, showers, or range cooking...
    view full answer...
  • Can MaxxFan Roof Vent part # MA00A04401K Install on Aluminum Roof
    Yes you could install the MaxxFan Roof Vent part # MA00A04401K on your aluminum cap. You would need to build a frame in the roof like you mentioned though. The thickness of the frame would need to be between 2 and 6-1/2 inch thick.
    view full answer...
  • Can a Variable Speed Motor be Added to the Ventline Vanair Trailer Roof Vent
    I am sure you could install a variable speed motor on the Ventline Vanair Trailer Roof Vent part # VP-543SP but the manufacturer, Ventline (Dexter) does not recommend this nor would they honor any warranty claim if done so. The only powered vent fan options we offer with variable speed motors are the 14" long x 14" wide models like the MaxxFan Roof Vent w/ 12V Fan part # MA00A04401K.
    view full answer...
  • Should I Use Smoke or White MaxxAir Roof Vent and Vent Cover
    Both the smoke and white colors will be the same in regards to how much heat gets through and will be relatively similar when it comes to light, although the smoke will naturally be a little darker. Since you'll be using the roof vent AND a cover though you won't see as much light either way so my recommendation is to use whichever matches the color scheme of your trailer better. For white you want these parts: Vent - # MA00-04002K Vent Cover - # MA76JR For smoke you want these parts: Vent...
    view full answer...
  • Can a MaxxFan Manual Lift Vent be Converted into a Powered Lift
    Unfortunately, MaxxAir does not have a conversion kit or motor that will turn your manual lift air vent into a powered lift. You may want to replace the vent with the MaxxFan Plus, part # MA00-04500K. It has the same dimensions and features of your current vent but with the added powered lift and controller. I've linked to a video review of this vent for you to consider.
    view full answer...
  • Will Lid of MaxxAir MaxxFan part # MA00A04401K Leak Water if Lid is Closed
    If the lid of the MaxxAir MaxxFan part # MA00A04401K was closed it would not leak any water inside your RV. Honestly if you have one exhaust fan going and then can have the windows of your Sprinter down too you will move a healthy amount of air. That being said an additional vent would not necessarily hurt. You might try one and then possibly add a second if more is desired.
    view full answer...
  • Vent Cover Needed for MaxxAir MaxxFan Vent on a 2018 Forest River R-Pod
    The rain covers that are direct fits your MaxxAir MaxxFan # MA00A04401K are parts # MA00-955003 for Smoke and # MA00-955001 for White. These come with clips that allow you to easily secure or remove the cover from the MaxxFan. If instead you are talking about a replacement lid then you would be wanting part # MA10A40009K.
    view full answer...
  • MaxxFan Roof Vent Flange Depth
    The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke, # MA00A04401K, fits roofs 2" - 6-1/2" thick. Adjustments can be made and trimming if needed.
    view full answer...
  • Replacement Lid for MaxxFan Roof Vent w/ 12V Fan in Smoke
    Yes, the correct replacement lid for the MaxxFan Roof Vent w/ 12V Fan part # MA00A04401K is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K.
    view full answer...
  • Difference Between MaxxAir MaxxFan Mini Roof Vent and MaxxFan Roof Vent
    The difference between the MaxxAir MaxxFan Mini Roof Vent # MA00-04401M and the MaxxFan Roof Vent # MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's closed compared to 4-1/4 inches on the standard model. The MaxxFan Mini will also work with a thinner RV/Camper roof as it is compatible with roof thicknesses of 1 inch to 6-1/2 inches (compared to 2 inches to 6-1/2 inches on the standard unit). As...
    view full answer...
  • Replacement Remote For MaxxFan Deluxe 5100K
    The Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans # MA00A01150K and the Replacement Remote for MaxxAir Roof Vent Exhaust Only Fans # MA00A01151K is not the same part, and will fit different models. If you have the MaxxFan Deluxe # MA00-05100K, then the remote you need is the Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans # MA00A01150K, not # MA00A01151K. The MAxxAir Roof Vent Intake/Exhaust Fans # MA00A01151K will work with the MaxxFan #...
    view full answer...
  • Potential Replacement Lid Options for a Bathroom Vent on a 2019 Forest River Sonoma Mountain Edition
    We carry replacement lids for RV roof/bathroom vents. Unfortunately your RV information does not tell me what vent that you have on your 2019 Forest River Sonoma Mountain Edition travel trailer. Often times the bathroom vent is a round vent, but it could also be a square vent. The correct replacement lid would depend on the model of vent you have. For instance the Replacement Plastic Dome Assembly for Ventline Vanair Trailer Roof Vent # BVA0502-03 fits the Ventline Vanair Trailer Roof...
    view full answer...


< Previous
12



Do you have a question about this RV Vents and Fan?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Updated by:
Kathleen M
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Adam Y
Updated by:
Adam Y
Employee Manda E
Updated by:
Manda E
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Jacob W
Written by:
Jacob W
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.