Ventline Roof Vent w/ 120V Fan - Manual Lift - 14-1/4" x 14-1/4" - White - Polar Trim
(55 reviews)
Price: $118.58
Ventline Roof Vent w/ 120V Fan - Manual Lift - 14-1/4" x 14-1/4" - White - Polar Trim
Item # V2128SP-01
Retail:$166.72
Our Price: $118.58
You Save: $48.14
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (55)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2128SP-01
- Vent
- Roof Vent
- 110V Fan
- 14W x 14L Inch
- White
- Ventline
- Manual Lift
- 4-1/2 Inch
- Plastic and Metal
This roof vent uses a 120V fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.
Features:
- Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
- Simple to upgrade from non-powered model
- Basic, hand-operated crank rotates to open and close dome
- Switch to turn the fan on/off is mounted on the vent
- Translucent cover allows some light through
- Aerodynamic, wedge-shaped dome made of durable polypropylene
- Galvanized steel roof flange won't rust or corrode
- Built-in screen keeps debris and insects out of trailer
- Polar White interior trim piece (or garnish) is included
- Made in the USA
Specs:
- Included garnish fits roofs 2-1/8" to 3-1/4" thick
- Garnish leg length (depth): 2-1/8"
- Garnish color: Polar White
- Other garnish sizes are available (sold separately)
- Fan power: 120-volt AC
- 100CFM
- Motor power draw: 0.77 amps
- Cover color: white
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Vent extends above roof:
- 4-1/2" Closed
- 10" Open
- 2-Year warranty
Notes:
- Screws and sealer are not included. See installation kit (344270KITW), which includes all necessary screws and sealer to install vent.
- Not for use above tubs, showers or range cooking surfaces.
Installation Instructions
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Remove screen frame and wiring compartment cover to make electrical connections.
- Connect to 120-volt DC power source.
- Replace screen frame.
- Attach interior garnish piece with #8 screws.
V2128SP-01 Ventline Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White
Replaces V2128-611-00
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ventline Roof Vent w/ 120V Fan - Manual Lift - 14-1/4" x 14-1/4" - White - Polar Trim - V2128SP-01
Average Customer Rating: 4.6 out of 5 stars (55 Customer Reviews)
This roof vent uses a 120V fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.by: Stephen01/05/2024
Overall seems like will work for me, but the box had been opened before (black fingerprints all over the unit). This is more a Ventline issue than etrailer issue as it came packaged in the original box. Also, they more clearly mark that there are no screws or other mounting equipment unless you buy the add on package.
by: Michael 04/19/2024
Awesome very fast delivery, thank you will definitely shop again.
by: Mary Lou11/28/2016
1. It was easy to order with the Zach's help.
2. It got here quickly
3. Everything came together and all parts were there. (It would have been easier if the knob came unattached )
4. Working great as a ventilation fan.
by: Robert O.08/26/2014
What can I say? After many days of searching, I finally found exactly what I needed at etrailers.com. Not only is it a great product from Ventline, but no one can beat the price or delivery time. I needed a roof vent with 110V which is hard to find. Found it at etrailer.com at a very low price. I also ordered a range hood for my kitchen in the camper and it just fits perfect and looks really good and I can hear myself cooking....LOL. My old range hood was an old Jenson and it had to be replaced. I highly recommend etrailer.com as they carry many great products at very good prices. I will shop again when I need to replace or upgrade something in my camper. Thanks etrailer.com for the great products.
Robert
6/1/2015
Kelly....Those roof vents are made to blow out not in. But I am no vent expert, but for some reason I am thinking that if you can make the fan fit backwards and should work. I know that I have taken a bathroom exhaust fan in a house and reversed it put it in backwards it worked for what I needed for. Also try searching the internet for RV fans, NOT exhaust fans. Good luck!!!
Karissa
6/16/2015
Hi Robert, It is crazy how hard it is to find a 110 volt fan for a trailer! I noticed this fan has a very small fan in the corner compared to a 12v fan which takes up the entire space. Does this little fan do a good job of pulling out the heat?Thanks!Karissa
by: Robert 09/28/2023
Excellent product.
by: Paul10/13/2018
I bought this fan to replace my AC unit which I damaged going through a car wash which had too low of a ceiling. It turned out to be a blessing in disguise though because the AC unit hung down too far inside the trailer, causing me to be cautious to avoid banging my head. The fan unit fit excellent and came with nice trim. The fan made use of the AC wiring so now all is well. The fan was a good choice and makes for a smoother roof top on my trailer. I use it for dry camping and don't need AC anyway.
by: frank l07/22/2016
vent and fan unit is good. i added the vent hood covet for protection and to trailer with vent open and love it! seperate purchase looks like a mini roof air conditioner.
i installed into an enclosed trailer so only sheet metal thickness which meant the inner flange would not be used no matter how it was trimmed.
mounting kits available online had sheet metal screws and urethane caulk.
i do not use those and opted for pan head stainlesss steel screws, flat washers for both sides and lock nuts and a good urethane caulk. 3m marine grade is best but hard to get and long cure time for best stuff. i would not do just any silicone but do the best you can get and look at weather to have the time for cure. for example the best caulk is 3m 5200 is marine grade below water line but takes 7 days to cure. i
by: Connie 07/20/2023
Communication was top notch top notch. Actually felt like they cared about their customer!
by: Tom06/04/2022
We love this bought 2 for our large food trailer
They have made a huge difference getting the ceiling heat out and making it more comfortable for us!
I have question?
Do you sell a replacement dome?
Unfortunatly we lost one today
Please let me know
Thank you
Jenny N.
6/8/2022
You mentioned that you were looking for a replacement dome. We do have several available. If it is for a roof vent that is the same as part # V2128SP-01 then the dome cover is part # BVD0449-A01.
by: Eric A. II02/22/2019
Roof vent/fan arrived with no damage and as promised. Installed it tnis afternoon after cutting the hole in the roof...wife not excited about that! Installation was straight forward (13 1/2" square, folks, not 14") and easy to wire up and works like a dream. Wife now excited about that!! Had some issues with the website when I tried to order but a phone call to etrailer fixed that up right away quick and in a hurry! The folks bent over backwards to help this ol' technology challenged swabby get the correct item to fill my need and ordered. Impressed with etrailer the product and their prices. Thank you. And I will be back
by: Tammy03/03/2023
The fan itself works well though it is a little loud. The only reason I didn’t give it 5 stars is because the frame is flimsy and the screen is very easy to damage. Other than that, I’m pleased with both of my fans.
by: Steve S.07/31/2017
We have ordered four RV / trailer vents from ETRAILER, and three have arrived damaged. One was packed at ETRAILER in this condition, the others probably were damaged in transit by the carrier. Then the wrong replacement part was shipped. Staff have been very polite and helpful but their shipping department could use some improvements.
by: Raul12/15/2014
The roof vent was perfect for my application! It works great!
Raul
12/15/2015
Product is still holding up nicely even through severe weather!
by: Josiah03/16/2023
Functions as it should and was not a difficult install. Inexpensively made and did arrive damaged from shipping.
by: Leroy Doe04/20/2016
Ordered 110 volt roof fan to put in my enclosed trailer and they where only one that sold this type fan everybody else where 12 volt .They told me the fan would be delivered by certain day and was every thing came just as ordered on time. Would buy from them again.
by: Laura 04/17/2023
Just what we needed to fix our broken v ent.
by: Pamela05/06/2019
I purchased a Ventline rv vents and fan 120v, installed and works great.
by: Karl 02/05/2023
Arrived in good time. It was shipped out soon after ordering. The unit was in perfect shape upon un packing. It is just what I needed for my project. Very happy with seller. Thakyou
by: Dan05/27/2016
Fast shipping. Installed it the next day, hit the button and it ran great, also I couldn't beat the price. I have a concession trailer so I bought this to pull out some of the heat.
by: Jean-Pierre02/02/2023
the trim is to thin for the thickness of the top of my mobol home
by: Henry06/14/2018
Excellent product. Installed in a food truck to remove heat from flattop grill. Removes heat as intended and helps keep temperature inside at a tolerable level.
by: Lawrence05/20/2022
I went to 4 RV/mobile home dealers in Lake county Florida and none of them had even one of these in stock. I was glad that you had this available to order.
by: Mike10/05/2017
The product was great, but the customer service was OUTSTANDING. Other sites selling similar products have very poor websites, misleading product descriptions and terrible customer service. etrailer.com has it right!
by: ShanaE06/17/2017
We just received it today. It is in good condition and came very quickly. I will not get a chance to try it out until we build our Teardrop to put it in. But it is what we were looking for.
25
55
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- Would the Ventline Roof Vent part # V2128SP-01 be LoudThe Ventline Roof Vent part # V2128SP-01 that you referenced wouldn't excessively vibrate or be loud at all. For an install kit you would want the part # 344270KITW.
view full answer... - Vent Fan for a Cargo Trailer ConversionWe have the Ventline Roof Vent w/ 110V Fan # V2128SP-01 which fits a 14-1/4" wide x 14-1/4" long opening and roofs that are 2-1/8" to 3-1/4" thick. It is a 110v fan, there is not a 120v fan option. If the 110v option does not work for you, we also have it in a 12v option. - Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-30 (Fits 1-7/8" to 3" thick roofs)
view full answer... - Options for replacing a 30 year old Ventline bathroom fan in RVI have a solution for you, but unfortunately I was not able to cross reference part number I87999 on the old Ventline motor, and my Ventline contact did not have any luck either. Due to this, and due to the fact that your fan is almost 30 years old, I would recommend just replacing the entire vent assembly at this point. For this, I would go with Ventline Roof Vent w/ 110V Fan - Manual Lift - 14-1/4" x 14-1/4" White # V2128SP-01 if your RV is still using AC power for the fan motor. If...
view full answer... - Trailer Roof Vent With 110V Fan and Smoke Dome Assembly The only 14W x 14L roof vent we offer with a 110V fan is the Ventline Roof Vent part # V2128SP-01 with a white dome assembly however, you may switch out the dome assembly on the vent with part # BVD0449-A03 with the darker smoke color lid. If it turns out you need a 12V fan with a smoke colored dome assembly, I recommend Ventline Ventadome Trailer Roof Vent w/ 12V Fan part # V2094SP-34.
view full answer... - Trailer Roof Vent Recommendation for Above ShowerWhen it comes to a vent that can be installed above your shower, I have two options for you. One being the Ultra-Fab Solar-Powered Plumbing Vent, # UF53-945001, and the other, a standard roof vent like the Ventline Ventadome Trailer Roof Vent, # V2092SP-28. The Ultra-Fab Solar-Powered Plumbing Vent, # UF53-945001, is a solar powered unit so it does not actually wire into the electrical system of the trailer and may help to pull moisture out of your trailer. It is only 7 inches in diameter...
view full answer... - Replacement Motor for Ventline V2044 RV FanReplacement 110-Volt AC Fan Motor # BCD0390-01 is the motor for Ventline Roof Vent # V2128SP-01. The motor you need for your Ventline # V2044 is # BCD0314-00 if you have the 100 CFM model or # BCD0390-01 if you have the 75 CFM model.
view full answer... - Replacement Trailer Roof Vent and Installation KitMost RV roof vents are the standard 14 x 14-inch size which is the size that replacement lid # BV0554-03 fits. We can help you with just a new lid if that is all you need and we can also supply a whole new vent assembly if you prefer. If you want to install a complete new 14 x 14 vent you can select one from the page I linked. We have manual vents without fans like # V2092SP-28 and both 12V DC-power vents like # MA00-07500K and 110V AC-power units like # V2128SP-01. At the top of the...
view full answer...
- Replacement Fan Motor and Blade for Ventline Roof Vent V2128 with 110 Volt MotorThe correct replacement fan motor for your Ventline Roof Vent # V2128SP-01 is the # BCD0314-00. For a replacement fan blade you would want the part # BVA0311-02. For the motor you'd want # BCD0390-01.
view full answer... - Ventline Replacement 110V Fan Motor Rendering 100 Cubic Feet per MinuteThe Replacement 110-Volt AC Fan Motor for Ventline Ventadome Roof Vents # BCD0390-01 along with the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents with 110V Fan - 7" Blade # BVA0311-02 will render 100 CFM like # V2128SP-01.
view full answer... - Recommended Parts to Install 120V Roof Vent on Enclosed Cargo TrailerThe Ventline Roof Vent w/ 120V Fan # V2128SP-01 is exactly what you need since it is the only option that works on 120V AC power. You'll install this with the kit # 344270KITW and you'll need to build in some bracing under your roof if you don't already have provisions for an RV roof vent. I'm attaching an installation video where we installed a MaxxFan Deluxe on a Ford Transit and had to build in some bracing for the roof vent. Then for a vent cover I recommend the Fan-Tastic Vent Ultra...
view full answer... - What is the Standard Roof Size Opening for RVsThe standard RV roof opening is 14 by 14 inch, if there was a way you could open your roof to that size you could pretty easily install a roof vent like the Ventline Roof Vent w/ 110V Fan # V2128SP-01 that you referenced. But we do not have anything that's designed for a 10 by 10 or 12 by 12 inch opening.
view full answer... - Replacement Motor for Ventline 110-V Fan Powered Trailer Roof VentThe Ventline replacement vent motors # BCD0390-01 and # BCD0314-00 fit different models of their fan-powered trailer vents. Part # BCD0390-01 fits only Ventline vent model V2128, part # V2128SP-01. This motor has pigtail leads. Part # BCD0314-00 fits bathroom vent models V2262 and V2244 and offers higher air output: 100 cfm versus 75 cfm for part # BCD0390-01. This motor has shorter leads with a connector. If you can advise your vent model number we'll be glad to confirm the correct replacement...
view full answer... - Recommended Vent Fan For a Cargo Trailer To Work With Solar and Going Off GridSince you are wanting something compatible with solar it would be best to go with a 12 volt fan like the MaxxFan Deluxe Roof Vent # MA00-07500K. This particular fan has a built in rain guard so you will able to use it even in the rain. It has a thermostatically controlled remote that will allow you to set a temperature for the fan to turn on and off. It can also be manually controlled. If you chose to use a 120 volt Vent # V2128SP-01 you will need a Vent Cover # MA00-933066 to keep out...
view full answer... - Roof Vent with 110V-AC Powered Fan for 6 x 12-Foot Diamond Cargo TrailerMost square trailer roof vents are a common size, 14 x 14, and they require a roof opening of 14-1/4 x 14-1/4-inches. If your vent measures this approximate size then you can safely presume you have one of these standard-size roof vents. We do offer a 110V-AC powered fan in this size that is shown on the linked page, part # V2128SP-01 from Ventline. This vent features a manual-lift lid, on/off switch, insect screen and it also includes an internal trim piece (the garnish) for a clean installed...
view full answer... - Why Would Circuit Board of MaxxAir Roof Vent Fan Blow When Connected to Outlet PowerWhich specific MaxxAir fan are you using? The part number you referenced is for 12 volt applications and you are mentioning AC type power sources which will not be compatible.
view full answer... - Does Ventline Roof Vent Fan Run on 110V AC Power?You are correct; the Ventline Roof Vent w/ 110V Fan # V2128SP-01 does run on 110 volt AC power. This vent comes with a garnish and fits roofs 2-1/8" to 3-1/4" thick. I have added a link to a video review of this vent for you to take a look at as well.
view full answer... - Recommended 120VAC Trailer Roof Vent FanI do have an option for you but the only roof vent fan we offer in 110/120VAC is the Ventline Roof Vent part # V2128SP-01 which has a manual lift opening and powered fan. It installs into a standard 14" x 14" or 14-1/4" x 14-1/4" opening. In order to complete your installation you'll also need the Roof Vent Installation Kit part # 344270KITW.
view full answer... - 110 Rough Cut Opening Needed to Install Ventline Roof Vent w/ 110V Fan # V2128SP-01The Ventline Roof Vent w/ 110V Fan # V2128SP-01 that your referenced requires the standard rough cut opening right at 14-1/4 inch square. This is the only option that uses 110 volt power as well. I attached a review video for more info as well.
view full answer... - Power Consumption of Fan Motor in Ventline 110-Volt Trailer Roof Vent # V2128SP-01The 110-volt A/C motor in the Ventline Trailer Roof Vent # V2128SP-01 will draw a maximum of 0.77-amperes of current. This vent fits roofs from 2-1/8 to 3-1/4-inches thick and requires an installation kit # 344270KITW which includes screws and urethane sealer. I also recommend that after installation you also apply silicone sealer like # LT37464 to the exposed screw heads and mounting flange on the trailer's exterior.
view full answer... - Is Wiring Included with Ventline Roof Vent with 110V Fan # V2128SP-01The Ventline Roof Vent with 110V Fan # V2128SP-01 includes two pigtail wire leads and a wiring compartment for making the AC power connection to existing trailer wiring. No plugs or wiring harness are included but you can use butt connectors like # 05732-2. If you need an installation kit you can use part # 344270KITW which includes both mounting screws and sealant and that is suitable for trailer roofs made of metal or coated metal roof and wood (but not rubber). For a rubberized roof...
view full answer... - Replacement Vent with Multi-Speed and Thermostat for Airxcel 48000 A/C with 120V PowerI do have a solution for you, however, since the only 110V fan available, part # V2128SP-01, is a manual lift and only has one speed for the fan I don't believe it is quite what you are looking for. Instead what I recommend using is the MaxxFan Deluxe Roof Vent # MA00-07500K which has a thermostat and comes with a remote that you can use to lift and lower the lid as well as utilize the different fan settings. Another perk to this option is that it comes with a rain cover on it so you...
view full answer... - Trailer Roof Vent Recommendation for 110V Shore PowerThe MaxxFan Deluxe Roof Vent # MA00-06200K is designed for use with 12V power. If you wanted to power it using shore power then the best way to do that would be with a converter. Currently (as of February 2019) the only trailer roof vent available that is compatible with 110V shore power without a converter is the Ventline Roof Vent # V2128SP-01. The biggest difference between this vent and the MaxxFan deluxe is that this doesn't have a thermostat. The Ventline doesn't have a rain cover...
view full answer... - Replacing Broken Air Conditioner with Basic Roof Vent on 1981 Holiday Rambler Aluma Lite TrailerThe Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal # V2110SP-24 will work in the same location as your AC unit. It will utilize the exact same space for an easy swap. since you already have wiring to that location, you may want to consider using it to add a fan and the Ventline Roof Vent w/ 110V Fan - Manual Lift - 14-1/4" x 14-1/4" - White - Polar Trim # V2128SP-01 instead. In either case, I recommend the Installation Kit # 344270KITW.
view full answer... - Availability of the Ventline Roof Vent # V2128SP-01We do sell the Ventline Roof Vent # V2128SP-01 that you referenced. This has a 110V fan assembly that is rated for 100CFM. To install this unit you would also need the Kit # 344270KITW which includes all of the screws you need plus sealer. A review video has been linked for you to check out.
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Written by:
Raymond P
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Cole B
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Adam Y
Updated by:
Matthew E
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kelly
5/27/2015
Hi Robert,Im replacing my AC unit and would like to have a vent with a fan that blows air INTO our RV. As the old A/C hole has 110v wiring I would like to find a fan that uses 110v so I can use the existing wiring to power. Does the fan you bought from etrailer pull air OUT of RV or does it blow it in? I know that this fan is not reversible so I just need to know what direction it works. Thanks in advance for your assistance.