Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the printed circuit board for your MaxxFan RV roof vent with manual lift.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the replacement printed circuit board. Now, this replaces the printed circuit board for your max fan RV roof vent, with manual lift. It works with part numbers MA00-04000K, MA00-05100K and MA00-6200K.It's a direct replacement from the original manufacturer. It has the quick connect plug on these two wires over here. This is like your antennae, so that does not actually get connected, and then these two wires will need to be hard wired in and they are labeled. This one's your positive wire, white one is your negative or ground.That's going to do it for today's look at the replacement printed circuit board..
Average Customer Rating: 4.5 out of 5 stars (99 Customer Reviews)
Replaces the printed circuit board for your MaxxFan RV roof vent with manual lift.This is the second item that I"ve ordered that has arrived with damage. The prongs for the touch pad connection were all bent almost 4o degrees to the side and one of the electrical components was also bent over the edge of the board. It was shipped in a thin bubble envelope that offered no protection! This item deserved a box and adequate padding to ensure its interity. Worst of all it did not solve the issue with the fan! I will continue to find the cause of the failure and let you know if this board failed because of the damage. I suspect it is a voltage issue that the manufacturer has failed to address properly.
This circuit board did the trick and brought a dead Maxxair fan back to life. I was thrilled with the price, the quick shipping, and communication from etrailer folks through the whole process. I was also please to see the recent manufacture date on the board, which hopefully indicates I won't run into any of the issues that plagued the original board.
Worst fan ever! 3 circuit boards 1 touch pad 1st circuit board was under warranty they knew there was a problem. Very dissatisfied with this product
Very pleased with the product. Still working great after a year. Also was delivered ahead of the delivery date. Recommend your company to friends and family. Thank you etrailer.com
etrailer did its job well. They got the right part shipped right away, and were johnny on the spot as regards to communications about my purchase and the shipping details. Alas, the replacement circuit board did not rectify the issues I'm having with my fan. This is not an etrailer issue, it's a MaxxAir issue.
Customer service was excellent. Quick replies to inquiries,always kept informed of order status and good follow up after delivery.The circuit board fit perfectly,was fairly straightforward to install and my fan now works like new.Very happy with my first experience with this company.
Howard
8/19/2023
Hi.Pleased to report that after 1 year the fan is still working perfectly.I would just like to mention that prior to installing the new circuit board I used an ink pen type applicator to seal it with a conformal coating.I decided to do this after seeing an on-line tutorial that suggested the failure of the original board may have been due to moisture.The fan worked fine for the first 5 years so it may be too early to know if the conformal coating is helping or not.
Mike L.
9/13/2023
Very quick to fulfill order. Great serv ice
I have not installed the part yet but ordering service was goid
I was bummed about having to replace the circuit board on my MaxxAir fan and finally conceded that I'd spring for the part.
I chose etrailer.com because their price was the best. Once on the phone with Joanne, I quickly realized that she could handle my concerns about whether this new board would solve the problems of the old board. She answered my questions, gave me some confidence in the outcome, and was polite, personable, and professional.
Joanne K. Followed up with an estimated delivery date which was accurate. Today I received the board, installed it, and it solved the problem! Joanne K. Is the best!
Great product. Easy to install.
Part worked perfect. I bought this as I was getting intermittent green blinking light followed by a loss of power. This happened after I went to a lithium battery. As others have said, the volts are higher and older models are said to not like volts over 12.8 or so. I hooked it up. Was very easy to do. And, ran it for about 2 hours. Ran it on all speeds and also changed directions. No issues. I'm going on a 4500 mile trip. So, that'll be the real test! If I have issues I'll re post.
Our Maxxfan had a flashing green light and beeping from the unit. Thanks to your on line trouble shooting help, it told us when you have this issue, you need to replace the circuit board. Again, through your online help info, it told us the part number the circuit board we needed for our 4000k Maxxfan. I paid for faster shipping and received the circuit board in 2 days. The extra shipping fee was worth the price. The circuit board was easy to replace and we are up and running again. This fan is in our bedroom and we use it constantly when we RV. A very happy customer!
Product came precoated, exactly as advertised. A bit in the expensive side.
Just installed and everything works gre at
etrailer provided terrific customer service by getting us the needed part quickly and by providing access to a technician who could answer our questions regarding troubleshooting (to determine which part was needed) quick and easily.
Quick service, worked as it should.
Easy install, fixed problem immediately. Definitely suggest testing your fan motor before ordering to narrow down any problems to circuit board.
Quick shipping, excellent service!
The price I paid for this part, at least it should include the plastic keyboard that the circuit board mounts to. I like value and it feels like this company is nickel and diming me on this product.
The circuit board was easy to install using the provided instructions and it still works like new.
Website was easy to navigate. Shipping was fast. The part was the correct one and fit perfectly
I was getting the green light of death on my max air fan. It would run on low speed ok, but when I increased the fan speed it would stop and the light would flash green. So I would have to cut the power to reset the fan, then it would work on low speed but I got the flashing green light. So I saw that many had changed the circus board to fix the problem. I found the circuit board on e trailer, changed it today. It seems to be fixed. I let the fan run for about two hours today on a higher speed and it ran the hole time. E trailer got the part to me fast. I’m very happy that it worked for me.
Took about 15 minutes to install and works perfectly. Ordered March 2022 with anticipated delivery date of October 2022, so was happy to receive it in July 2022.
Greg
7/8/2023
The fan is still working perfectly one year later.
Took awhile to ship. But worth the wait for a direct replacement for my Maxxair vent.
Ralph
11/9/2022
Controller for Maxxair is still performing well.
Installed this 2 years ago and has been smooth sailing so far.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/1/2023
I am sorry to hear that it arrived damaged. I will have our Customer Service team reach out to you.